Removal of front bowtie questions - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

slick rick · 06-17-2009, 02:10 PM

Has anyone removed the front bowtie on the grille? Is it glued in place or secured by clips?

MONEY · 06-17-2009, 02:18 PM

1st. Open the glove box, in the back there is a nut, turn the nut untill all the tention is off the bolt.
Next pop the hood and look for the little red anchor rod( pass. side below the a/c). unbolt all the retaining bolts and remove the rod.
Go back to the glove box, A phillips head screw will now be visible. unscrew it and you will feel the slack pull back.
Finally get your kahooter ring puller and put it on the embelem, turn 3 turns and it comes right off!

live2well · 06-17-2009, 02:27 PM

hmmmmm.......

Hylton · 06-17-2009, 03:11 PM

Quote:

Originally Posted by slick rick

Has anyone removed the front bowtie on the grille? Is it glued in place or secured by clips?

It doesn't matter really. If you remove it, you will have a large impression of the bowtie since it is inset into the grill.

slick rick · 06-17-2009, 03:18 PM

I took a picture from behind the grille. It looks like it's clipped in.

Is that what it looks like to you guys?

slick rick · 06-17-2009, 03:19 PM

Quote:

Originally Posted by Hylton

It doesn't matter really. If you remove it, you will have a large impression of the bowtie since it is inset into the grill.

I'm trying to remove it so I can have it painted.

Hylton · 06-17-2009, 03:20 PM

Quote:

Originally Posted by slick rick

I'm trying to remove it so I can have it painted.

Oh okay. You should be fine then. Pry it off with a plastic body filler spreader.

MONEY · 06-17-2009, 04:26 PM

Quote:

Originally Posted by slick rick

I took a picture from behind the grille. It looks like it's clipped in.

Is that what it looks like to you guys?

Thats a good picture! And I see you have some good ol' Vascular arms! You must work-out!

jdurhan · 06-17-2009, 06:27 PM

Quote:

Originally Posted by MONEY

Thats a good picture! And I see you have some good ol' Vascular arms! You must work-out!

Good eye

Bell040 · 08-17-2009, 10:06 PM

anyone done this to the rear bowtie?

If so, post pics and make this a sticky

shroomjohn · 08-18-2009, 12:20 AM

I think the rear bowtie is just stuck on w 3m tape heat it up and you can take off but youll need new tape to get it back on good luck

slick rick · 08-18-2009, 01:10 PM

Quote:

Originally Posted by Bell040

anyone done this to the rear bowtie?

If so, post pics and make this a sticky

http://www.mylrs.com/blogs/lrs/archi...mblem-kit.aspx

Toyaholic · 10-20-2010, 11:13 PM

Quote:

Originally Posted by Hylton

It doesn't matter really. If you remove it, you will have a large impression of the bowtie since it is inset into the grill.

Does anyone make a filler piece for this?

ctk1 · 10-21-2010, 08:37 AM

SLP makes a filler pirce called the landing pad. You can install SS or RS emblems on it. I believe Revolution Motorsports has just a filler piece that fills in the bowtie indentation but completes the lines of the stock grill.

06-17-2009, 02:10 PM	#1
slick rick SoCal Mayhem Drives: 2010 Camaro 1SS/RS Join Date: Aug 2008 Location: Foothill Ranch, CA Posts: 5,488 View My Garage	Removal of front bowtie questions Has anyone removed the front bowtie on the grille? Is it glued in place or secured by clips? __________________

06-17-2009, 02:18 PM	#2
MONEY Black 2ss/rs Mid-August Drives: 1999 Silverado, 1978 Corvette Join Date: Jun 2009 Location: Texas Posts: 65	1st. Open the glove box, in the back there is a nut, turn the nut untill all the tention is off the bolt. Next pop the hood and look for the little red anchor rod( pass. side below the a/c). unbolt all the retaining bolts and remove the rod. Go back to the glove box, A phillips head screw will now be visible. unscrew it and you will feel the slack pull back. Finally get your kahooter ring puller and put it on the embelem, turn 3 turns and it comes right off! __________________ BLACK 2SS/RS INFERNO ORANGE INTERIOR (Ordered 6-10) ....... Pratt & Whitney J58 Jet Engine On Order, (Swap Details Soon!)

06-17-2009, 02:27 PM	#3
live2well Drives: 2010 VR 2SS/RS A6 Join Date: Oct 2008 Location: Odenton, MD Posts: 688	hmmmmm....... __________________ Intelligence plus character that is the goal of true education. BrianC. :flag2:

06-17-2009, 03:18 PM	#5
slick rick SoCal Mayhem Drives: 2010 Camaro 1SS/RS Join Date: Aug 2008 Location: Foothill Ranch, CA Posts: 5,488 View My Garage	I took a picture from behind the grille. It looks like it's clipped in. Is that what it looks like to you guys? Attached Images __________________

08-17-2009, 10:06 PM	#10
Bell040 Drives: 2SS/RS - Black - GFX Join Date: Nov 2008 Location: B'ham, Alabama Posts: 2,458 View My Garage	anyone done this to the rear bowtie? If so, post pics and make this a sticky __________________ Ordered: 10-13-08 Built: 3-30-09 (#1691) Recieved: 6-12-09 Blacked out, Cammed (Lunati Voodoo 233/245, .578/.598 @114°, +4°), ARH LTs, VR OTR CAI, Cutouts, and lots of other fun mods.

08-18-2009, 12:20 AM	#11
shroomjohn Drives: Golden Eagle Join Date: Jun 2008 Location: No Posts: 1,134 View My Garage	I think the rear bowtie is just stuck on w 3m tape heat it up and you can take off but youll need new tape to get it back on good luck __________________ Loving this car!

10-21-2010, 08:37 AM	#14
ctk1 Camarofanatic Drives: 1969 SS, 1998 RS, 2010 VR 2SS/RS Join Date: Sep 2008 Location: Gallitzin PA Posts: 1,433	SLP makes a filler pirce called the landing pad. You can install SS or RS emblems on it. I believe Revolution Motorsports has just a filler piece that fills in the bowtie indentation but completes the lines of the stock grill.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
how to remove front "SS"	pharmd	Cosmetics and Lighting Modification Discussions	15	06-17-2009 01:04 AM
Front Facia Removal	King Mouse	5th Gen Camaro SS LS LT General Discussions	13	06-08-2009 03:40 PM
No confirmation number?	jamesc1123	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	12	02-21-2009 09:49 PM
1SS standard equipment and options	Tran	Wiki	1	11-05-2008 03:34 PM
1LS standard equipment and options	Tran	Wiki	0	10-18-2008 09:13 PM