Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Emblempros
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Sponsors Classifieds Marketplace > Interior Parts & Accessories

Interior Parts & Accessories All interior parts and accessories.

View our official forum sponsors list.

Reply
 
Thread Tools
Old 10-07-2010, 08:19 PM   #1
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
EMBLEMPROS.COM Underhood bowties GM licensed!!

We now have the bowties for under the hood on our website in three styles.
1) Plain http://www.emblempros.com/inc/sdetail/8869
2) Etched logos http://www.emblempros.com/inc/sdetail/8870
3) Etched logos. and emblems http://www.emblempros.com/inc/sdetail/8872

I will be populating this thread with some pictures, and more as we go along. Let starts with these:



























Bowties are available in mirror, and brushed finishes. GM logos, and custom etching if desired.
The ones pictures above are the hidden fastener version. Not on the website yet, and for now there is a $20.00 additional cost for doing that.
Not available for sale yet. but will be next week. For now we only have the versions with the visible fasteners.


Thanks, Roger
__________________

Last edited by dragonZ28; 10-11-2010 at 07:13 PM.
dragonZ28 is offline   Reply With Quote
Old 10-08-2010, 09:08 AM   #2
tjd24
Thank you Oshawa/St.Cats!
 
tjd24's Avatar
 
Drives: 2010 2LT RS 2G1FC1EV4A9103434
Join Date: May 2009
Location: NW NJ
Posts: 3,445
Ordered - thanks Roger for all the work and patience in getting these to market. I went with:

2010 Camaro

2LT RS (silverframe, red fill on brushed bow tie)

#3434 4/15/09 (built/born date)
__________________
http://www.hubgarage.com/mygarage/tjd24 http://ny5thgen.com/TJD_RS.htm
#3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 & booked for #5
tjd24 is offline   Reply With Quote
Old 10-08-2010, 10:05 AM   #3
CamaroSSRSL99
Heartbeat of America
 
CamaroSSRSL99's Avatar
 
Drives: 2010 Camaro 2SSRS, 1967 Camaro
Join Date: Jul 2010
Location: Wyoming
Posts: 263
Do you have a picture of the brushed finish? How does the hidden fasteners work? Will you keep us posted when this is available? Thanks...awesome looking product.
__________________
CamaroSSRSL99 is offline   Reply With Quote
Old 10-08-2010, 10:27 AM   #4
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
Here is the link for the pictures,

http://www.emblempros.com/inc/sdetail/8872

1) Click on the more pictures link at the bottom of the mail picture.
More pictures will come up.
2) The mirror ones have the clouds and sky reflecting in them.
3) The brushed ones do not.

The brushed stainless finish is exactly like the finish on stainless kitchen appliances.

Thanks, Roger
__________________
dragonZ28 is offline   Reply With Quote
Old 10-08-2010, 12:49 PM   #5
unccescape
 
unccescape's Avatar
 
Drives: Camaro 2LT/RS CGM, Ford Escape
Join Date: May 2009
Location: Charlotte, NC
Posts: 163
I am really curious on how these attach to the pad. I understand the bolts and you have to put holes in the pad but I love to see pictures or step by step instructions. Hidden fasteners sound really interesting as well.

Oh by the way, I love my Dash Plaque and I can wait to receive the Hydrocoated Fuse Box cover that was ordered last week! Great job on the innovative Camaro accessories!
__________________
Ordered 2LT/RS CGM - 2/20/10
1100, Preliminary order accepted - 2/22/10
2000, Order accepted by GM - 3/15/10
2500, Order preferenced - 3/16/10
3000, Order accepted by production control - 3/18/10 TPW 4/19/10
3300, Order scheduled for production - 4/7/10
3400, Order broadcast - 4/15/10
3800, Order produced - 4/20/10 #112,852
4000, Available to ship - 4/21/10
4200, Shipped - 4/22/10
5000, Delivered to the dealer - 5/6/10
6000, Delivered to the customer - 5/7/10

5th Gen Camaro's of the Carolinas
unccescape is offline   Reply With Quote
Old 10-08-2010, 08:50 PM   #6
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
I need to write the step by step installation instructions, with drawings tomorrow. I will include this in with each bowtie, and most likely send out as an email attachment as well.
The simple method is that:
1) Place the bowtie up to the hood insulation and make a mark on your hood liner where the bolt holes are.
2) Cut small slits, or "X's" at those locations.
3) Place the bolts through the bowtie, and the slits in the liner one at a time, and install the lock nuts, and washer we are providing you, on the back side.

It is important to note that the entire liner does not need to come off. This by only removing the four front plastic inserts on the liner. This will take about 10-15 minutes if you have all of the tools at hand. And in no way can these bolts touch your hood.

Thanks, Roger
__________________
dragonZ28 is offline   Reply With Quote
Old 10-08-2010, 09:52 PM   #7
CaniacFan


 
CaniacFan's Avatar
 
Drives: '10 2SS/RS CGM #75,288
Join Date: Aug 2009
Location: Wake Forest, NC
Posts: 3,954
Ordered my custom underhood bowtie yesterday, can't wait to get my package in the mail.. Thankx Roger, you guys are great for the Camaro community. Love the products you continually offer..

Keep up the great work. Lori
CaniacFan is offline   Reply With Quote
Old 10-10-2010, 10:23 AM   #8
ZombieEatsYou

 
ZombieEatsYou's Avatar
 
Drives: "Bmblbee" 2010 RY 2SS/RS. VIN 12043
Join Date: Oct 2008
Location: Waldorf, Maryland
Posts: 1,276
Would it be possible to get a logo like this in lieu of the standard SS, RS, etc.?
Attached Images
 
ZombieEatsYou is offline   Reply With Quote
Old 10-10-2010, 02:11 PM   #9
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
Quote:
Originally Posted by ZombieEatsYou View Post
Would it be possible to get a logo like this in lieu of the standard SS, RS, etc.?
We contacted Hasbro twice about some of these autobot head logos, and have not heard back. So, we cannot make autobot/decepticon logos until we talk to them.
If you can find a large enough decal, you could place one on there yourself.
We can just leave a spot empty for you.

Thanks, Roger
__________________
dragonZ28 is offline   Reply With Quote
Old 10-10-2010, 03:14 PM   #10
ZombieEatsYou

 
ZombieEatsYou's Avatar
 
Drives: "Bmblbee" 2010 RY 2SS/RS. VIN 12043
Join Date: Oct 2008
Location: Waldorf, Maryland
Posts: 1,276
I guessed that'd be the case. What can you tell us about the plan to light these? Is the plan to light the outside border of the bowtie or from inside the center logos?
I'm just imagining what it would look like lit from the inside but I'm guessing your going to use LED fasteners.
ZombieEatsYou is offline   Reply With Quote
Old 10-10-2010, 03:38 PM   #11
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
Quote:
Originally Posted by ZombieEatsYou View Post
I guessed that'd be the case. What can you tell us about the plan to light these? Is the plan to light the outside border of the bowtie or from inside the center logos?
I'm just imagining what it would look like lit from the inside but I'm guessing your going to use LED fasteners.

We absolutely know it can be done. We just need to sit down and do some design work to make it happen. We can try multiple methods to see what works best. Lighting these will add costs to them. The cost would depend on which method is chosen, and the extra time we need put into one, to make it lit.
When we were making the lighted door sills, we were not sure about costs on those either, until we settled on which way we were going to do it.
Our initial thoughts are that you guys may not want to pay what it will cost to do it.

Thanks, Roger
__________________
dragonZ28 is offline   Reply With Quote
Old 10-10-2010, 08:13 PM   #12
ZombieEatsYou

 
ZombieEatsYou's Avatar
 
Drives: "Bmblbee" 2010 RY 2SS/RS. VIN 12043
Join Date: Oct 2008
Location: Waldorf, Maryland
Posts: 1,276
Guess it doesn't really matter if you can't do an autobot logo. How do I order one with no logo? Maybe you can add "none" to your drop down list?
ZombieEatsYou is offline   Reply With Quote
Old 10-10-2010, 09:12 PM   #13
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
Quote:
Originally Posted by ZombieEatsYou View Post
Guess it doesn't really matter if you can't do an autobot logo. How do I order one with no logo? Maybe you can add "none" to your drop down list?
We actually do those logos for free. So, no one will select "none"
If you can tell me what you want on it, I can sell it to you directly with the text you want.
We sell them plain with nothing on them at all.
http://www.emblempros.com/inc/sdetail/8869 $74.99

We sell them with whatever etching you want: "that we are allowed to do"
http://www.emblempros.com/inc/sdetail/8870 $84.99

You can get a bowtie with two lines of text on top, and two lines of text on the bottom, with the center empty for $98.00
This is an excellent deal, and you can do what you like with the empty location.

Please let me know. If the website does not allow what you want, I can make it for you anyway. We try to set the sale pages up for a lot of different options so that the customers can get what they want.
However, there are a lot of items we make every week, that are generated from one on one sales to customers.

Thanks, Roger
__________________

Last edited by dragonZ28; 10-10-2010 at 09:39 PM.
dragonZ28 is offline   Reply With Quote
Old 10-11-2010, 11:47 AM   #14
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
Bowties on the table.
I am sure we will see some installed pictures of these from you guys, and gals later this week.
























Making some more today. These look great. It was a long wait for approval, but worth it.

Thanks, Roger
__________________

Last edited by dragonZ28; 10-11-2010 at 07:13 PM.
dragonZ28 is offline   Reply With Quote
Old 10-12-2010, 08:55 PM   #15
2010CamaroRS
Driver of the Blue Demon
 
2010CamaroRS's Avatar
 
Drives: '13 Jeep Wrangler 4WD
Join Date: Jan 2010
Location: Westfield, MA
Posts: 2,507
how do the hidden fasteners work?
__________________
New England Camaro 5


The Few, The Proud, The Aqua Blue Metallics

DT shorties.BBK Intake.FlowMaster AT.Eibach 1'' drop.Hurst Short Throw (44% reduction).Unrestricted Motorsports Gen 1 Style Rear Spoiler.Custom Aqua Blue Metallic Interior Panels.RS Embroidered Head Rests.Interior LED by Oracle.Illuminated Bowtie by Oracle.Footwell LED by Oracle.Grille LED by Oracle.Functional Headliner Console Toggle Switches for LED Lighting.Aqua Blue Engine Cover.RotoFab Radiator Cover.Aqua Blue Fuse Box Cover from RPI Designs.Much More
2010CamaroRS is offline   Reply With Quote
Old 10-12-2010, 09:21 PM   #16
Sevn86


 
Sevn86's Avatar
 
Drives: 2010 Camaro 2LT/RS ABM
Join Date: Sep 2009
Location: Sugar Land, TX
Posts: 13,088
Looks great!
__________________
2LT, RS, AT6 ABM, Gray Leather
Quote:
Originally Posted by baclarsen View Post
Dude, you go through cars faster than I go through underware!!
1000 Initial Order 9/14/2009 - Classic Chevy Sugar Land
1100 Order accepted at dealer: 9/15/2009 - NPGV41.
2000 Order accepted by GM: 9/29/2009
3000 Accepted By Production Control: 9/30/2009 - TPW 10/26/09
3100 Sequenced:10/12/09
3300 Scheduled For Production:10/13/09
3400 Broadcast:10/22/09
3800 Produced:10/27/09
4000 Available To Ship:10/28/09
4200 Shipped:10/29/09
5000 Delivered To The Dealer:11/09/09
6000 Delivered To Customer:11/12/09
Sevn86 is offline   Reply With Quote
Old 10-13-2010, 07:41 AM   #17
ZombieEatsYou

 
ZombieEatsYou's Avatar
 
Drives: "Bmblbee" 2010 RY 2SS/RS. VIN 12043
Join Date: Oct 2008
Location: Waldorf, Maryland
Posts: 1,276
Quote:
Originally Posted by dragonZ28 View Post
We actually do those logos for free. So, no one will select "none"
If you can tell me what you want on it, I can sell it to you directly with the text you want.
We sell them plain with nothing on them at all.
http://www.emblempros.com/inc/sdetail/8869 $74.99

We sell them with whatever etching you want: "that we are allowed to do"
http://www.emblempros.com/inc/sdetail/8870 $84.99

You can get a bowtie with two lines of text on top, and two lines of text on the bottom, with the center empty for $98.00
This is an excellent deal, and you can do what you like with the empty location.

Please let me know. If the website does not allow what you want, I can make it for you anyway. We try to set the sale pages up for a lot of different options so that the customers can get what they want.
However, there are a lot of items we make every week, that are generated from one on one sales to customers.

Thanks, Roger
Roger, I'm ready to do this. What I'd like is one with the center empty and with two lines of text. How can I go about ordering it this way? Is there a comment box on the checkout page or something?
Neal
ZombieEatsYou is offline   Reply With Quote
Old 10-13-2010, 07:33 PM   #18
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
Quote:
Originally Posted by ZombieEatsYou View Post
Roger, I'm ready to do this. What I'd like is one with the center empty and with two lines of text. How can I go about ordering it this way? Is there a comment box on the checkout page or something?
Neal
Neal,

What you want will cost 86.99 plus the shipping.
Easy to do. The website will not allow you to pick no logo because it is included free in the price of the etched bowtie.
If you can send me an email to sales@emblempros.com
I can invoice you directly, and get you one for your car.

Thanks, Roger
__________________
dragonZ28 is offline   Reply With Quote
Old 10-14-2010, 08:56 AM   #19
ZombieEatsYou

 
ZombieEatsYou's Avatar
 
Drives: "Bmblbee" 2010 RY 2SS/RS. VIN 12043
Join Date: Oct 2008
Location: Waldorf, Maryland
Posts: 1,276
Quote:
Originally Posted by dragonZ28 View Post
Neal,

What you want will cost 86.99 plus the shipping.
Easy to do. The website will not allow you to pick no logo because it is included free in the price of the etched bowtie.
If you can send me an email to sales@emblempros.com
I can invoice you directly, and get you one for your car.

Thanks, Roger
Sent you an email, Roger. Have a question about doing a yellow border.
Neal
ZombieEatsYou is offline   Reply With Quote
Old 10-14-2010, 10:42 AM   #20
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
Quote:
Originally Posted by ZombieEatsYou View Post
Sent you an email, Roger. Have a question about doing a yellow border.
Neal
Neal,

I replied to your email.

Thanks, Roger
__________________
dragonZ28 is offline   Reply With Quote
Old 10-14-2010, 11:01 AM   #21
ZombieEatsYou

 
ZombieEatsYou's Avatar
 
Drives: "Bmblbee" 2010 RY 2SS/RS. VIN 12043
Join Date: Oct 2008
Location: Waldorf, Maryland
Posts: 1,276
Quote:
Originally Posted by dragonZ28 View Post
Neal,

I replied to your email.

Thanks, Roger
Ditto.
Neal
ZombieEatsYou is offline   Reply With Quote
Old 10-15-2010, 05:22 PM   #22
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
More installed pictures sent by one of our customers.
Thanks Alex!
This one is a brushed finish.











Looks nice! Thanks, Roger
__________________
dragonZ28 is offline   Reply With Quote
Old 10-15-2010, 05:24 PM   #23
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 123,978
wow, those are nice, maybe a future add on for me.
__________________
Jannetty Racing JRE Street Package
2010 SSRS is offline   Reply With Quote
Old 10-17-2010, 09:24 AM   #24
dragonZ28


 
Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06
Join Date: Apr 2009
Location: Lexington, KY
Posts: 1,952
We have updated the sale page for these bowties now. Added the border, and hidden bolts options etc...

Great pictures so far from everyone!!

Thanks, Roger
__________________
dragonZ28 is offline   Reply With Quote
Old 10-17-2010, 09:33 AM   #25
KATCMRO
 
Drives: 2010 2LT CGM
Join Date: Jun 2010
Location: Arizona
Posts: 289
Ordering mine soon. Love them!!
KATCMRO is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
g5cr cai system anybody install or looking at one "pics" camarossrs2150 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 41 07-14-2011 08:26 PM
Hot air Intakes -By Kenne bell ADM PERFORMANCE Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 66 02-08-2011 08:33 PM
NEW Showstopper Accessories Premium Underhood Bowties showstopper Exterior Parts & Accessories 0 08-23-2010 11:29 PM
Customized dash plaques - GM licensed pieces from emblempros.com dragonZ28 Interior Parts & Accessories 6 03-26-2010 11:45 AM
AirAid Cold Air Intake anyone? Flynnaz Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 12 01-01-2010 09:05 PM


All times are GMT -5. The time now is 06:20 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.