|02-08-2011, 05:12 PM||#1|
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Marietta, GA
V8 and V6 Shifters in stock for your 5th Gen
MTI Racing has partnered with manufacturing giant UUC Motorwerks to produce the ultimate shifter. The Six Shooter shifter addresses each and every "compromise" of the shifter system. The enhanced precision, direct feel, and super-smooth action cannot be duplicated by any means other than our precision shifter components.
The MTI Racing by UUC Six Shooter Shifter is engineered with better materials, shorter throw, and a better overall feel. Now you can get rid of that stock numb, rubbery factory shifter and replace it with the Six Shooter Shifter and confidently go through the gears with precision. The throw is reduced by approximately 25% and a HUGE improvement in feel. It feels like 1000% improvement.
The stock OEM shifter is made using a 4-pc shaft that is bushed with rubber, a pressed-on ball joint, and a welded-on pivot that holds a shaft bearing attached to rubber linkage bushings. The new MTI Racing Six Shooter Shifter is made of high quality stainless steel with a 1-pc ball machined directly into the lower stick, and a roller bearing at the base shift rod link. The kit also replaces the stock rubber bushings with durable delrin composite bushings, increasing the overall strength and life of the shifter assembly. The Six Shooter Shifter requires little to no extra effort when shifting, and instills confidence with its solid structural feel. Mission accomplished.
The MTI Racing Six Shooter shifter kit is not an entire shifter housing replacement. The kit includes all the components to convert the shifter assembly and its internal hardware with the highest quality components, while retaining the factory housing. Installation of the shifter requires the transmission to be lowered slightly to remove and install the shifter assembly. The new shifter is designed to use the stock shift knob or an aftermarket knob. The throw reduction is around 25%. We have tested over and over different throw reductions, and we felt that the final version provided the best overall confidence in shifting. Made in the USA.
The MTI Racing Six Shooter Shifter is available for the V8 and V6 5th Gen Camaro. Both shifters are identical in performance and build quality.
These shifter are $389
This is the #1 upgrade for the Camaro.
Pricing Thread Here
|Thread||Thread Starter||Forum||Replies||Last Post|
|Does the v6 have enough power?||cstproductions||Camaro V6 LLT Engine, Exhaust, and Bolt-Ons||305||08-29-2012 10:27 PM|
|stock fit classic shift knobs for v8 and v6 models in stock right now!!!!!||MGW||Transmission / Driveline||32||05-04-2011 09:53 PM|
|MGW SHIFT KNOB FOR STOCK V8 AND V6 SHIFTERS NOW READY>>>||MGW||V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)||15||12-22-2010 04:01 PM|
|Future 5th gen or 6th gen Camaro to get 440hp 5.5L V8 (from C7 Corvette)?||76z28||2016 Camaro: 6th Gen Camaro forum, news, rumors, discussions||90||07-05-2010 01:59 AM|