11-14-2015, 10:28 PM | #1 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
CEL Doesn't Work
Has anyone had the problem of CEL not working? As in the bulb doesn't work? If so, what did you have to do to fix it?
|
11-15-2015, 07:39 PM | #2 |
Drives: 2010 Camaro 1LS 3.6 LLT V6 325 HP Join Date: May 2009
Location: LS
Posts: 4,242
|
Had this problem on my sons eclypse. Put the ECU harness on and off a few times and it started working and got the code.
Probably and electrical connection somewhere.
__________________
2010 Camaro Auto, Inferno Orange, Titanium Interior, Gearhead Wheels AIRAID CAI
|
11-16-2015, 03:50 PM | #3 |
Mine doesn't work either...
__________________
K&N CAI, Gloss Black and Orange bow ties, IO brake calipers, RS headlights.
|
|
11-16-2015, 06:36 PM | #4 |
Drives: 2010 Camaro 1LS 3.6 LLT V6 325 HP Join Date: May 2009
Location: LS
Posts: 4,242
|
Try it, what do ya got to loose?
__________________
2010 Camaro Auto, Inferno Orange, Titanium Interior, Gearhead Wheels AIRAID CAI
|
11-16-2015, 07:46 PM | #5 |
Drives: 2010 SW Camaro 2SS RS 6M Join Date: Aug 2012
Location: Van Alstyne, TX
Posts: 97
|
When you first cycle the key in the ignition, the panel does a bulb test. See if the CEL illuminates at that time. If it doesn't, then the led/bulb is probably bad. Without seeing the PCB, you may be able to remove the bad and solder in a new one.
|
11-17-2015, 10:34 AM | #6 |
Drives: 2011 CGM Camaro LS A6 Join Date: Jan 2011
Location: San Antonio, Texas
Posts: 10,305
|
No, the bulb does not come on during the startup cycle. Is there a diy on how to do this?
|
11-19-2015, 01:45 PM | #7 |
Drives: 2010 Camaro 1LS 3.6 LLT V6 325 HP Join Date: May 2009
Location: LS
Posts: 4,242
|
There is a DIY on pulling the cluster and bezel. Its in that section.
__________________
2010 Camaro Auto, Inferno Orange, Titanium Interior, Gearhead Wheels AIRAID CAI
|
11-19-2015, 04:57 PM | #8 |
Drives: 2011 2SS/RS M6 Join Date: Oct 2015
Location: Utah
Posts: 1,940
|
If the CEL indicator does not turn on during the self check it is an LED/internal wiring issue. The IPC does a bulb check that is independent of the ECM control.
|
11-21-2015, 02:49 PM | #9 |
Drives: 2010 Camaro 1LS 3.6 LLT V6 325 HP Join Date: May 2009
Location: LS
Posts: 4,242
|
Can you read any codes?
__________________
2010 Camaro Auto, Inferno Orange, Titanium Interior, Gearhead Wheels AIRAID CAI
|
|
|
Thread Tools | |
|
|