Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Night Owl LED
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Member Car Journals

Member Car Journals Want to keep a long term Camaro project journal to share with the community? Use this forum to create a single thread which you can update over time to document the progress.

Reply
 
Thread Tools
Old 10-19-2010, 02:48 PM   #1
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
Arrow "SWEETNESS" make her appearance [COTW 12/27/10]

Well i have been doing a lot to the car and decided to put it all in one place, so here it goes. my wife and i paid off some bills earlier this year,
ahead of schedule, so then she comes up to me and says “you should get a camaro”, i said “dont be messing with me like that”, she said “really”.
I smiled, got in our car and went to the nearest dealership and i found the car i wanted. April 2010.
Well it didnt take long for me to start the mod’s, most are cosmetic, a few are performance.

SS2/RS with sunroof, 21 inch factory rims. Victory Red, LS3, 6 speed


links and months that i did my mods listed below, futhur down the thread, i also added picutre of all the mods i have done.

May

1st was my halo lights, i pulled off the front end, opened the headlight and installed dual halos. red and white
next came the led DRL’s
front footwell lighting


June
Carbon Fiber Graphix on misc interior pieces
see the work here
http://www.camaro5.com/forums/showthread.php?t=92795
pulled off vinyl strips on hood and truck, painted strips on, clear coated.
see the work here

http://www.camaro5.com/forums/showthread.php?t=90900
de-badge car
black out bowties and rear tail light bezels

July
Painted calipers and applied custom stickers
see work here

http://www.camaro5.com/forums/showthread.php?t=98523
installed night rider light in front grill

Aug
installed vertical doors
see work here
http://www.camaro5.com/forums/showthread.php?t=98531
installed ADM cold air intake with custom made scoop
see work here
http://www.camaro5.com/forums/showthread.php?t=98527
custom wireless indicator lights
see work here
http://www.camaro5.com/forums/showthread.php?t=99467
photo shoot
http://www.camaro5.com/forums/showthread.php?t=99081

Sept
installed headlight armor
see work here
http://www.camaro5.com/forums/showthread.php?t=106821

Oct
installed heritage grill
installed T3 Ports
installed custom port lighting
see all work here for grill, ports and lights

http://www.camaro5.com/forums/showthread.php?t=108652
installed Kooks L/T headers and high flow cats, corsa cat back system.
rear footwell lighting

see work here
http://www.camaro5.com/forums/showthread.php?t=110986
power port mod
see work here
http://www.camaro5.com/forums/showthread.php?t=109776
license plate mod
see work here
http://www.camaro5.com/forums/showthread.php?t=110082
afterburner mod
see work here
http://www.camaro5.com/forums/showthread.php?t=110991

installed Razzi GFX
see work here
http://www.camaro5.com/forums/showthread.php?t=111281

3rd seat belt mod on the rear seat
http://www.camaro5.com/forums/showthread.php?t=113158

Flashing Side Mirror Mod
http://www.camaro5.com/forums/showthread.php?t=113157

November 2010 mods

Light Door Sill mod
http://www.camaro5.com/forums/showthread.php?t=113769

light bowtie mod
http://www.camaro5.com/forums/showthread.php?t=115264

December Mods

side markers made to work as turn signals post #62
http://www.camaro5.com/forums/showpo...7&postcount=62

January 2011 Mods

inside lighted door handles see post 83
http://www.camaro5.com/forums/showthread.php?t=125507

March mods
Installed MPD1 Spoiler

Aug 2011
Installed Custom Fender Vents
http://www.camaro5.com/forums/showthread.php?t=164607

Nov 2011
custom painted my XM Antenna

http://www.camaro5.com/forums/showthread.php?t=183344

Dec 2011
Installed Revolution Styling Hood and Dj Phanton grill
http://www.camaro5.com/forums/showthread.php?t=189304

Sanded and painted my center console and other interior pieces
http://www.camaro5.com/forums/showthread.php?t=188100


Jan 2012
Modified OEM strut brace and custom painted
http://www.camaro5.com/forums/showthread.php?t=199431


Man i tired, but I love it.
future mods
Cam
Procharger

pictured below is the day my wife and i purchased “Sweetness” and then a few pics of “Sweetness” today



i will post more pics over the next few days of all the work.


thanks for looking

Lupe
Attached Images
          
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas

Last edited by overhaulengines; 02-20-2012 at 06:39 PM.
overhaulengines is offline   Reply With Quote
Old 10-19-2010, 02:48 PM   #2
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
ok this is May and June, dual halo install, carbon fiber graphix and painted strips and clear coat

ok 1st mod, Halo light install, this is where the mod addiction begins
Name:  IMG_0538.jpg
Views: 9584
Size:  407.9 KBName:  IMG_0541.jpg
Views: 9491
Size:  390.3 KB
Name:  IMG_0553.jpg
Views: 9403
Size:  337.4 KB
Name:  IMG_0562.jpg
Views: 9321
Size:  360.9 KB
Name:  IMG_0565.jpg
Views: 9217
Size:  274.0 KB
Name:  IMG_0568.jpg
Views: 9196
Size:  414.7 KBName:  DSC_0166.jpg
Views: 9113
Size:  147.3 KB


carbon fiber link
http://www.camaro5.com/forums/showthread.php?t=92795

Name:  100_1320.jpg
Views: 9081
Size:  232.9 KBName:  100_1328.jpg
Views: 9062
Size:  322.9 KBName:  100_1335.jpg
Views: 9000
Size:  336.7 KBName:  100_1340.jpg
Views: 8946
Size:  407.8 KBName:  100_1346.jpg
Views: 8961
Size:  372.3 KB

full strips and clear coat process
http://www.camaro5.com/forums/showthread.php?t=90900

ok now this was a major rush, sanding on my baby got my blood pressure going
Attached Images
            
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas

Last edited by overhaulengines; 10-21-2010 at 01:49 PM.
overhaulengines is offline   Reply With Quote
Old 10-19-2010, 02:49 PM   #3
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
future posts
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 10-19-2010, 03:02 PM   #4
thespymaster


 
thespymaster's Avatar
 
Drives: C7 / ZL1 / SS / trucsk
Join Date: Nov 2009
Location: G4 CLASSIFIED
Posts: 4,644
Very nice................
__________________
2014 C7 Stingray 3LT/Z51
2013 Camaro SS
2012 Camaro ZL1 - 850 HP
2015 GMC Denali 3500HD 4x4
2012 GMC Sierra 3500HD 4x4
thespymaster is offline   Reply With Quote
Old 10-21-2010, 12:08 AM   #5
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
Quote:
Originally Posted by thespymaster View Post
Very nice................
thx bro, ur car is amazine

update pics, will continue to add more

lupe
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 10-26-2010, 12:09 AM   #6
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
Calipers painted

hello, so here is July 2010, we pulled the tires and painted the calipers, i scuffed the calipers with some scotchbrite, then cleaned with thinner, painted and clearcoated. A few days later i put the decals on. 4 months later the decals are perfect. im posting a few pics here.
this link is the full process.
http://www.camaro5.com/forums/showthread.php?t=98523

lupe
Attached Images
          
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 10-26-2010, 01:09 PM   #7
sub zero

 
sub zero's Avatar
 
Drives: RED@2SS
Join Date: Aug 2010
Location: UAE
Posts: 1,380
good job man i like that..

but the sticker of camaro ss wich is u put in calipers , where can i get it? and don't u think that stecker will removed as using or whil u wash the car?
__________________
sub zero is offline   Reply With Quote
Old 10-26-2010, 01:15 PM   #8
ron10


 
Drives: 2010 2SS IOM L99
Join Date: Jan 2010
Location: LOUISVILLE,KY..
Posts: 7,375
very nice job.
ron10 is offline   Reply With Quote
Old 10-26-2010, 01:45 PM   #9
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
Quote:
Originally Posted by sub zero View Post
good job man i like that..

but the sticker of camaro ss wich is u put in calipers , where can i get it? and don't u think that stecker will removed as using or whil u wash the car?
hello, i purchased them off ebay, search chevy hi temp decals or caliper decals

i have had them on since July, i had the tires off just the other day and they are perfect. every time i was the car, i clean the calipers.

Lupe
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 10-27-2010, 11:23 AM   #10
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
Aug Mods

ok, so here is my August 2010 mods, my friend and i installed my vertical doors, ADM cold air intake with a custom hose inlet and some custom wireless indicator lights, hope all of you enjoy. Its been a fun ride for me. i will continue to update.

see more of the vertical door install here
http://www.camaro5.com/forums/showthread.php?t=98531

Name:  100_1679.jpg
Views: 8373
Size:  106.9 KB

Name:  100_1691.jpg
Views: 8304
Size:  102.2 KB

Name:  DSC_0176.jpg
Views: 8661
Size:  274.1 KB

Name:  100_1682.jpg
Views: 8274
Size:  78.4 KB

Name:  100_1668.jpg
Views: 8313
Size:  119.3 KB

Name:  100_1685.jpg
Views: 8276
Size:  107.7 KB

here is my ADM cold air intake
see install here
http://www.camaro5.com/forums/showthread.php?t=98527
Name:  100_1628.jpg
Views: 8282
Size:  107.0 KBName:  100_1632.jpg
Views: 8227
Size:  90.8 KBName:  100_1658.jpg
Views: 8218
Size:  117.5 KBName:  100_1666.jpg
Views: 8206
Size:  106.4 KBName:  100_1673.jpg
Views: 8206
Size:  86.5 KB

here is a light indicator mod i did to let me know what lights i have on.
http://www.camaro5.com/forums/showthread.php?t=99467

thanks for looking

Lupe
Attached Images
 
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 10-27-2010, 11:34 AM   #11
klatterblast

 
klatterblast's Avatar
 
Drives: 2010 camaro 2ssrs blk.
Join Date: Oct 2009
Location: walker la.
Posts: 1,700
awesome job
__________________
T-BONES BLACK 2SSRS TEAM L99

CAI w/ADM scoop,Magnacharged 3.8 pulley,L92 ported heads,ss valves,patriot springs,yella terra rockers,Comp cam,L99 to LS3 conv.ATI super damper,Taylor plug wires,NGK plugs,ARH 1 7/8 lt headers w/Borla stingers,Elite oil catch can,trans cooler,Jannetty built Richmond 4.11 rear end,Spohn trailing arms,front Racing Brake rotors,Hawk hps pads,BMR end links,AACstyle lighting. Thanks to Shane & crew for engine work at Thunder Racing & tuner Jeoff at EPS. 501rwhp-463rwtq ++
klatterblast is offline   Reply With Quote
Old 10-27-2010, 12:02 PM   #12
blackknight
Camaro Lover
 
Drives: 2014 GMC Sierra 5.3L
Join Date: Feb 2010
Location: Chicago 'Burbs
Posts: 710
Nice Car. Cool mods!
__________________
No Camaro right now. But I'll be back in one in a few years.
blackknight is offline   Reply With Quote
Old 10-27-2010, 06:47 PM   #13
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
Quote:
Originally Posted by klatterblast View Post
awesome job
Quote:
Originally Posted by blackknight View Post
Nice Car. Cool mods!
thanks, i will posting more tonight, all my mods in order.

lupe
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 10-30-2010, 07:02 AM   #14
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
installed headlight armor

hello friends, here it is Sept 2010, i decided to install the headlight armor, i had originally tinted my tail lights and they came out good, for a while, then they started to bubble a bit. so i installed the headlight armor kit. As of this day 10-30-10 its still looks perfect.
see all the work here
http://www.camaro5.com/forums/showthread.php?t=106821
Attached Images
     
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 10-30-2010, 11:00 AM   #15
RayJay
 
RayJay's Avatar
 
Drives: Your Wife's Benz ;)
Join Date: Jul 2010
Location: San Antonio, Texas
Posts: 66
Looks great!
RayJay is offline   Reply With Quote
Old 10-30-2010, 06:52 PM   #16
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
October Mods, this list is gonna get long

Ok, here is october, the list of mods gets long this month, i will be posting daily until fully updated.

heritage grill and T3 ports done the same day, then custom lighting in the ports to include white and red lighting.
see all the work here
http://www.camaro5.com/forums/showthread.php?t=108652
Attached Images
                  
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 10-31-2010, 12:22 AM   #17
Sevn86


 
Sevn86's Avatar
 
Drives: 2010 Camaro 2LT/RS ABM
Join Date: Sep 2009
Location: Sugar Land, TX
Posts: 13,088
looks great!
__________________
2LT, RS, AT6 ABM, Gray Leather
Quote:
Originally Posted by baclarsen View Post
Dude, you go through cars faster than I go through underware!!
1000 Initial Order 9/14/2009 - Classic Chevy Sugar Land
1100 Order accepted at dealer: 9/15/2009 - NPGV41.
2000 Order accepted by GM: 9/29/2009
3000 Accepted By Production Control: 9/30/2009 - TPW 10/26/09
3100 Sequenced:10/12/09
3300 Scheduled For Production:10/13/09
3400 Broadcast:10/22/09
3800 Produced:10/27/09
4000 Available To Ship:10/28/09
4200 Shipped:10/29/09
5000 Delivered To The Dealer:11/09/09
6000 Delivered To Customer:11/12/09
Sevn86 is offline   Reply With Quote
Old 11-02-2010, 05:31 PM   #18
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
october mods continued

here are few more mods i did in october

installed Kooks L/T headers and high flow cats, corsa cat back system.
Name:  IMG_1493.jpg
Views: 7811
Size:  126.0 KB
Name:  100_2894.jpg
Views: 7833
Size:  126.3 KB

rear footwell lighting, simple mod, connected to my front footwell lighting
see work here
http://www.camaro5.com/forums/showthread.php?t=110986

Name:  100_2985.jpg
Views: 7723
Size:  108.3 KB
Name:  100_2988.jpg
Views: 7733
Size:  59.0 KB


power port mod, i got tired having to put the key in the ignition to charge my phone.
see work here
http://www.camaro5.com/forums/showthread.php?t=109776
Name:  100_2741.jpg
Views: 7630
Size:  149.6 KB
Name:  100_2747.jpg
Views: 7593
Size:  70.8 KB
Name:  100_2748.jpg
Views: 7594
Size:  106.5 KB
Name:  100_2754.jpg
Views: 7579
Size:  121.4 KB
Name:  100_2756.jpg
Views: 7582
Size:  131.0 KB
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas

Last edited by overhaulengines; 11-08-2010 at 08:44 PM.
overhaulengines is offline   Reply With Quote
Old 11-08-2010, 09:18 PM   #19
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
October Mods continued again

license plate mod, here in Texas, we have to have a front plate, so i made a few brackets that would let me take off the plate for shows and reinstall quickly, 20 seconds
see work here
http://www.camaro5.com/forums/showthread.php?t=110082

Name:  1.jpg
Views: 7536
Size:  183.7 KB
Name:  100_2641.jpg
Views: 7514
Size:  111.8 KB
Name:  100_2642.jpg
Views: 7508
Size:  108.5 KB
Name:  100_2643.jpg
Views: 7505
Size:  120.2 KB
Name:  100_2651.jpg
Views: 7493
Size:  141.3 KB
Name:  100_2759.jpg
Views: 7485
Size:  171.0 KB
Name:  100_2760.jpg
Views: 7485
Size:  179.6 KB



afterburner mod
see work here
http://www.camaro5.com/forums/showthread.php?t=110991
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 11-08-2010, 09:22 PM   #20
aet08
 
Drives: c
Join Date: Feb 2010
Location: c
Posts: 629
nice mods
aet08 is offline   Reply With Quote
Old 11-09-2010, 03:55 PM   #21
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
more october mods

afterburner mod, cool little light mod i did when i was doing my ground effects.
see work here
http://www.camaro5.com/forums/showthread.php?t=110991
since taking these pics, i have made some baffles to stop the light from under the car, looks better i think, i will post some more current pics soon.
Name:  IMG_1644.jpg
Views: 7779
Size:  127.8 KBName:  IMG_1645.jpg
Views: 7413
Size:  131.3 KB
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 11-09-2010, 04:07 PM   #22
2010 SSRS



 
2010 SSRS's Avatar
 
Drives: 3 V8 Camaros
Join Date: May 2009
Location: The Ocean State
Posts: 123,973
looks awesome
__________________
Jannetty Racing JRE Street Package
2010 SSRS is offline   Reply With Quote
Old 11-10-2010, 08:20 PM   #23
overhaulengines

 
overhaulengines's Avatar
 
Drives: Red 2SS/RS M6
Join Date: Apr 2010
Location: San Antonio, Texas
Posts: 3,722
more october mods

installed Razzi GFX, Wow did the GFX make a difference, give the appearance that the car has been lowered. I think they really set the car off.

the last pic is my first car show, Got 3rd place
see work here
http://www.camaro5.com/forums/showthread.php?t=111281
Attached Images
                  
__________________
Custom painted Bowties, Tail light bezels, engine covers, strut braces, emblems and custom painted interior parts.
Installation of vertical doors, lighting, reverse hood kits, hex vents, ACS product etc.

Visit www.camarocustoms.com for all our products and services...like us on Facebook.....check out photo albums here for lots of pics and ideas
overhaulengines is offline   Reply With Quote
Old 11-13-2010, 08:51 AM   #24
ckaram

 
ckaram's Avatar
 
Drives: 2011 2SS RS, 1968 ragtop
Join Date: Apr 2009
Location: Indiana
Posts: 1,651
Fantastic job and beautiful car!
__________________
1968 Camaro convertible, LS1 & T56, Texas Speed 228R cam, 3.42 posi, 17" Torque Thrusts
2011 2SS/RS, LS3, M6, IOM in and out, factory Hurst short throw, GMPP axleback exhaust
ckaram is offline   Reply With Quote
Old 11-13-2010, 09:18 AM   #25
hotrodhoodrat
hotrodhoodratz
 
hotrodhoodrat's Avatar
 
Drives: 68' & 70' Pontiac's /2004 D. Dakota
Join Date: Oct 2010
Location: Idaho
Posts: 317
Wow Lupe, great work & mods !
+


The all new Convertible !, Welcome to the Fleet !
hotrodhoodrat is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
5th Gen Suspension -- The Book JusticePete Suspension / Brakes / Chassis 148 09-04-2013 03:28 PM
40 WAYS TO MAKE THE PIZZA GUY FEEL NERVOUS. shank0668 Off-topic Discussions 34 12-30-2011 09:42 PM
[COTW 8/2/10]: My 700+hp Addiction paul2010 Camaro Photos | Spyshots | Video | Media Gallery 56 08-31-2010 09:18 PM
Over 230 Satisfied 2010 Camaro Customers! Paddock Chevrolet has 40 in stock NOW camarojoe Dealer Camaros for Sale 2 05-24-2010 06:58 PM
"7 ways dealers make you pay extra" MajorTom Camaro Price | Ordering | Tracking | Dealers Discussions 37 06-10-2009 08:42 AM


All times are GMT -5. The time now is 01:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.