|05-02-2010, 04:18 AM||#1|
Drives: 09 C6
Join Date: Dec 2009
Location: Houston, TX
Body shop messed up this 2010 Camaro.. and I fixed it!
I had detailed this camaro back in Febuary, and recently he had a SUV back into his front bumper, so he took it to a Chevy Dealership to get it fixed. Well they fixed it.. and he told them specifically not to touch the rest of the car since he had it detailed. Well.. of course they had to cut and buff the front bumper, but I think what happened was they accidentally hit part of the hood with their rotary buffer, tried to fix it and failed miserably and made it much worse!
He brought it to the dealer's attention that there were so many swirls and holograms on the hood and bumper and it was unacceptable. They told him they would fix it, so he left it with them for an additional week. After a week, he came back and it was worse than the week before! Haha. So he called me and I told him I would fix it, and see if they would reimburse him. They gladly handed over the keys and I went to work.
The pictures look BETTER than it did in person.. it was absolutely JACKED up. Holograms everywhere, swirls were even worse. They went halfway up the hood.
When he brought it to me, the camera mainly picked up the holograms... but the entire hood and bumper were covered in COBWEBS of swirls.. I cringed when I saw it:
So I went to work. It took about 7 hours of correction on the hood and bumper alone. I had to break out the big guns to correct what they did... they hit it hard! I used 2 machines, 4 different pads (yellow, orange, white and grey) and 4 different compounds.
I used Meg's 105, followed again with 105, followed with Menzerna's SIP, then Meg's 205, finally jeweled with Menzerna's PO85RD.
I tried using just Meg's 105 and it didn't get all of it out. Then I tried it again with Meg's 105 on a stronger machine and pad and it would mar the paint. 205 would not clear out the harder marring, so I had to follow with a ligher swirl remover and then 205 and then polish it up with PO85RD.
After it was all said and done.. here's what I got:
And here are some random correction shots:
Swirls all around the edge of the bumper.. you know the previous "detailer" didn't pay attention to avoid corners. So I had to be careful not to rip through this fresh clear and paint.
After careful buffing with a compound:
And finally hitting it with a finishing polish:
Unfortunately, this is an everyday issue with body shops.. they don't put the time and care needed to get your care pristine. As long as it looks good in "most" light it looks good to them.
|05-02-2010, 08:14 AM||#5|
Drives: 2011 2SS RS, 1968 ragtop
Join Date: Apr 2009
Great work! This happened to me as well. When I picked the car up they had it all cleaned up for me after the paint and body work following an accident.
I showed them the swirls, most likely applied by the kid who washed and dried it. I had them get rid of the swirls, and they did a nice job.
1968 Camaro convertible, LS1 & T56, Texas Speed 228R cam, 3.73 posi, 17" Torque Thrusts
2011 2SS/RS, LS3, M6, IOM in and out, factory Hurst short throw, GMPP axleback exhaust
Last edited by ckaram; 05-15-2010 at 08:36 AM.
|05-02-2010, 08:33 AM||#6|
Drives: Jeep srt8
Join Date: Nov 2009
Location: Westchester NY
wow that came out great
2010 2ss/rs inferno orange with inferno interior with painted body kit.
MODS 20% tint, Borla Atak, BBK Headers no cats, Cold air induction cai, custom tune.
2007 JEEP SRT8 11 Second club
V-3 Vortech Supercharger, Borla S, 180 t-stat, diablo sport predator,
Eibach lowering springs, shorty antenna, crossed drilled and slotted rotors, dash hawk,
20% tint,tinted tails, rammedic23 fiberglass hood.
|05-02-2010, 05:10 PM||#12|
More human than human
Drives: 2010 IOM 2SS/RS
Join Date: May 2008
Location: The mouth of hell
I may have to visit you when I go down to Houston to visit family.The guys that did my stripes did not do a great job of getting those out after they painted it.
1100 - 10/22/2008
3000 - 05/27/2009
3300 - 06/06/2009
3800 - 06/29/2009
4B00 - 06/29/2009
Warehouse 13 survivor
Blood stains,speed kills,fast cars,cheap thrills,rich women,fine wine,i lost my sense i lost control i lost my
|05-04-2010, 09:08 AM||#14|
Drives: 2010 Blk/Gry SS/RS M6
Join Date: May 2009
Great job Wally!!!
I can atest to his work also. I had my car done by him right before our Kemah car show. I had alot of swirl marks and "other marks" and he got them out and made the black paint beautiful again!!!
I washed it for the first time Sunday, and low and behold, water spots that detail spray won't take out. I have to wash in the sun, and now I need to find out how to get rid of them.
I highly recommend him for your detail work in Houston, great job and great price in my opinion!!!
Ordered 10-13-08 2SS/RS M6 BLK/GRY
Delivered 6-11-09 - Woo Hoo!!!
Hey Houston locals--------
Join the H-Town Camaro Club
|05-04-2010, 10:34 AM||#15|
Drives: 2010 Camaro 2LT/RS
Join Date: Jan 2008
Location: Cortland Ohio
2010 Camaro 2LT / RS - Black w/IO interior & M6
Sporting MRT V1, Hurst short throw, and Injen long tube and loving it!!!
Also, over 125,000 miles and going.
|05-04-2010, 06:47 PM||#17|
Drives: 2010 1SS CAMARO/GBA/M6- sold.
Join Date: Oct 2009
Location: Houston, Texas
1SS @ home. 12/14/2009
|Thread||Thread Starter||Forum||Replies||Last Post|
|An interesting Camaro (and GM) story! I just bought my 2010 Camaro!||Camarodriver||Camaro Price | Ordering | Tracking | Dealers Discussions||12||11-28-2010 04:52 PM|
|Drag Racing Suspension Kits||Info@PeddersUSA.com||Suspension / Chassis / Brakes||25||02-21-2010 09:48 PM|
|Official Camaro Convertible CONCEPT Press Release||Tran||Camaro Convertible Forum||12||11-18-2009 08:05 PM|