Any DIY for Crank Seal replacement? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bovi · 03-08-2016, 11:05 AM

Long story short,

I changed the oil pump last year and they changed the Crank Pulley bolt as usual and the oil seal. 2 months later, i looked at my engine bay and noticed an oil leak. Looks like its only when its hot and with the pulley it spread all around. Problem is the place i went closed so now im stuck with this problem. I was wondering if you guys are having a DIY about this oil seal. If i remember correctly, i'll need a need crank Bolt again, a front cover gasket and a new oil seal.

03-08-2016, 11:05 AM	#1
bovi Pedal 2 The Metal Drives: 2010 2SS/RS E-Force 6XXwhp Join Date: Nov 2013 Location: Montreal Posts: 144	Any DIY for Crank Seal replacement? Long story short, I changed the oil pump last year and they changed the Crank Pulley bolt as usual and the oil seal. 2 months later, i looked at my engine bay and noticed an oil leak. Looks like its only when its hot and with the pulley it spread all around. Problem is the place i went closed so now im stuck with this problem. I was wondering if you guys are having a DIY about this oil seal. If i remember correctly, i'll need a need crank Bolt again, a front cover gasket and a new oil seal. __________________ Camaro '10 ZL700 Package Edelbrock Supercharger with 3.25''pulley Custom Grind Cam Kooks Headers American Thunder Exhaust Rotofab Intake Lingenfelter Twin Pump 1000