Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
JUICEDMOTORSPORTS
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum


Reply
 
Thread Tools
Old 01-10-2011, 02:58 PM   #15
Hendrix-Engineering
Account Suspended
 
Drives: First 9 inch-12 bolt IRS Camaro
Join Date: Jun 2009
Location: nc
Posts: 1,838
awesome

if its not to late please seal those mdf adapters,they will deteriate in that back glass with the heat,alot of work im sure you dont want to do again anytime soon lol...should sound great!
Hendrix-Engineering is offline   Reply With Quote
Old 01-11-2011, 12:13 AM   #16
SNV

 
SNV's Avatar
 
Drives: 2014 RRM 2ls
Join Date: Jul 2009
Location: NJ
Posts: 1,299
Great write up . Now I know what I will be getting into once it warms up some.
SNV is offline   Reply With Quote
Old 04-01-2011, 06:28 PM   #17
Docknock
 
Docknock's Avatar
 
Drives: 1SS/1LE
Join Date: Nov 2009
Location: Millington, TN
Posts: 240
I can't get past taking out the top part of the backseat!!! Help please
Docknock is offline   Reply With Quote
Old 04-01-2011, 06:33 PM   #18
2010SLVRBULIT


 
2010SLVRBULIT's Avatar
 
Drives: G5(LLT) & C6(LS3)
Join Date: Apr 2009
Location: MARS
Posts: 7,448
nice, what a PITA just to replace them..:(
2010SLVRBULIT is offline   Reply With Quote
Old 04-01-2011, 08:56 PM   #19
Docknock
 
Docknock's Avatar
 
Drives: 1SS/1LE
Join Date: Nov 2009
Location: Millington, TN
Posts: 240
Quote:
Originally Posted by 2010SLVRBULIT View Post
nice, what a PITA just to replace them..:(
I have done a few installs but this is the hardest of any of them!! WTF
Docknock is offline   Reply With Quote
Old 04-01-2011, 09:39 PM   #20
calbert1999
Camaro SS Lover
 
calbert1999's Avatar
 
Drives: 2010 Camaro 2SS/RS Black IOM
Join Date: Jun 2010
Location: Toronto, Ontario (Canada)
Posts: 2,863
Really cool. But, I wouldn't do that myself. No way.
__________________
2010 Camaro SS, P1SC SuperCharged Livernois LSX429ci., 1 7/8" LT Headers, full 3" MBRP exhaust, SPI built/tuned, a total
calbert1999 is offline   Reply With Quote
Old 04-02-2011, 12:24 AM   #21
Blk_SS
 
Drives: black on black 2SS/RS
Join Date: Feb 2010
Location: Biloxi,MS
Posts: 357
omg.... i never knew that changing out the rear speaker take that much work.....
Blk_SS is offline   Reply With Quote
Old 04-02-2011, 04:39 AM   #22
gill7784
 
Drives: 2010 Camaro 2LT/RS
Join Date: Sep 2010
Location: San Diego, CA
Posts: 213
Honestly, it looks like a lot of work but it isn't really THAT bad. I've had my rear deck out several times over the last couple months and I can have it out in 20 minutes and back together in another 30. If you want new speakers, and don't want some bone-head at Best Buy to thrash your car, go for it. Its a fun project.
__________________


The only good Mustang is one who was prior enlisted.
gill7784 is offline   Reply With Quote
Old 04-02-2011, 04:42 AM   #23
gill7784
 
Drives: 2010 Camaro 2LT/RS
Join Date: Sep 2010
Location: San Diego, CA
Posts: 213
Quote:
Originally Posted by Docknock View Post
I can't get past taking out the top part of the backseat!!! Help please
Pull the seat forward and look to the left and right of the base on the backside. You will see the pivot point and where the small arms rest in the carriers. As you hold the seat forward at a 45 degree angle, reach down there and push the mouth of one side open. Rotate the arm out of the carrier. While continuing to hold the seat, move over to the other side and repeat.

The trick is that the arms are notched to only come out of the carrier if the seat is rotated 45 degrees to the front.

Good luck!
__________________


The only good Mustang is one who was prior enlisted.
gill7784 is offline   Reply With Quote
Old 04-02-2011, 09:25 AM   #24
Docknock
 
Docknock's Avatar
 
Drives: 1SS/1LE
Join Date: Nov 2009
Location: Millington, TN
Posts: 240
Quote:
Originally Posted by gill7784 View Post
Pull the seat forward and look to the left and right of the base on the backside. You will see the pivot point and where the small arms rest in the carriers. As you hold the seat forward at a 45 degree angle, reach down there and push the mouth of one side open. Rotate the arm out of the carrier. While continuing to hold the seat, move over to the other side and repeat.

The trick is that the arms are notched to only come out of the carrier if the seat is rotated 45 degrees to the front.

Good luck!

I finished it last night! Removing that part was the hardest because the rubber piece was sliding and covering the exit point.
Docknock is offline   Reply With Quote
Old 04-04-2011, 10:16 PM   #25
Edscapade
Edscapade
 
Edscapade's Avatar
 
Drives: 2011 SS Camaro
Join Date: Jul 2010
Location: Pocatello Idaho
Posts: 442
Thanks for the write up and pictures.
Edscapade is offline   Reply With Quote
Old 04-08-2011, 05:19 PM   #26
=Stephens=


 
=Stephens='s Avatar
 
Drives: 2011 LS
Join Date: Feb 2011
Location: Kearney, Nebraska
Posts: 3,491
Thanks for your write up, it made it easy to install. I had my laptop in my garage and kept going back to reference this post. It took me 2 1/2 hours from start to finish to do. The hardest part for me was taking out the screw on the back side panel.

Awesome write up!!!!
__________________
=Stephens= is offline   Reply With Quote
Old 04-09-2011, 07:55 PM   #27
dillypo
 
Drives: Camaro 1lt
Join Date: Dec 2010
Location: TX
Posts: 24
Was anyone else able to do this without completely removing the backseats?

I did mine about a month ago and thought I'd see how far I could get without removing the back seats. I managed to finish the entire job no problem.

If you're very careful you can get the drivers side panel completely off and the passengers side loose enough to life the deck cover off and rotate towards the drivers side and out of the car. You just have to be careful not to scratch the plastic.
dillypo is offline   Reply With Quote
Old 04-10-2011, 11:16 AM   #28
=Stephens=


 
=Stephens='s Avatar
 
Drives: 2011 LS
Join Date: Feb 2011
Location: Kearney, Nebraska
Posts: 3,491
I did mine exactly to this post. It saved me a lot of time. And now that I have taken it all apart, I know how and where I am going to mount my rear LED lights and rear footwell lights.
__________________
=Stephens= is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY : Install headers on 2010 Camaro SS Nine Ball Camaro DIY & HOW-TO instructions & discussions 63 08-22-2016 09:03 PM
My JL 12" and JL 250 amp install VIDEO AND PIX! TAG UR IT Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum 55 02-12-2011 01:03 AM
Please help with speaker install!! camaro10rs Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum 0 03-13-2010 12:32 AM
DIY : Install catback on 2010 Camaro SS Nine Ball Camaro DIY & HOW-TO instructions & discussions 3 08-09-2009 04:36 PM


All times are GMT -5. The time now is 02:51 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.