Vengeance Racing | Limited Edition 2010 Camaro Package

[Ron@Vengeance]

Vengeance Racing is proud to introduce our "Limited Edition" 2010 Camaro! This unique Camaro is the result of numerous requests for a Vengeance Racing "Package". With years of experience building collectible Fourth Generation Camaros while at www.GMMGInc.net and having built over 1200 unique LSX combinations over the past 10 years, we felt it was time to create a package for our loyal customers. Our Limited Edition Package is based on performance with subtle changes to the interior and exterior of the vehicle to set the Camaro apart.

With six separate phases available from suspension & exhaust to a race ready 6.2 liter all motor setup to a twin turbo system capable of making 1200 horsepower at the crankshaft, Vengeance has your needs covered.

Only fifty of these unique Camaros will be built per year. Each one will be fully documented and include its own serial number. If you are interested in owning one of these Limited Edition Camaros feel free to contact Vengeance Racing at 678.513.7105.

The Limited Edition Packages Include:
-Custom "Vengeance Limited Edition" Badges on Exterior of Vehicle-
-Owners Plaque on Interior of Vehicle - Serial Number/HP Rating/Phase/Owner-
-Custom Hood Spears with Reverse "SS"-
-GM Heritage Grill with "Modern SS" Insert-
-Satin Black Sail Panel/Light Bezels/Lower Grill/Foglights-
-Powder-Coated Brake Calipers - Color Matched with Vengeance Logos-
-Zinc Coated High Performance Cross Drilled Rotors-
-Stainless Brake Lines-
-Laminated Build Sheet/Window Sticker-

Phase I | 495 HP
-Pfadt Coil Springs-
-Pfadt Racing Street Sway Bar Kit-
-180 Degree Thermostat-
-MGW Short Throw Shifter with Race Knob-
-Vengeance Racing 25% Underdrive Pulley Kit-
-American Racing 1-7/8" Longtube Headers with Hi-Flow Catted X-Pipe
-Vararam Induction
-Custom Dyno & Street Tuning via EFI Live-

Phase II | 550 HP
-Includes Phase I-
-Pfadt Adjustable Sway Bars-
-Katech C5R Timing Chain-
-Vengeance Racing VRX Series Camshaft-
-Comp 5/16 7.400" Hardened Pushrods-
-Comp 26926 Dual Spring Kit Complete with Ti Hardware-
-Melling High Volume Oil Pump-

Phase III | 575 HP
-Includes Phase II-
-GM 6.2 MLS Head Gaskets-
-ARP LS2/LS3 Head Bolt Kit-
-Comp Drop In High Performance Lifters-
-Vengeance Racing CNC Stage I LS3 Cylinder Heads-

Phase IV | 650 HP
-Includes Phase III-
-Callies Forged 4.100" Crankshaft-
-Callies Forged 6.125" Connecting Rods-
-Diamond Forged Piston Set/Moly Ring Pack-
-Clevite Rod Bearing Kit - MICB663HN-
-Clevite LS Main Bearing Kit - MIMS2199H-
-Complete Gasket Kit-
-Port/Polish Customer Factory Throttlebody
-Port Customer LS3 Intake Manifold-

Phase V | 700 HP
-Includes Phase II-
-Magnuson TVS 2300 Supercharger with Upgrade 3.0" Pulley-
-Upgrade Customer LS3 Fuel Injectors to 60 lb/hr-
-Kenne Bell Boost-a-Pump for Forced Induction-
-NGK TR6 Plugs-

Phase VI | 1200 HP
-Call for Details-

[hisinc]

Are those custom hoood spears a gloss, satin, or flat black? Is the same finish on the rear blackout between the lights?

Looks great!

[cdigiovanni]

please explain phase 1 Phase I | 495 HP
-Pfadt Coil Springs-
-Pfadt Racing Street Sway Bar Kit-
-180 Degree Thermostat-
-MGW Short Throw Shifter with Race Knob-
-Vengeance Racing 25% Underdrive Pulley Kit-
-Custom Dyno & Street Tuning via EFI Live-

wow must the shift knob that gives all that HP?!?!!?
Is that rwhp? SAE or STD dyno?

i have SAE 462hp with minor engine mods
rockers
tune
cai
pipes
pulleys
tune

[Ron@Vengeance]

Originally Posted by hisinc

Are those custom hoood spears a gloss, satin, or flat black? Is the same finish on the rear blackout between the lights?

Looks great!

They are satin.

Thanks!

Originally Posted by cdigiovanni

please explain phase 1 Phase I | 495 HP
-Pfadt Coil Springs-
-Pfadt Racing Street Sway Bar Kit-
-180 Degree Thermostat-
-MGW Short Throw Shifter with Race Knob-
-Vengeance Racing 25% Underdrive Pulley Kit-
-Custom Dyno & Street Tuning via EFI Live-

wow must the shift knob that gives all that HP?!?!!?
Is that rwhp? SAE or STD dyno?

i have SAE 462hp with minor engine mods
rockers
tune
cai
pipes
pulleys
tune

Thanks for catching that. Forgot to add the Vararam intake and longtubes to the list. FWIW, all #s are rated at the flywheel. Most performance packages are rated this way to avoid all of the confusing drivetrain configurations.

[PQ]

Originally Posted by Ron@Vengeance

Phase V | 700 HP

-Includes Phase II-

-Magnuson TVS 2300 Supercharger with Upgrade 3.0" Pulley-
-Upgrade Customer LS3 Fuel Injectors to 60 lb/hr-
-Kenne Bell Boost-a-Pump for Forced Induction-
-NGK TR6 Plugs-

Sooooo, with or without a car already?

[Ron@Vengeance]

Ship it down PQ.. We can upfit yours no problem