12-04-2011, 05:32 PM | #1 |
Drives: 15' C7, 10' Camaro, 02' Camaro Join Date: Oct 2011
Location: Pompano Beach
Posts: 35
|
Lashway Motorsport's new badass pushrods!
The highest quality 5/16" pushrod for the LSx applicaton! The BADDEST pushrod on the market! •True 3 Piece Design •240-degree Ends For Ultimate Rocker Arm Clearance •Say goodbye to Pushrod Deflection and hello to increased valvetrain Strength and Stability, especially at higher RPM levels! SPECS: •Highest quality 4135 seamless Chromoly tubing for extreme applications •Straight tube any length •Salt bath nitride surface treatment for outstanding wear properties and strength 180,000 psi tensile strength •240-degree ball for excellent rocker arm cup clearance •Tips are made from high impact, wear resistant 8620 barstock that is case hardened and cryogenically treated and tempered •180,000psi tensile strength •.083 wall thickness •Smaller oiling passages keeps your oil where it needs to be! Advantages over the one piece pushrod design: The 3-piece design allows the pushrod ends to be CNC machined as opposed to pressed or formed, this allows the pushrod’s main body to be thicker and of a stronger alloy They are available in any size by .050 increments. example: 7.400, 7.450, 7.350 LASHWAY MOTORSPORTS'S 3-PIECE PUSHRODS |
12-04-2011, 06:02 PM | #2 |
Slow Turtle
|
Who makes them?
|
12-04-2011, 08:42 PM | #3 |
Drives: Camaros, Vettes, Trucks Join Date: Dec 2010
Location: Fort Lauderdale, FL
Posts: 941
|
Hey Josh, tell em about that 1-pc rod we removed from an LS1 the other day....
OUCH |
12-05-2011, 08:57 PM | #4 |
Drives: 15' C7, 10' Camaro, 02' Camaro Join Date: Oct 2011
Location: Pompano Beach
Posts: 35
|
we recently removed some 1piece designed pushrods from a 30K+ mile high-pressure valvespring car and the pushrod had actually grounded down about .050" to the point it could be heard in the valvetrain, not a usual problem but never would of happened with our 3piece pushrods.
|
12-05-2011, 09:10 PM | #5 |
LVL 50 Troll Stomper
Drives: 2010 Camaro Join Date: Feb 2008
Location: Indianapolis
Posts: 3,463
|
__________________
|
12-06-2011, 12:30 AM | #6 |
Drives: 15' C7, 10' Camaro, 02' Camaro Join Date: Oct 2011
Location: Pompano Beach
Posts: 35
|
they are built with the posted specs by an american company with the highest possible quality, thanks for asking
|
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Lashway Motorsports 2011 SS/L99 with badass stall converter! | Erik@lashway | USA - Florida | 16 | 02-02-2012 06:05 PM |
LASHWAY MOTORSPORTS, INC. A+++ | TheSeifelTower | Vendor and Seller review / feedback / experiences | 3 | 10-21-2011 02:03 PM |
Lashway Motorsports introduces their own line of 3-piece pushrods for LS applications | Erik@lashway | USA - Florida | 4 | 08-25-2011 06:45 AM |
Broward and West Palm 5th Gen meet at Lashway Motorsports, Inc. | Erik@lashway | USA - Southeast | 37 | 06-22-2011 08:47 AM |
Lashway Motorsports! A+++ Custom Shop | TheSeifelTower | USA - Southeast | 3 | 01-27-2011 10:48 AM |