Gm service sucks. - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Rcfiddy1 · 05-27-2014, 02:07 PM

So much for having pine belt chevy in freehold nj for actually doing thier job. I dropped off my camaro today for loud clunking in front end like a hammer bashing the frame while turning or going over a bump. Also had issues with steering wheel vibrating at 54 mph even after having new tires and rims installed. They blamed my heavily modified engine for the loud clunk in front end and my newly square setup rims for the wobble in steering wheel. Never before had I heard of such bs. Just do your job!

PAUL SS · 05-27-2014, 02:50 PM

Do you have new end links on your front sway bar? Make sure the jam nuts are tight.

05-27-2014, 02:07 PM	#1
Rcfiddy1 Sold car... Drives: 2010 Rally Yellow 2SS/RS #37115 Join Date: Oct 2009 Location: Manalapan, New Jersey Posts: 2,019 View My Garage	Gm service sucks. So much for having pine belt chevy in freehold nj for actually doing thier job. I dropped off my camaro today for loud clunking in front end like a hammer bashing the frame while turning or going over a bump. Also had issues with steering wheel vibrating at 54 mph even after having new tires and rims installed. They blamed my heavily modified engine for the loud clunk in front end and my newly square setup rims for the wobble in steering wheel. Never before had I heard of such bs. Just do your job! __________________ Build Thread ECS Novi 1500 Supercharged, LS3 conversion, Small blower cam, Alky Meth injection, 3:45 rear, BMR Suspension parts, 1LE Sways, Billy Boat ZL1 dual mode exhaust.

05-27-2014, 02:50 PM	#2
PAUL SS The Mark of Excellence Drives: 2010 ABM 1SS RS LS3 Join Date: Jan 2009 Location: Smallest State in the Union Posts: 8,690 View My Garage	Do you have new end links on your front sway bar? Make sure the jam nuts are tight. __________________ BMR, CAI, DynoMax, Elite Eng., Hurst, Jannetty, Clear Image Headers & Hi Flow cats, Jet Hot, LSR, TSW, VMax, Vredestein