EMBLEMPROS.COM Underhood bowties GM licensed!! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dragonZ28 · 10-07-2010, 08:19 PM

We now have the bowties for under the hood on our website in three styles.
1) Plain http://www.emblempros.com/inc/sdetail/8869
2) Etched logos http://www.emblempros.com/inc/sdetail/8870
3) Etched logos. and emblems http://www.emblempros.com/inc/sdetail/8872

I will be populating this thread with some pictures, and more as we go along. Let starts with these:

Bowties are available in mirror, and brushed finishes. GM logos, and custom etching if desired.
The ones pictures above are the hidden fastener version. Not on the website yet, and for now there is a $20.00 additional cost for doing that.
Not available for sale yet. but will be next week. For now we only have the versions with the visible fasteners.

Thanks, Roger

tjd24 · 10-08-2010, 09:08 AM

Ordered - thanks Roger for all the work and patience in getting these to market. I went with:

2010 Camaro

2LT RS (silverframe, red fill on brushed bow tie)

#3434 4/15/09 (built/born date)

CamaroSSRSL99 · 10-08-2010, 10:05 AM

Do you have a picture of the brushed finish? How does the hidden fasteners work? Will you keep us posted when this is available? Thanks...awesome looking product.

dragonZ28 · 10-08-2010, 10:27 AM

Here is the link for the pictures,

http://www.emblempros.com/inc/sdetail/8872

1) Click on the more pictures link at the bottom of the mail picture.
More pictures will come up.
2) The mirror ones have the clouds and sky reflecting in them.
3) The brushed ones do not.

The brushed stainless finish is exactly like the finish on stainless kitchen appliances.

Thanks, Roger

unccescape · 10-08-2010, 12:49 PM

I am really curious on how these attach to the pad. I understand the bolts and you have to put holes in the pad but I love to see pictures or step by step instructions. Hidden fasteners sound really interesting as well.

Oh by the way, I love my Dash Plaque and I can wait to receive the Hydrocoated Fuse Box cover that was ordered last week! Great job on the innovative Camaro accessories!

dragonZ28 · 10-08-2010, 08:50 PM

I need to write the step by step installation instructions, with drawings tomorrow. I will include this in with each bowtie, and most likely send out as an email attachment as well.
The simple method is that:
1) Place the bowtie up to the hood insulation and make a mark on your hood liner where the bolt holes are.
2) Cut small slits, or "X's" at those locations.
3) Place the bolts through the bowtie, and the slits in the liner one at a time, and install the lock nuts, and washer we are providing you, on the back side.

It is important to note that the entire liner does not need to come off. This by only removing the four front plastic inserts on the liner. This will take about 10-15 minutes if you have all of the tools at hand. And in no way can these bolts touch your hood.

Thanks, Roger

CaniacFan · 10-08-2010, 09:52 PM

Ordered my custom underhood bowtie yesterday, can't wait to get my package in the mail.. Thankx Roger, you guys are great for the Camaro community. Love the products you continually offer..

Keep up the great work. Lori

ZombieEatsYou · 10-10-2010, 10:23 AM

Would it be possible to get a logo like this in lieu of the standard SS, RS, etc.?

dragonZ28 · 10-10-2010, 02:11 PM

Quote:

Originally Posted by ZombieEatsYou

Would it be possible to get a logo like this in lieu of the standard SS, RS, etc.?

We contacted Hasbro twice about some of these autobot head logos, and have not heard back. So, we cannot make autobot/decepticon logos until we talk to them.
If you can find a large enough decal, you could place one on there yourself.
We can just leave a spot empty for you.

Thanks, Roger

ZombieEatsYou · 10-10-2010, 03:14 PM

I guessed that'd be the case. What can you tell us about the plan to light these? Is the plan to light the outside border of the bowtie or from inside the center logos?
I'm just imagining what it would look like lit from the inside but I'm guessing your going to use LED fasteners.

dragonZ28 · 10-10-2010, 03:38 PM

Quote:

Originally Posted by ZombieEatsYou

I guessed that'd be the case. What can you tell us about the plan to light these? Is the plan to light the outside border of the bowtie or from inside the center logos?
I'm just imagining what it would look like lit from the inside but I'm guessing your going to use LED fasteners.

We absolutely know it can be done. We just need to sit down and do some design work to make it happen. We can try multiple methods to see what works best. Lighting these will add costs to them. The cost would depend on which method is chosen, and the extra time we need put into one, to make it lit.
When we were making the lighted door sills, we were not sure about costs on those either, until we settled on which way we were going to do it.
Our initial thoughts are that you guys may not want to pay what it will cost to do it.

Thanks, Roger

ZombieEatsYou · 10-10-2010, 08:13 PM

Guess it doesn't really matter if you can't do an autobot logo. How do I order one with no logo? Maybe you can add "none" to your drop down list?

dragonZ28 · 10-10-2010, 09:12 PM

Quote:

Originally Posted by ZombieEatsYou

Guess it doesn't really matter if you can't do an autobot logo. How do I order one with no logo? Maybe you can add "none" to your drop down list?

We actually do those logos for free. So, no one will select "none"
If you can tell me what you want on it, I can sell it to you directly with the text you want.
We sell them plain with nothing on them at all.
http://www.emblempros.com/inc/sdetail/8869 $74.99

We sell them with whatever etching you want: "that we are allowed to do"
http://www.emblempros.com/inc/sdetail/8870 $84.99

You can get a bowtie with two lines of text on top, and two lines of text on the bottom, with the center empty for $98.00
This is an excellent deal, and you can do what you like with the empty location.

Please let me know. If the website does not allow what you want, I can make it for you anyway. We try to set the sale pages up for a lot of different options so that the customers can get what they want.
However, there are a lot of items we make every week, that are generated from one on one sales to customers.

Thanks, Roger

dragonZ28 · 10-11-2010, 11:47 AM

Bowties on the table.

I am sure we will see some installed pictures of these from you guys, and gals later this week.

Making some more today. These look great. It was a long wait for approval, but worth it.

Thanks, Roger

2010CamaroRS · 10-12-2010, 08:55 PM

how do the hidden fasteners work?

Sevn86 · 10-12-2010, 09:21 PM

Looks great!

ZombieEatsYou · 10-13-2010, 07:41 AM

Quote:

Originally Posted by dragonZ28

We actually do those logos for free. So, no one will select "none"
If you can tell me what you want on it, I can sell it to you directly with the text you want.
We sell them plain with nothing on them at all.
http://www.emblempros.com/inc/sdetail/8869 $74.99

We sell them with whatever etching you want: "that we are allowed to do"
http://www.emblempros.com/inc/sdetail/8870 $84.99

You can get a bowtie with two lines of text on top, and two lines of text on the bottom, with the center empty for $98.00
This is an excellent deal, and you can do what you like with the empty location.

Please let me know. If the website does not allow what you want, I can make it for you anyway. We try to set the sale pages up for a lot of different options so that the customers can get what they want.
However, there are a lot of items we make every week, that are generated from one on one sales to customers.

Thanks, Roger

Roger, I'm ready to do this. What I'd like is one with the center empty and with two lines of text. How can I go about ordering it this way? Is there a comment box on the checkout page or something?
Neal

dragonZ28 · 10-13-2010, 07:33 PM

Quote:

Originally Posted by ZombieEatsYou

Roger, I'm ready to do this. What I'd like is one with the center empty and with two lines of text. How can I go about ordering it this way? Is there a comment box on the checkout page or something?
Neal

Neal,

What you want will cost 86.99 plus the shipping.
Easy to do. The website will not allow you to pick no logo because it is included free in the price of the etched bowtie.
If you can send me an email to sales@emblempros.com
I can invoice you directly, and get you one for your car.

Thanks, Roger

ZombieEatsYou · 10-14-2010, 08:56 AM

Quote:

Originally Posted by dragonZ28

Neal,

What you want will cost 86.99 plus the shipping.
Easy to do. The website will not allow you to pick no logo because it is included free in the price of the etched bowtie.
If you can send me an email to sales@emblempros.com
I can invoice you directly, and get you one for your car.

Thanks, Roger

Sent you an email, Roger. Have a question about doing a yellow border.
Neal

dragonZ28 · 10-14-2010, 10:42 AM

Quote:

Originally Posted by ZombieEatsYou

Sent you an email, Roger. Have a question about doing a yellow border.
Neal

Neal,

I replied to your email.

Thanks, Roger

ZombieEatsYou · 10-14-2010, 11:01 AM

Quote:

Originally Posted by dragonZ28

Neal,

I replied to your email.

Thanks, Roger

Ditto.
Neal

dragonZ28 · 10-15-2010, 05:22 PM

More installed pictures sent by one of our customers.
Thanks Alex!
This one is a brushed finish.

Looks nice! Thanks, Roger

2010 SSRS · 10-15-2010, 05:24 PM

wow, those are nice, maybe a future add on for me.

dragonZ28 · 10-17-2010, 09:24 AM

We have updated the sale page for these bowties now. Added the border, and hidden bolts options etc...

Great pictures so far from everyone!!

Thanks, Roger

KATCMRO · 10-17-2010, 09:33 AM

Ordering mine soon. Love them!!

10-07-2010, 08:19 PM	#1
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 1,892	EMBLEMPROS.COM Underhood bowties GM licensed!! We now have the bowties for under the hood on our website in three styles. 1) Plain http://www.emblempros.com/inc/sdetail/8869 2) Etched logos http://www.emblempros.com/inc/sdetail/8870 3) Etched logos. and emblems http://www.emblempros.com/inc/sdetail/8872 I will be populating this thread with some pictures, and more as we go along. Let starts with these: Bowties are available in mirror, and brushed finishes. GM logos, and custom etching if desired. The ones pictures above are the hidden fastener version. Not on the website yet, and for now there is a $20.00 additional cost for doing that. Not available for sale yet. but will be next week. For now we only have the versions with the visible fasteners. Thanks, Roger __________________ 2010 Camaro 2SS/RS Visit us on Facebook: http://www.facebook.com/#!/pages/Emb...90509954301410 Last edited by dragonZ28; 10-11-2010 at 07:13 PM.

10-08-2010, 09:08 AM	#2
tjd24 Thank you Oshawa/St.Cats! Drives: 2010 2LT RS 2G1FC1EV4A9103434 Join Date: May 2009 Location: NW NJ Posts: 3,441 View My Garage	Ordered - thanks Roger for all the work and patience in getting these to market. I went with: 2010 Camaro 2LT RS (silverframe, red fill on brushed bow tie) #3434 4/15/09 (built/born date) __________________ http://www.hubgarage.com/mygarage/tjd24 http://ny5thgen.com/TJD_RS.htm #3434 Born 4-15-2009, Delivered 5-22-2009 BBOMG 2/3/4 & booked for #5

10-08-2010, 10:27 AM	#4
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 1,892	Here is the link for the pictures, http://www.emblempros.com/inc/sdetail/8872 1) Click on the more pictures link at the bottom of the mail picture. More pictures will come up. 2) The mirror ones have the clouds and sky reflecting in them. 3) The brushed ones do not. The brushed stainless finish is exactly like the finish on stainless kitchen appliances. Thanks, Roger __________________ 2010 Camaro 2SS/RS Visit us on Facebook: http://www.facebook.com/#!/pages/Emb...90509954301410

10-08-2010, 12:49 PM	#5
unccescape Drives: Camaro 2LT/RS CGM, Ford Escape Join Date: May 2009 Location: Charlotte, NC Posts: 161	I am really curious on how these attach to the pad. I understand the bolts and you have to put holes in the pad but I love to see pictures or step by step instructions. Hidden fasteners sound really interesting as well. Oh by the way, I love my Dash Plaque and I can wait to receive the Hydrocoated Fuse Box cover that was ordered last week! Great job on the innovative Camaro accessories! __________________ Ordered 2LT/RS CGM - 2/20/10 1100, Preliminary order accepted - 2/22/10 2000, Order accepted by GM - 3/15/10 2500, Order preferenced - 3/16/10 3000, Order accepted by production control - 3/18/10 TPW 4/19/10 3300, Order scheduled for production - 4/7/10 3400, Order broadcast - 4/15/10 3800, Order produced - 4/20/10 #112,852 4000, Available to ship - 4/21/10 4200, Shipped - 4/22/10 5000, Delivered to the dealer - 5/6/10 6000, Delivered to the customer - 5/7/10 5th Gen Camaro's of the Carolinas

10-08-2010, 08:50 PM	#6
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 1,892	I need to write the step by step installation instructions, with drawings tomorrow. I will include this in with each bowtie, and most likely send out as an email attachment as well. The simple method is that: 1) Place the bowtie up to the hood insulation and make a mark on your hood liner where the bolt holes are. 2) Cut small slits, or "X's" at those locations. 3) Place the bolts through the bowtie, and the slits in the liner one at a time, and install the lock nuts, and washer we are providing you, on the back side. It is important to note that the entire liner does not need to come off. This by only removing the four front plastic inserts on the liner. This will take about 10-15 minutes if you have all of the tools at hand. And in no way can these bolts touch your hood. Thanks, Roger __________________ 2010 Camaro 2SS/RS Visit us on Facebook: http://www.facebook.com/#!/pages/Emb...90509954301410

10-08-2010, 10:05 AM	#3
CamaroSSRSL99 Heartbeat of America Drives: 2010 Camaro 2SSRS, 1967 Camaro Join Date: Jul 2010 Location: Wyoming Posts: 262	Do you have a picture of the brushed finish? How does the hidden fasteners work? Will you keep us posted when this is available? Thanks...awesome looking product. __________________

10-08-2010, 09:52 PM	#7
CaniacFan Drives: '10 2SS/RS CGM #75,288 Join Date: Aug 2009 Location: Wake Forest, NC Posts: 3,957	Ordered my custom underhood bowtie yesterday, can't wait to get my package in the mail.. Thankx Roger, you guys are great for the Camaro community. Love the products you continually offer.. Keep up the great work. Lori

10-10-2010, 10:23 AM	#8
ZombieEatsYou Drives: "Bmblbee" 2010 RY 2SS/RS. VIN 12043 Join Date: Oct 2008 Location: Waldorf, Maryland Posts: 1,338 View My Garage	Would it be possible to get a logo like this in lieu of the standard SS, RS, etc.? Attached Images

10-10-2010, 03:14 PM	#10
ZombieEatsYou Drives: "Bmblbee" 2010 RY 2SS/RS. VIN 12043 Join Date: Oct 2008 Location: Waldorf, Maryland Posts: 1,338 View My Garage	I guessed that'd be the case. What can you tell us about the plan to light these? Is the plan to light the outside border of the bowtie or from inside the center logos? I'm just imagining what it would look like lit from the inside but I'm guessing your going to use LED fasteners.

10-10-2010, 08:13 PM	#12
ZombieEatsYou Drives: "Bmblbee" 2010 RY 2SS/RS. VIN 12043 Join Date: Oct 2008 Location: Waldorf, Maryland Posts: 1,338 View My Garage	Guess it doesn't really matter if you can't do an autobot logo. How do I order one with no logo? Maybe you can add "none" to your drop down list?

10-11-2010, 11:47 AM	#14
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 1,892	Bowties on the table. I am sure we will see some installed pictures of these from you guys, and gals later this week. Making some more today. These look great. It was a long wait for approval, but worth it. Thanks, Roger __________________ 2010 Camaro 2SS/RS Visit us on Facebook: http://www.facebook.com/#!/pages/Emb...90509954301410 Last edited by dragonZ28; 10-11-2010 at 07:13 PM.

10-12-2010, 08:55 PM	#15
2010CamaroRS Driver of the Blue Demon Drives: '13 Jeep Wrangler 4WD Join Date: Jan 2010 Location: Westfield, MA Posts: 2,505 View My Garage	how do the hidden fasteners work? __________________ New England Camaro 5 The Few, The Proud, The Aqua Blue Metallics DT shorties.BBK Intake.FlowMaster AT.Eibach 1'' drop.Hurst Short Throw (44% reduction).Unrestricted Motorsports Gen 1 Style Rear Spoiler.Custom Aqua Blue Metallic Interior Panels.RS Embroidered Head Rests.Interior LED by Oracle.Illuminated Bowtie by Oracle.Footwell LED by Oracle.Grille LED by Oracle.Functional Headliner Console Toggle Switches for LED Lighting.Aqua Blue Engine Cover.RotoFab Radiator Cover.Aqua Blue Fuse Box Cover from RPI Designs.Much More

10-15-2010, 05:22 PM	#22
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 1,892	More installed pictures sent by one of our customers. Thanks Alex! This one is a brushed finish. Looks nice! Thanks, Roger __________________ 2010 Camaro 2SS/RS Visit us on Facebook: http://www.facebook.com/#!/pages/Emb...90509954301410

10-15-2010, 05:24 PM	#23
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 123,989 View My Garage	wow, those are nice, maybe a future add on for me. __________________ Jannetty Racing JRE Street Package

10-17-2010, 09:24 AM	#24
dragonZ28 Drives: 2001 T/A, 2010 2SS/RS, 2006 Z06 Join Date: Apr 2009 Location: Lexington, KY Posts: 1,892	We have updated the sale page for these bowties now. Added the border, and hidden bolts options etc... Great pictures so far from everyone!! Thanks, Roger __________________ 2010 Camaro 2SS/RS Visit us on Facebook: http://www.facebook.com/#!/pages/Emb...90509954301410

10-17-2010, 09:33 AM	#25
KATCMRO Drives: 2010 2LT CGM Join Date: Jun 2010 Location: Arizona Posts: 289	Ordering mine soon. Love them!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
g5cr cai system anybody install or looking at one "pics"	camarossrs2150	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	41	07-14-2011 08:26 PM
Hot air Intakes -By Kenne bell	ADM PERFORMANCE	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	66	02-08-2011 08:33 PM
NEW Showstopper Accessories Premium Underhood Bowties	showstopper	Exterior Parts & Accessories	0	08-23-2010 11:29 PM
Customized dash plaques - GM licensed pieces from emblempros.com	dragonZ28	Interior Parts & Accessories	6	03-26-2010 11:45 AM
AirAid Cold Air Intake anyone?	Flynnaz	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	12	01-01-2010 09:05 PM