Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
B&M
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Member Car Journals

Member Car Journals Want to keep a long term Camaro project journal to share with the community? Use this forum to create a single thread which you can update over time to document the progress.

Reply
 
Thread Tools
Old 03-05-2011, 09:50 PM   #76
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Okay, time to come clean...

I had to mess with "2010 SS RS" - Larry, and was hoping to get a rise out of "mtcwby" - Don. Had to make it look real, so posted in a few places. Larry already picked up on it ..... I got to help install an RPM in his Larry's last weekend along with Brian from Laramie Chevrolet. I'm just not quite ready to loose my rear seat. But the thought of needing one is quite entertaining.

So here's the cost and options for the FNR Rollbar system (Fun Noodle Rollbar):

Purple, Yellow, Red, or Blue.... $15
Attached Images
  
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 03-06-2011, 06:48 AM   #77
speedster
SST...
 
speedster's Avatar
 
Drives: SST Camaro 2010
Join Date: Oct 2008
Location: East Coast of Florida
Posts: 6,057
Quote:
Originally Posted by Blue70SS View Post
Okay, time to come clean...

I had to mess with "2010 SS RS" - Larry, and was hoping to get a rise out of "mtcwby" - Don. Had to make it look real, so posted in a few places. Larry already picked up on it ..... I got to help install an RPM in his Larry's last weekend along with Brian from Laramie Chevrolet. I'm just not quite ready to loose my rear seat. But the thought of needing one is quite entertaining.

So here's the cost and options for the FNR Rollbar system (Fun Noodle Rollbar):

Purple, Yellow, Red, or Blue.... $15
Holy Cow - That thing is made out of "Floatie Noodles" ?

You had me fooled - Doh !
Looks just like the Firebird's first rollcage covered in blue instead of black.

That is f'n awesome !!!

Ha, ha - do you think it'd pass tech inspection... j/k.

Nice one. You need to drive around C5Fest2 with that thing in place and then pop out the sidebar when you are in the parking lot and staging lanes... You do know that it looks like the cage FastLane had in their car at the original C5Fest? Wish I had a pic. You'd laugh your a.. off.
__________________
speedster is offline   Reply With Quote
Old 03-07-2011, 10:53 PM   #78
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Drive shaft solution ordered - DSS Carbon Fiber DS!
Attached Images
 
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 03-09-2011, 10:43 PM   #79
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Elite Engineering Oil Catch Can Install Pics

Installed pictures....

1st 2 pics shows oil caught in 270 mile road trip at ~65-75 MPH on interstate. Measures about 1 teaspoon.

I enlarged the mounting hole, plus used a different bolt and washer below the modified Elite bracket to get over the hump on the old air filter box mounting bracket. The stainless nut has a large locking flange base on it.... had a bag of them from my PV Solar System Array install that I special ordered from Fastenal.

Last pic is 210 miles in town driving - didn't measure yet, but looks like a little more. I will be interesting to compare results with another member on trip to Cfest, dragstrip festivities, and Pfadt Track Attack session The other member is running a different unit on a stroked Eforce supercharged engine, but is using breather cap that requires a tune - due to using unmetered filtered air. I like my polished one that doesn't mess with our tunes!
Attached Images
           
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 03-09-2011, 11:41 PM   #80
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Still my favorite Pic

Now this was fun!!!!! ... had to let up (seemed pointless to go further... just kept spinning )
Attached Images
 
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-03-2011, 03:28 PM   #81
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
New Weld Racing rims installed.....

A few adjustment for clearances, but all good now!
Attached Images
      
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-03-2011, 07:00 PM   #82
speedster
SST...
 
speedster's Avatar
 
Drives: SST Camaro 2010
Join Date: Oct 2008
Location: East Coast of Florida
Posts: 6,057
Wow

Those look really great on there. Still has the stance and all. Very nice. Those M&H's should give you some good bite at the track.
__________________
speedster is offline   Reply With Quote
Old 04-05-2011, 07:13 PM   #83
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Quote:
Originally Posted by speedster View Post
Wow

Those look really great on there. Still has the stance and all. Very nice. Those M&H's should give you some good bite at the track.
I'm hoping so..... hopefully I'll get to try them out this Saturday.

See ya at the fest!
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-05-2011, 07:33 PM   #84
600hp-lpe


 
600hp-lpe's Avatar
 
Drives: 2010 2SS RS RJT MN6
Join Date: Jul 2009
Location: NH
Posts: 4,701
Quote:
Originally Posted by Blue70SS View Post
I'm hoping so..... hopefully I'll get to try them out this Saturday.

See ya at the fest!

You got it!!
__________________
2010 2SS/RS RJT 6SP
600 HP Lingenfelter package 526 RWHP 491 RWTRQ
Pedders Justice package with Z-bar and supercar coilovers
LPE ZR-1 twin disc Clutch, LPE rear w/3.73 gears
NHRA cert. 8.50 CM 10 point roll cage, Cobra racing Seats
Gforce 5 PT. Harnesses, MOMO steering wheel and pedals
285/35/19 Bridgestone RE-11 Tires, CCW 19X10 SP16A Wheels
315/30/18 Front, 335/30/18 Rear Hoosier tires, CCW C2K Wheels
Racing Brake Rotors, stainless lines, MT800 Brake pads
HD Rear Axles, Toe Links, Trailing Arms, Lower Control Arms
Beware of the LPE Brotherhood
600hp-lpe is offline   Reply With Quote
Old 09-28-2011, 01:32 AM   #85
Orange Krate
Not just any car!
 
Orange Krate's Avatar
 
Drives: Orange Krate DOB - 11/22/2010
Join Date: Oct 2009
Location: Simi Valley, CA
Posts: 1,832
Great build Blue! That is a sweet Orange Ling!
__________________

Simi Valley, CA
email: orangekrate2011@yahoo.com
Orange Krate is offline   Reply With Quote
Old 09-28-2011, 09:29 PM   #86
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Quote:
Originally Posted by Orange Krate View Post
Great build Blue! That is a sweet Orange Ling!
Thanks,

Next up is ARH LT headers with 2" primarys, 3" exhaust, Lingenfelter 9.5" rear diff, new CVs, and 1st DSS Carbon Fiber drive shaft for the LPE diff.
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 11-05-2011, 11:38 AM   #87
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
FYI info to share: 12.9 Hardness Rear Diff mounting bolts with same size neck

Quote:
Originally Posted by hypurone
I recently read a thread concerning rear gear noises in which you posted that the diff mounting bolts were replaced with some ones (12.9 hardness) that were smooth bore the entire length eliminating the slop of the "necked down" OE ones.

Can you provide me with the info on where they were purchased/part numbers etc?

Would really appreciate it.
I purchased them at Ace Hardware for somewhere around $7 each I think. I don't have any part #s - but if you can't locate the bolt, I can stop by and get it off the bin. (I will try to get for everybody else's benefit and change post....) Then maybe they could be ordered on their website? They recently expanded the hardware section to about double. They may have had these already... most of expansion was polished stainless bolts, chrome and black chrome, etc. I tried to get actual Flange bolts shown in the picture of the box, but they didn't stock the length needed. Next to the box is the Allen head black 12.9 bolt with 90mm length (black 12.9 is the same type used in the high end CV shafts). They had 80mm lengths also, but would be too short for the rear bushing. Stock bolts are 85mm. Since I couldn't find a long enough flange bolts, I added a 10.9 hardeness washer on the bolt side to distribute the pressure like the flange bolt. I ended up using the OEM crimp style nuts instead of adding lock washers. The crimp style works great and can't hurt a 12.9 bolt, since they're 10.9 hardness.

Black 12.9 hardness Allen Head Bolt specs are: Metric M12 diameter, standard 1.75 pitch, 90 mm length.

Nice looking wheels for your color scheme BTW!
Attached Images
    
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 11-16-2011, 11:25 PM   #88
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Lingenfelter 9.5" installed with Ceramic ARH 2" LT primarys and 3" mids

So here's a bunch of pics for reference showing clearances of exhaust around the Lingenfelter 241mm (9.5") rear differential.
First 3 are before mods from Sterling, Colorado car summer show. I did modify the exhaust slighty on the passenger side, just as it passes the diff cover. Torched and hammered in slightly, plus used longer GM exhaust hangers. The part # is 15092802 and is used on many Chevy trucks and SUVs. The ARH mids are 3" and the Corsa axle back is 2 1/2".
Attached Images
                          
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 11-17-2011, 12:12 AM   #89
jasycz28
I don't understand
 
jasycz28's Avatar
 
Drives: 2010 Camaro SS
Join Date: Nov 2010
Location: Germany
Posts: 734
How did you get the Welds to fit with the coil overs? Did you have to raise the car up in the rear?
__________________
"J.Sick"
2010 Camaro 2SS
jasycz28 is offline   Reply With Quote
Old 11-17-2011, 01:02 AM   #90
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Quote:
Originally Posted by jasycz28 View Post
How did you get the Welds to fit with the coil overs? Did you have to raise the car up in the rear?
Heated up the contact point on lower control arms with MAPP gas and pounded the #@!T out of them until it cleared, plus Coilovers as high as possible in the rear. Repainted control arm area with Black rustoleum. I tested it out with "tape tateltale" strips on 4 places of the wheel edge at Bandimere Speedway.... finally was able to launch sucessfully on M&H drag radial 325's with 15 PSI, Pfadt coilovers adjusted to zero on fronts, and 5 on the rears. Plus opened up the oval holes on the bottom of the control arms to make coilover adjustments easier and half moon grinds on top side of OEM gussets. I'll have to dig up some pictures and post up.
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 11-17-2011, 07:04 AM   #91
55Designs

 
Drives: 2010
Join Date: Sep 2009
Location: Westchester NY
Posts: 991
Hey Blue70SS thanks for posting these photos up. Do you know by chance if the LPE diff is the same size in terms of height vs the OEM? Do you know if the LPE diff has room above it if you were to raise it 1/2 to 3/4? I am thinking if the diff went up with solid offset bushings it may eliminate the exhaust clearance issues. Report back for us here if you can stick your hand on top of the diff while its mounted in the cradle.
55Designs is offline   Reply With Quote
Old 11-17-2011, 07:45 PM   #92
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Quote:
Originally Posted by 55Designs View Post
Hey Blue70SS thanks for posting these photos up. Do you know by chance if the LPE diff is the same size in terms of height vs the OEM? Do you know if the LPE diff has room above it if you were to raise it 1/2 to 3/4? I am thinking if the diff went up with solid offset bushings it may eliminate the exhaust clearance issues. Report back for us here if you can stick your hand on top of the diff while its mounted in the cradle.
There is room above it to fit my fingers, but the case just above the 2 front bushings would definitely hit the rear cradle. Also FYI, I was just told you wouldn't want to raise the diff, as it would change the pinion angle.
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 11-18-2011, 07:52 AM   #93
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
BMR Driveshaft Loop Modification by Brian at Laramie GMAC:

We extended the plate 5 1/2" inches, then added a 2" by 8" welded plate on the back for extra strength. Extending the plate 6" would be better for those without the Pfadt engine mounts - otherwise the loop might be able to touch the rear portion of the shifter mount. (because the Pfadt mounts won't flex as much as the OEM engine mounts) The goal was obviously to make it legal, but also keep it covering the insertion area of the billet end piece of the Carbon Fiber driveshaft. EDIT, either way - extending it 6" is the best for everyone with the drive shafts that utilize the front CV.

This mod is needed for any of the 1-piece driveshafts, since the front CV joint pushes the shaft further back in the tunnel.
Attached Images
     
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.

Last edited by Blue70SS; 01-14-2013 at 10:24 PM.
Blue70SS is offline   Reply With Quote
Old 11-18-2011, 08:53 AM   #94
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Quote:
Originally Posted by 55Designs View Post
Hey Blue70SS thanks for posting these photos up. Do you know by chance if the LPE diff is the same size in terms of height vs the OEM? Do you know if the LPE diff has room above it if you were to raise it 1/2 to 3/4? I am thinking if the diff went up with solid offset bushings it may eliminate the exhaust clearance issues. Report back for us here if you can stick your hand on top of the diff while its mounted in the cradle.
Also, just noticed if the diff was raised you could also run into clearance problems with the inside CVs and the cradle.
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 12-01-2011, 03:52 PM   #95
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
GT9 Cam installed.....



Love the cam! Can't really get on it yet till tuned for it though. Here's a phone video clip..... sounds louder than it really is. I installed Corsa "Touring" exhaust to tone it down a bit. Sound is perfect now and really opens up on WOT. Corsa doesn't promote the Touring edition and won't sell it to you unless you specify how loud your getting with your particulair build - you have to tell them about LT headers/supercharger/high flow or no cats. You won't find part #s listed on any websites. (actually found 1, but Corsa made them remove it). Already sold the previous Corsa system and rear end.
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 12-01-2011, 07:24 PM   #96
aquablueL99
Jackson's COTW
 
aquablueL99's Avatar
 
Drives: 1968 Camaro & 2010 Camaro 2SS
Join Date: Jul 2009
Location: Chalmers, Indiana
Posts: 1,528
What a sweet Ride!

Quote:
Originally Posted by Blue70SS View Post
Motorsport Concepts for stripes, splitter, and spoiler paint!

Finished of by a little
Blue70SS, Nice build and presentation..You outdid yourself....I love the personal touches...Congrats..
__________________
aquablueL99 is offline   Reply With Quote
Old 12-01-2011, 10:10 PM   #97
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Quote:
Originally Posted by aquablueL99 View Post
Blue70SS, Nice build and presentation..You outdid yourself....I love the personal touches...Congrats..
Thanks, Looks like your build is doing well! Nice rare color too
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 12-02-2011, 11:22 PM   #98
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,024
Lingenfelter ZR1 to GT9 Cam swap

- Dyno sheets show 2.95" pully, but both were 2.75"

- Notice how the Peak Torque curve was really extended

- Peak boost only dropped .11 lbs at 6035 elevation
Attached Images
  
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 12-02-2011, 11:36 PM   #99
SSE 4 2SS
Boosted Moderator
 
SSE 4 2SS's Avatar
 
Drives: LS-3 429 TT with other odds-n-ends
Join Date: Sep 2009
Location: Kyle Tx
Posts: 13,449
Send a message via AIM to SSE 4 2SS Send a message via Yahoo to SSE 4 2SS
G,

I'm really liking the things you've done to this car... Look forward to seeing you again at the next Fest...

Looked, but didin't see this pic so I hope you don't mind me posting it here... L-R

Blue70SS, MTCWBY, SSE 4 2SS, Mercuryman, Speedster, Woody55
Attached Images
 
__________________
SSE 4 2SS is offline   Reply With Quote
Old 12-02-2011, 11:37 PM   #100
Merc
COTW 12/5/11
 
Merc's Avatar
 
Drives: 2010 Camaro 2SSRS IOM
Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 8,401


__________________
Merc is offline   Reply With Quote
 
Reply

Tags
650, blue70ss, ccotr, lingenfelter, lpe

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Speedster's SST Camaro Build Thread [COTW 9/13/10] speedster Member Car Journals 5756 06-21-2014 04:16 PM
Firefighter1 Build Thread [COTW 11/8/10] firefighter1 Member Car Journals 95 02-12-2013 08:00 PM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp! Sizzox 5th Gen Camaro SS LS LT General Discussions 108 04-14-2010 07:09 PM
Lingenfelter 650 hp build mws444 Forced Induction - V8 546 12-26-2009 11:23 AM
My Lingenfelter Camaro Build Speed74SS Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 244 10-08-2009 10:00 PM


All times are GMT -5. The time now is 05:57 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.