02-11-2015, 12:43 PM | #1 |
Drives: 2014 Camaro 1LS Join Date: Jan 2015
Location: South Carolina
Posts: 7
|
CUSTOM BOWTIES: JUST SOME RANDOM HELP!
For anybody looking to add a kick to their bowties, I've found a pretty reliable, safe, and inexpensive way to go! Just left the local wrap shop in my town (Charleston, SC), and Chris at Wrapstar Studios did a matte black finish on the bowties for my Black Camaro. Charged me $40 bucks, said that it will last me a MINIMUM of 5 years depending on how well I take care of the car. For the '14 drivers, even left the texture the same! Only charged me $40 bucks, which is less than a lot of the vinyls you can get online to DIY.
Just a little help to spice up your Camaro! |
02-11-2015, 01:09 PM | #2 |
Drives: 2017 GRT 2SS/RS M6 Vert Join Date: Jan 2014
Location: Oro Valley
Posts: 1,200
|
Looks great. I did mine with a $10 can of Plastip and am quite pleased with the finished project. Lovin' those blacked out bow ties!
__________________
If it were more fun, it would be illegal!
|
02-11-2015, 02:08 PM | #3 |
FLOWTIE"
what about a Flowtie' treatment.
__________________
JRE 135 RWHP & 93 tune, SCT-4, ATI Superdamper, CAI, Elite2 CC , ID850 injectors, NGK TR7IX
NAPA Green Belt Lingenfelter 9.55” L220290709 (23%) pulley Lingenfelter LPE idler relocation bracket DynaTech SupperMaxx LT headers/Supercats BMR 1" lowering springs BMR toe rods, BMR trailing arms, Z/28 wicker bill extension. HAWK HPS, MRR228's, M/T ET SS's P305/35-20 |
|
02-11-2015, 02:47 PM | #4 |
ZYJ
Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014
Location: Miami, FL
Posts: 1,346
|
Plastidip, 7 bucks for a can, and enough for front back bowtie, side camaro lettering, badges, and more... =S
|
02-11-2015, 02:54 PM | #5 |
Drives: 2013 Camaro 1SS Join Date: Jun 2014
Location: Philadelphia
Posts: 83
|
Yeah man, it looks great, don't get me wrong, that being said you can find DIY vinyls for much less than $40.00, look on Ebay. That being said, it may not last you 5 years, (mine has been on a year with no signs of any issues) but even with replacing it twice you'd be at about 30 bucks tops. Here are some for $9.00 shipping included.
http://www.ebay.com/itm/VINYL-SHEETS...860411&vxp=mtr |
02-11-2015, 03:06 PM | #6 |
Go Vols!
Drives: 2011 Join Date: Feb 2012
Location: FL
Posts: 226
|
Leave the man alone. If he's happy, I'm happy. They did a good job on it.
|
02-11-2015, 03:47 PM | #7 |
ZYJ
Drives: 2017 1SS Camaro/6 speed Join Date: Sep 2014
Location: Miami, FL
Posts: 1,346
|
Lol, just trying to offer the public more options
|
02-11-2015, 04:41 PM | #8 |
Drives: 2017 2SS, 2023 3LT RS, 2011 2LT RS Join Date: Aug 2014
Location: Memphis
Posts: 362
|
I did mine myself. I had some extra black vinyl from another project. Use a hair dryer and a hobby knife. Took me just a few mins.
|
02-11-2015, 06:31 PM | #9 |
Drives: 2014 Camaro 2SS Join Date: Oct 2014
Location: Montgomery
Posts: 167
|
I tried the white vinyl but just couldn't get it to turn out the way I hoped. It looked fine 10ft away but not great up close. So I just ordered a custom painted white set from North American Tuning which costs about $100. About 3 weeks and they should be here.
|
02-11-2015, 10:51 PM | #10 |
Drives: 2011 LS V6 (M) & 2019 LS I4 (AT) Join Date: Jan 2015
Location: Newbury Park, CA
Posts: 346
|
I actually went to the "shop" at my local dealer and they told me that the "flowtie" can not be purchased unless you have a valid VIN for z28. I straight up told them I would just ask someone on the forums to PM me their vin. I couldn't believe they seriously wont sell the part unless you own a z28. Anyone wanna PM me?
|
02-12-2015, 01:18 AM | #11 |
Drives: '14 Red 2SS/RS/LS3 Join Date: Dec 2013
Location: Cedar Rapids, IA
Posts: 692
|
Looks good!
I'm cheap and had some leftover carbon fiber 3M vinyl, so I made a paper template of the bowtie (it's just a big "+" sign with the horizontal ends cut at an angle), then cut out the vinyl and stuck it on. It's tough to hide the gold underneath, but it looks great from 2 feet away and the front and rear bowties are the exact same size.
__________________
2014 Red Hot 2SS/RS/M6/NPP/Shifter/Nav/Roof/SilverRallyStripes/Airaid intake/GM StrutTowerBrace/50%-35%tint
|
02-12-2015, 08:27 AM | #12 |
|
I love my front bowtie and until recently I was able to get the rear one.
Hopefully this weekend I can install it.
__________________
Specs
TSP Stage 2 Boosted Cam 227/235 at 114 LSA Fore Innovation Triple pump staged (Walbro 342 primary and 2x Walbro 450 secondaries) Procharger D1x with a 3.85 pulley ID1050x Injectors Flex Fuel Sensor Monster LT1 Twin Disk Clutch Holley Sniper Efi Intake Manifold NW 103mm Boosted TB 747rwhp at 12psi on E85 |
02-12-2015, 03:28 PM | #13 |
|
I NEED THESE.
__________________
|
02-12-2015, 05:42 PM | #14 |
Drives: 2014 2SS M6 "CHRISTINE" Join Date: Mar 2014
Location: Boston Metro North
Posts: 2,916
|
I need to redo mine in the spring.
__________________
"But, House Mormont remembers. The North remembers! We know no King but the King of the North whose name is Stark. I don't care if he's a bastard. Ned Stark's blood runs through his veins. He's my king–from this day until his last day."
Mods: ARH headers and hi flow cats, VMAX ported throttle body, CAI air intake, Slowhawk Performance tuning |
|
|
|
|