Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Vitesse Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V6


Reply
 
Thread Tools
Old 07-13-2011, 10:59 AM   #18
bmorecam
Account Suspended
 
Drives: jealous vendors mad!! HAHA!!
Join Date: Jan 2011
Location: CYBERGMONSTER@GMAIL.COM
Posts: 3,658
Me and vince over at trifecta basically worked on the same principal with e85 as you would with methanol.. they are both fuel with higher octane level. The main benefit would be to kill detonation or prevent it all together. If you was to do something like this than I would say to go with e85 as it can be alot more efficient if your local area has it at the pump. The benefit on our n/a v6 camaro with stock internal is around 7.5% to the rear wheels at peak over gasoline and this is after maxing out MBT and even tuning out VVT cam phasing to take complete advantage of e85's high octane, but the greater benefit is full torque@3k rpm and off peak power/torque which is alot higher. We worked out some more bugs since my last dyno so I think we should be able to see a little more power/torque on my next dyno session.

Where meth/e85 really shine is with turbo induced enignes. Ask those turbo guys running e85/meth if they will ever go back to gas and they will probably laugh at you lol. The gain is tremendous.
bmorecam is offline   Reply With Quote
Old 07-13-2011, 11:15 AM   #19
TiE2000
 
TiE2000's Avatar
 
Drives: Cobalt SS/SC
Join Date: Jun 2009
Location: Denver CO
Posts: 260
Quote:
Originally Posted by bmorecam View Post
Me and vince over at trifecta basically worked on the same principal with e85 as you would with methanol.. they are both fuel with higher octane level. The main benefit would be to kill detonation or prevent it all together. If you was to do something like this than I would say to go with e85 as it can be alot more efficient if your local area has it at the pump. The benefit on our n/a v6 camaro with stock internal is around 7.5% to the rear wheels at peak over gasoline and this is after maxing out MBT and even tuning out VVT cam phasing to take complete advantage of e85's high octane, but the greater benefit is full torque@3k rpm and off peak power/torque which is alot higher. We worked out some more bugs since my last dyno so I think we should be able to see a little more power/torque on my next dyno session.

Where meth/e85 really shine is with turbo induced enignes. Ask those turbo guys running e85/meth if they will ever go back to gas and they will probably laugh at you lol. The gain is tremendous.
1st, I'm loving this thread and it's been subscribed!
2nd, A little off topic as I don't own a Camaro, but I have an 06 SS/SC Cobalt, tuned by Vince at Trifecta. I just purchased a Methanol kit and i'm planning on installing next weekend when my new Header and Downpipe arrive from ZZP. Now my question is directed this:

Quote:
Originally Posted by bmorecam View Post
Where meth/e85 really shine is with turbo induced enignes. Ask those turbo guys running e85/meth if they will ever go back to gas and they will probably laugh at you lol. The gain is tremendous.
I was under the impression that you could not run both e85 and meth together, so I only purchased 60# injectors for my LSJ (supercharged 4banger) as apposed to 80# wich are required to run e85 on my motor. Now, before I go ahead an sell my 60's and get 80's what are the draw backs for running a e85/meth combo if any. My Car is my DD so reliability is a must for me.
TiE2000 is offline   Reply With Quote
Old 07-13-2011, 06:04 PM   #20
mpiper
 
mpiper's Avatar
 
Drives: 2011 Black 1LT RS
Join Date: May 2010
Location: Texas
Posts: 496
Quote:
Originally Posted by bmorecam View Post
Me and vince over at trifecta basically worked on the same principal with e85 as you would with methanol.. they are both fuel with higher octane level. The main benefit would be to kill detonation or prevent it all together. If you was to do something like this than I would say to go with e85 as it can be alot more efficient if your local area has it at the pump. The benefit on our n/a v6 camaro with stock internal is around 7.5% to the rear wheels at peak over gasoline and this is after maxing out MBT and even tuning out VVT cam phasing to take complete advantage of e85's high octane, but the greater benefit is full torque@3k rpm and off peak power/torque which is alot higher. We worked out some more bugs since my last dyno so I think we should be able to see a little more power/torque on my next dyno session.

Where meth/e85 really shine is with turbo induced enignes. Ask those turbo guys running e85/meth if they will ever go back to gas and they will probably laugh at you lol. The gain is tremendous.
Not enough E85 stations close to me, and with this being a DD and rush hour traffic putting me at 15 MPG already, I don't want to drop down even more.

But I have been following your thread closely and it was part of why this hairbrained scheme popped into my head the other day. I'm hoping to see some of your benefits, but still staying on readily available gas. If E85 ever becomes readily available around my house, I may really crunch the numbers to see how the lower cost per gallon versus the lower gas mileage works out and see if it's worth it.

What is your current MPG with this latest tune? (When your not testing the acceleration.)

Quote:
Originally Posted by TiE2000 View Post
1st, I'm loving this thread and it's been subscribed!
2nd, A little off topic as I don't own a Camaro, but I have an 06 SS/SC Cobalt, tuned by Vince at Trifecta. I just purchased a Methanol kit and i'm planning on installing next weekend when my new Header and Downpipe arrive from ZZP. Now my question is directed this:



I was under the impression that you could not run both e85 and meth together, so I only purchased 60# injectors for my LSJ (supercharged 4banger) as apposed to 80# wich are required to run e85 on my motor. Now, before I go ahead an sell my 60's and get 80's what are the draw backs for running a e85/meth combo if any. My Car is my DD so reliability is a must for me.
I'm a newbie on this, but since the Meth/water solution would be injected separately, wouldn't the 60# still be fine? Methanol is a fuel, so it doesn't need more gas, and the extra air from the cooled intake temp wouldn't be that drastic. My guess is that unless the 60# are just barely adequate now, simply adding a meth/water injection system wouldn't force you to change them out. But that's just my guess, coming from a armchair QB, not an experienced engine builder. I'd trust SC2150 over me on this any day.
__________________
Midnight => 2011 1LT/RS, A6, Roto-Fab CAI & W/W Relocate, MPD Hood, 25%/18% Carbon Tint
See my build journal here.
mpiper is offline   Reply With Quote
Old 07-13-2011, 06:45 PM   #21
jeff4946
 
jeff4946's Avatar
 
Drives: 2010 RS 2LT
Join Date: Jan 2011
Location: slc, utah
Posts: 623
I'm pretty sure zex makes a universal safe shot kit that adds about 35hp... That would be more econmical and a lot easier to set up. Why would you not go that route if your looking for just a smaller boost?
__________________
K&N Cai, BSR Ported intake, MBRP catback, BBK long tubes, VMax throttle body, 3.73 SS gears, Zex nitrous 125hp shot, window switch, purge,remote bottle opener, bottle heater, Trifecta tune, Hurst short throw, RX catch can, Intake isolator, Ported Intake manifold
jeff4946 is offline   Reply With Quote
Old 07-13-2011, 07:12 PM   #22
SC2150
Account Suspended
 
Drives: 2012 Camaro RS, RX supercharged
Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,070
A dry 50-75 kit is plenty safe if sprayed before the MAF so it can measure and add fuel....no spray hits the motor w/out the added fuel. Give Graham a call direct.

The VMax is so close (I wish I could give the date as we just talked to Pete and the final cuts are pretty much finished or near finished. I can post more next Friday).

The chiller threads are on the SC'd cars and we wont be doing the V6 SC kit for at least another 90 days as we have to recoupe some of the costs from the turbo kits.

Lots of good reading here and we can adapt for NA as well.....but I still think the nitrous kit is the most cost effective:

http://www.camaro5.com/forums/showth...=99515&page=13
SC2150 is offline   Reply With Quote
Old 07-13-2011, 07:30 PM   #23
mpiper
 
mpiper's Avatar
 
Drives: 2011 Black 1LT RS
Join Date: May 2010
Location: Texas
Posts: 496
I'm all for a nice shot of nitrous. But is it feasible to use as a standard item day in and out. Say, activated so if I want to hit it as I enter an on ramp during lunch. Would I potentially be some to open the bottle in the morning and leave it open until night? I'm all set to use this ,if I can run it 24/7 with the shot activating at around 80% throttle ( since it's just a small shot as a throttle booster, not a full race setup.)
__________________
Midnight => 2011 1LT/RS, A6, Roto-Fab CAI & W/W Relocate, MPD Hood, 25%/18% Carbon Tint
See my build journal here.
mpiper is offline   Reply With Quote
Old 07-13-2011, 07:33 PM   #24
SC2150
Account Suspended
 
Drives: 2012 Camaro RS, RX supercharged
Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,070
Just opt for the remote bottle opener and it is a flip of the switch. Arming is also just a switch. Very common and you will be amazed a what a simple 50 shot will do. BUT don't scrimp!!! No cutting corners with spray.

WOT switch, window switch, etc. are all safety options that are a must.
SC2150 is offline   Reply With Quote
Old 07-13-2011, 07:37 PM   #25
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,962
So how much more strain will a 50 shot put on the engine? Seeing that I'm already cranking out 18 psi I'm not looking to have it go boom anytime soon! Honestly I should leave the car the f*#k alone. It's goes plenty fast now and when the fall comes I'll see my "9". But that little red guy on my shoulder keeps asking me whats next!!!!! Maybe that little red guy is Ted.
Supercharged SS is offline   Reply With Quote
Old 07-13-2011, 07:41 PM   #26
GretchenGotGrowl


 
GretchenGotGrowl's Avatar
 
Drives: 11 F150 EB/13 Sonic RS/15 Z06
Join Date: Sep 2010
Location: Little Rock, AR
Posts: 7,049
Quote:
Originally Posted by Supercharged SS View Post
So how much more strain will a 50 shot put on the engine? Seeing that I'm already cranking out 18 psi I'm not looking to have it go boom anytime soon! Honestly I should leave the car the f*#k alone. It's goes plenty fast now and when the fall comes I'll see my "9". But that little red guy on my shoulder keeps asking me whats next!!!!! Maybe that little red guy is Ted.

It's never enough is it? I'm already thinking of thing for phase 3...
__________________
New Ride -- 2015 Z06 2LZ (stock) -- Journal
Old Ride -- 2012 Camaro 2LT/RS (647 RWHP & 726 RWTQ) -- Build Thread
GretchenGotGrowl is offline   Reply With Quote
Old 07-13-2011, 07:46 PM   #27
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,962
Quote:
Originally Posted by GretchenGotGrowl View Post

It's never enough is it? I'm already thinking of thing for phase 3...

Ha! Nope. Doesn't seem to be that way. I should be done but it's just so hard. If a week or two goes by and the car isn't getting something new I go in "mod withdrawl"!
Supercharged SS is offline   Reply With Quote
Old 07-13-2011, 08:04 PM   #28
hypurone
I'm not totally useless..
 
hypurone's Avatar
 
Drives: 2010 SIM 2SS/RS A6 SC LPO Rallies
Join Date: Sep 2009
Location: Cali - NorthBay
Posts: 2,010
Send a message via AIM to hypurone Send a message via MSN to hypurone Send a message via Yahoo to hypurone
Quote:
Originally Posted by skip_168 View Post
a bi-product of methanol is an extremely low boiling point, so the forced induction crowd would inject a small amount into the charge air to absorb some heat & cool the intake charge down.. You could do the same with water, but it would take two to three times as much water to remove the same amount of heat from the charge temp...
I beg to differ. Water has up to 6 times the capability of latent heat absorption than methanol does (depending on who you talk to, IE: Aquamist vs Coolingmist etc). This is directly proportional to how finely you can atomize the water as it is injected.

A brief excerpt from the Aquamist site:

Water to Fuel ratio

We've seen that excess fuel is traditionally used as in-cylinder coolant. We've also seen here that water is a much better alternative for this purpose, since its latent heat is 6 -7 times higher than fuel (energy absorbed as the tiny droplets evaporate)

Latent heat of fuel = 350KJ/kg
Latent heat of Methanol = 1109 Kg/kJ
Latent heat of water = 2256KJ/kg


PLUS, it does not ADD heat to the cylinder burn as methanol would (because meth is a fuel remember) when it reaches the cylinders. PLUS it will remove any carbon build-up on the valves and piston faces as it is converted to steam by its heat absorption... PLUS it is FREE!

Just adding my FHE with water injection.
__________________
"You were really flyin' when I passed you back there!" - Born on 10/05/09 MyCamaroBuildInfo
hypurone is offline   Reply With Quote
Old 07-13-2011, 09:09 PM   #29
Supercharged SS
Account Suspended
 
Drives: 2010 Camaro
Join Date: Feb 2010
Location: Sandy Hook, CT
Posts: 11,962
Iv'e been told the same thing by a few experts. That is why you add the water to make it water/meth. Because the water is better at the cooling part.
Supercharged SS is offline   Reply With Quote
Old 07-14-2011, 08:06 AM   #30
632
Account Suspended
 
Drives: black camaro
Join Date: May 2011
Location: new jersey
Posts: 184
Quote:
Originally Posted by Supercharged SS View Post
So how much more strain will a 50 shot put on the engine? Seeing that I'm already cranking out 18 psi I'm not looking to have it go boom anytime soon! Honestly I should leave the car the f*#k alone. It's goes plenty fast now and when the fall comes I'll see my "9". But that little red guy on my shoulder keeps asking me whats next!!!!! Maybe that little red guy is Ted.
WHAT?
your gonna give up that easy and let me run the first 9 second 1/4?
c'mon, put the nitrous on and get that 9 now!
632 is offline   Reply With Quote
Old 07-14-2011, 08:13 AM   #31
GretchenGotGrowl


 
GretchenGotGrowl's Avatar
 
Drives: 11 F150 EB/13 Sonic RS/15 Z06
Join Date: Sep 2010
Location: Little Rock, AR
Posts: 7,049
Quote:
Originally Posted by 632 View Post
WHAT?
your gonna give up that easy and let me run the first 9 second 1/4?
c'mon, put the nitrous on and get that 9 now!
I think he's got 9 secs without a shot...just has to get the right day and right conditions.
__________________
New Ride -- 2015 Z06 2LZ (stock) -- Journal
Old Ride -- 2012 Camaro 2LT/RS (647 RWHP & 726 RWTQ) -- Build Thread
GretchenGotGrowl is offline   Reply With Quote
Old 07-14-2011, 08:15 AM   #32
GretchenGotGrowl


 
GretchenGotGrowl's Avatar
 
Drives: 11 F150 EB/13 Sonic RS/15 Z06
Join Date: Sep 2010
Location: Little Rock, AR
Posts: 7,049
Quote:
Originally Posted by hypurone View Post
I beg to differ. Water has up to 6 times the capability of latent heat absorption than methanol does (depending on who you talk to, IE: Aquamist vs Coolingmist etc). This is directly proportional to how finely you can atomize the water as it is injected.

A brief excerpt from the Aquamist site:

Water to Fuel ratio

We've seen that excess fuel is traditionally used as in-cylinder coolant. We've also seen here that water is a much better alternative for this purpose, since its latent heat is 6 -7 times higher than fuel (energy absorbed as the tiny droplets evaporate)

Latent heat of fuel = 350KJ/kg
Latent heat of Methanol = 1109 Kg/kJ
Latent heat of water = 2256KJ/kg

PLUS, it does not ADD heat to the cylinder burn as methanol would (because meth is a fuel remember) when it reaches the cylinders. PLUS it will remove any carbon build-up on the valves and piston faces as it is converted to steam by its heat absorption... PLUS it is FREE!

Just adding my FHE with water injection.
I thought he was saying the nitrous cools better than water? I don't know if that's true or not, but you are 100% correct that water cools better than methanol. Like mentioned below you, the mix is where it is at...you get fuel and cooling.
__________________
New Ride -- 2015 Z06 2LZ (stock) -- Journal
Old Ride -- 2012 Camaro 2LT/RS (647 RWHP & 726 RWTQ) -- Build Thread
GretchenGotGrowl is offline   Reply With Quote
Old 07-14-2011, 10:27 AM   #33
Graham@N
 
Drives: Pontiac Firebird
Join Date: Apr 2011
Location: Waco, TX
Posts: 154
Quote:
Originally Posted by SC2150 View Post
Just opt for the remote bottle opener and it is a flip of the switch. Arming is also just a switch. Very common and you will be amazed a what a simple 50 shot will do. BUT don't scrimp!!! No cutting corners with spray.

WOT switch, window switch, etc. are all safety options that are a must.
100%.

Quote:
Originally Posted by Supercharged SS View Post
So how much more strain will a 50 shot put on the engine? Seeing that I'm already cranking out 18 psi I'm not looking to have it go boom anytime soon! Honestly I should leave the car the f*#k alone. It's goes plenty fast now and when the fall comes I'll see my "9". But that little red guy on my shoulder keeps asking me whats next!!!!! Maybe that little red guy is Ted.
In your case probably close to none when you figure the drop in IAT. You are going to be looking at a gain of 70-90hp probably from a 50hp shot. Ill answer your PM today and we can get a little communication going.
Graham@N is offline   Reply With Quote
Old 07-14-2011, 10:31 AM   #34
Graham@N
 
Drives: Pontiac Firebird
Join Date: Apr 2011
Location: Waco, TX
Posts: 154
Quote:
Originally Posted by GretchenGotGrowl View Post
I thought he was saying the nitrous cools better than water? I don't know if that's true or not, but you are 100% correct that water cools better than methanol. Like mentioned below you, the mix is where it is at...you get fuel and cooling.
Not even close of the drop in IAT from water vs a nitrous system. Water can still be used very effectively even in conjunction with nitrous. But for solving IAT, nothing does that like 50-150hp worth of nitrous.
Graham@N is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Nitrous info CamaroSpike23 Forced Induction - V8 62 04-24-2014 10:41 AM
Anybody Spray'n their SS yet - nitrous ? WeeZee Forced Induction - V8 37 12-29-2012 10:56 PM
Clearing up some bad information on nitrous Graham@N Forced Induction - V6 12 07-05-2011 03:13 PM
Nitrous System ?????s PoleCat2SSRS2010 Forced Induction - V8 29 12-08-2010 06:55 PM
Nitrous Info Milk 1027 Wiki 0 08-12-2009 07:26 PM


All times are GMT -5. The time now is 05:56 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.