Nitrous Outlet Kit

[SRT10KLLR]

I have a Nitrous Outlet 2010 Camaro Specific Plate System. It comes with the following features:

# Black Nitrous Outlet 10lb bottle.
# Nitrous Outlet high flow 45 degree bottle valve with dual accessory ports.
# The ports are designed to work with pressure assisted systems like NANO.
# Quality bottom exit high flowing solenoids built to work with today’s fuels.
# The highest flowing, best atomizing and best fitting Nitrous Plate available!
# Custom designed solenoid mounts.
# Prefabricated Stainless Hard lines.
# Precise fitment fittings.
# CNC machined fuel feed with Prefabricated Hard line.
# Quick release stainless steel bottle brackets.
# Bolts on using all factory equipment. (Including cold air box)
# Neatly hides away under factory engine cover.
# TPS extension harness included.
# Jetting from 50-200 HP.
# Capable of supporting horse power levels up to 400 HP!
# E85 Compatible with different jetting.
# Made in the USA!

All this for just $650 plus shipping. I bought two of these and one I had installed in my brothers Camaro and the other was to be used by my cousin but he went with a Maggie.

Have pics of the one installed in my brothers Camaro.

[SRT10KLLR]

Come on spray that pig!

[Smart Line]

Pictures?

[SRT10KLLR]

Here is a picture from the website and one I just took a couple minutes ago of the kit in question.





You can find more pics and a vid of the kit I installed on my brothers Camaro here: http://www.camaro5.com/forums/showth...=103127&page=2

[SRT10KLLR]

All PM's replied to.

[Luckymex_dallas]

im interested its just a little high.. for another 350 that other guy will sell me a progressiver controller....hideaway swith panel...15 lb bottle..a big show purge....and a nano system....maybe if the price was around 500 id get it..still waiting on danhr to reply i want that stuff

[SRT10KLLR]

That is a very good price but mine is brand spanking new. I do have a used NANO 4500(#10 bottle) that we took off my brothers Camaro after two uses because he lives out of the country and there was no place to refill it. The only place that could get close was the fire department and they could only go up to 25-3000 psi so he may get the 3000psi NANO but I doubt it as he is going TT. The nitrous may stay but it will go down to 50 from a 200 shot.

Any ways, I can throw in the NANO for $1000 and you can get the other stuff. I have a progressive and purge kit but that is for my Silverado truck plus my purge is not the "Big Show" kit but rather the standard one.

[Luckymex_dallas]

i bit more interesting....i may have to settle because danrh is not responding. ugh give me a couple more days thats a good deal if you send me pictures of everything i may jumop right on it i have money in my savings ready to spend

[SRT10KLLR]

The picture of the nitrous kit is on post #4. Her is the picture of the NANO kit. This kit is new except for the bottle itself that was used on my brothers Camaro. So everything in this picture is new except the bottle.

[Luckymex_dallas]

srt10 killer where areyou located???

[SRT10KLLR]

Southern California(SoCal).

[J-Rod6410]

I'm interested in this kit but got a few questions. What is that harness for? Since these cars have no throttle cable/bracket, what's used for WOT detection? Don't you still need some type of pressure controller like bottle heater or nano system to maintain proper pressure? I checked their website, but it really only says what's included, not how it works. Any help would be greatly appreciated.

Thanks, jrrod.

[SRT10KLLR]

Originally Posted by jrrod6410

I'm interested in this kit but got a few questions. 1. What is that harness for? 2. Since these cars have no throttle cable/bracket, what's used for WOT detection? 3. Don't you still need some type of pressure controller like bottle heater or nano system to maintain proper pressure? I checked their website, but it really only says what's included, not how it works. Any help would be greatly appreciated.

Thanks, jrrod.

I will try my best to answer your questions.

1. The harness is simply a TPS(Throttle Position Sensor) wire extension harness. Its purpose is just to extend your existing harness because you need to flip(clock) the throttle body over so the connector will face the opposite side. Thus requiring the extension harness. You could just untape and unwind the original harness to make it reach but this makes it easier and more plug 'n play.

2. There is a micro switch included that attaches to the tb or gas pedal(Camaro) so that your nitrous activates while in WOT.

3. Nitrous should always be at its proper pressure so people use one of the following methods to accomplish this.

A. Bottle heater to heat the bottle and increase the pressure before each run
B. Switch bottles after a couple of runs or after every run(depends on outside temps, how much you spray and/or how big your bottle is)
C. NANO(pusher system) that pressurizes the nitrous bottle to keep constant/optimal pressure

You need to buy extra bottles, heater or NANO as they do not normally come with your nitrous kit but are sold separately as an option. Other options include bottle opener, gauge, purge, RPM window switch, progressive controller etc.

If you have any more questions you can PM me and I will answer them as best I can.

[SRT10KLLR]

Still for sale.

[LAYN2LOW]

how much for just the NANO and is it the 4500 or 3000 and does it come with the nos bottle valve?

[SRT10KLLR]

Originally Posted by LAYN2LOW

how much for just the NANO and is it the 4500 or 3000 and does it come with the nos bottle valve?

It is the Universal 4500 system so it does not include a valve. If you have a nitrous bottle it should have a valve already. I will take $400 for it.

If you don't have a nitrous bottle I do have a 10# bottle I bought from NANO that comes with their Sport nitrous bottle valve. I will take $150 for it.


FYI:
The Sport 4500 system comes with a NANO Sport nitrous bottle valve.
The Competition 4500 system comes with NANO’s Super Hi Flow modified valve and siphon tube.
The Universal 4500 system is designed to be used with your existing bottle and valve.

[Luckymex_dallas]

still for sale?