MY PLANS FOR MY 2010 CAMARO: - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

LosXC451 · 04-06-2009, 04:49 PM

2010 SIM 2SS/RS, black interor

Mods up to date:
-OEM black stripes (originally thought about getting painted gloss, but ended up liking the look of matte black)
-black CAMARO fender emblems from emblempros.com
-matte black taillight bezels
-blacked out sidemarkers (bought 5% tint at auto zone and just put the tint over and cut with an exacto)
-custom painted bowties (flat black with SIM middle)
-LED DRLs
-Adaptive Performance DRL Harness
-AACstyle interior LED conversion kit (white)
-AACstyle license plate LEDs
-MGW shifter know
-chrome turn signal bulbs to give a clear look
-Lloyd's custom floor mats
-Camaro SS black license plate frame

Possible future mods:
-Tints
-Side vent decals from RPI Designs (most likely the ABS black plastic)
-AAcstyle ABL footwell lighting
-MGW short throw shifter
-Exhaust, not sure which one yet

-Intake, most likely roto-fab or halltech
-Silver door and dash panels

By losxc451 at 2010-08-06

bluch · 04-06-2009, 04:50 PM

question. what does a GMPP catback exaust do? improve power or sound or both? and how much do they usually cost with installation?? just wonder, because I may be considering that upgrade but I am not that car upgrade savvy as many ppl on here are.

Chevyrocker · 04-06-2009, 04:55 PM

Any exhaust (cat-back or full) will upgrade both sound and power.

bluch · 04-06-2009, 04:57 PM

$$$?

Chevyrocker · 04-06-2009, 05:04 PM

go to www.gmaccessories.net, pick a dealer and pull up the Camaro and it will show you prices including installation.

bluch · 04-06-2009, 05:10 PM

thanks

drivingincamaro · 04-06-2009, 07:53 PM

i like the black spoiler

*Milk 1027* · 04-06-2009, 07:55 PM

Quote:

Originally Posted by Chevyrocker

go to www.gmaccessories.net, pick a dealer and pull up the Camaro and it will show you prices including installation.

or you can just take a look at the threads in my sig.

GeorgiaSS · 04-06-2009, 08:53 PM

Cat-backs on the C6 vettes did nothing for power only sound. The camaro stock exhaust could be more restrictive. I would have to wait till somebody did a comparison on a dyno. My thoughts for now is just do a cam with headers, electric cutouts with stock mufflers. Headers w/hiflow cats and deleting the resonators should increase the sound.

GeorgiaSS · 04-06-2009, 09:16 PM

I dont blame him on that. My son is 17. He will be riding around in a 12 year old pickup till he learns how to respect horsepower.

LosXC451 · 04-06-2009, 09:19 PM

does anyone know actually if the door sills say camaro or Chevrolet? because in photos I have seen in comes with the ones that say Chevrolet, but on the accessories website they say Chevrolet also.

Camaro68 · 04-06-2009, 09:22 PM

Take pictures please

Panther67 · 04-06-2009, 10:10 PM

Quote:

Originally Posted by LosXC451

PERFORMANCE:

GMPP Catback exhaust (w/ tips)
GMPP Air Intake or Lingenfelter Air Intake
GMPP Short Headers
Hurst Short Throw Shifter (MIGHT ENGRAVE WITH SS OR SOMETHING LIKE THAT)

EXTERIOR:

Maybe GFX (ONLY SIDE AND FRONT THOUGH)
Black powder coated rims
Molded splash guards (silver)
Spoiler in black
Mirrors in black
Door Handles in black

INTERIOR:

Interior trim kit (silver)
Door sill decals

Every thing in mind is good for you plan but IMO if you are getting an LS3 that is the wrong cover and the mud gaurds i am not too sure about i would have to see them installed first none the less the perfect engine covers would have to be the original LS3 Corvette look it really looks amazing and really choice..........

LosXC451 · 04-06-2009, 10:49 PM

Quote:

Originally Posted by Panther67

Every thing in mind is good for you plan but IMO if you are getting an LS3 that is the wrong cover and the mud gaurds i am not too sure about i would have to see them installed first none the less the perfect engine covers would have to be the original LS3 Corvette look it really looks amazing and really choice..........

At first i really did not want to get the molded splash guards but I am going t be driving it a lot, so I don't want it to get scratches or get dirty or something.

Panther67 · 04-06-2009, 11:22 PM

Quote:

Originally Posted by LosXC451

At first i really did not want to get the molded splash guards but I am going t be driving it a lot, so I don't want it to get scratches or get dirty or something.

When you install your splash gaurds make sure you post some pics. ,iwpould really like to see them....

Panther67 · 04-06-2009, 11:28 PM

LosXc, the RS midnight silver rims are not really that dark try some Black chrome on on the wheels just have the stock one black chromed that will look sweet and choice to your camaro color discription.....

:bellyro ll:

drivingincamaro · 04-06-2009, 11:32 PM

Quote:

Originally Posted by Panther67

LosXc, the RS midnight silver rims are not really that dark try some Black chrome on on the wheels just have the stock one black chromed that will look sweet and choice to your camaro color discription.....

:bellyro ll:

yea they should fix the midnight wheels

Panther67 · 04-06-2009, 11:43 PM

Its not about fixing unless you want to pay extra for chrome when you can just have the chrome done after market to give the black chrome look that is just too sexy of a look.......

LosXC451 · 04-10-2009, 08:27 AM

decided not to get the splashbuards after seeing them

UCI CamaroFan · 04-10-2009, 03:08 PM

I like your idea of engraving the hurst shifter. it sounds badass.

*Milk 1027* · 04-10-2009, 03:16 PM

FYI. The hurst shifter will not look like the one you have on the picture.

It will look the same as a stock shifter but the internals will be different.

So you might want to look for an aftermarket shifter ball, if you want to engrave it.

UCI CamaroFan · 04-10-2009, 04:00 PM

Quote:

Originally Posted by Milk 1027

FYI. The hurst shifter will not look like the one you have on the picture.

It will look the same as a stock shifter but the internals will be different.

So you might want to look for an aftermarket shifter ball, if you want to engrave it.

really? where did it say this at?

Oh well, I thought the pictures of the Hurst Shifter were ugly; the leather was too far up on the shifter. I thought the leather should not cover the actual metal rod of the shifter... it makes it not look as legit.

I guess I should cancel my hurst shifter order then lol

2010SSRSM6 · 04-21-2009, 12:48 PM

Talked to my dealer yesterday, the entire tranny has to be dropped to install the shifter. What a Pain the the arse. Thought I would share my frustration.

nol300 · 04-21-2009, 02:17 PM

They are wrong.

Bewenched · 04-21-2009, 06:34 PM

Quote:

Originally Posted by 2010SSRSM6

Talked to my dealer yesterday, the entire tranny has to be dropped to install the shifter. What a Pain the the arse. Thought I would share my frustration.

sounds like the dealer just wants to charge you more labor. I've never heard of having to do that when installing a B&M Shifter.

04-06-2009, 04:49 PM	#1
LosXC451 Drives: 2010 SS SIM w/ RS Join Date: Feb 2009 Location: Miami, Fl Posts: 1,222 View My Garage	MY PLANS FOR MY 2010 CAMARO: 2010 SIM 2SS/RS, black interor Mods up to date: -OEM black stripes (originally thought about getting painted gloss, but ended up liking the look of matte black) -black CAMARO fender emblems from emblempros.com -matte black taillight bezels -blacked out sidemarkers (bought 5% tint at auto zone and just put the tint over and cut with an exacto) -custom painted bowties (flat black with SIM middle) -LED DRLs -Adaptive Performance DRL Harness -AACstyle interior LED conversion kit (white) -AACstyle license plate LEDs -MGW shifter know -chrome turn signal bulbs to give a clear look -Lloyd's custom floor mats -Camaro SS black license plate frame Possible future mods: -Tints -Side vent decals from RPI Designs (most likely the ABS black plastic) -AAcstyle ABL footwell lighting -MGW short throw shifter -Exhaust, not sure which one yet -Intake, most likely roto-fab or halltech -Silver door and dash panels By losxc451 at 2010-08-06 __________________ My car: http://www.camaro5.com/forums/showthread.php?t=17740 Last edited by LosXC451; 08-07-2010 at 11:47 AM.

04-06-2009, 04:50 PM	#2
bluch OH CANADA! Drives: 2011 RAM 1500 LARAMIE Join Date: Mar 2009 Location: Edmonton, AB, CAN Posts: 3,931 View My Garage	question. what does a GMPP catback exaust do? improve power or sound or both? and how much do they usually cost with installation?? just wonder, because I may be considering that upgrade but I am not that car upgrade savvy as many ppl on here are. __________________ Had to trade in the Camaro for a truck :(, but hopefully I can join the Camaro family again one day

04-06-2009, 04:55 PM	#3
Chevyrocker Weekend Rockstar Drives: Depends on the day... Join Date: Mar 2008 Location: West Palm Beach Posts: 1,445	Any exhaust (cat-back or full) will upgrade both sound and power. __________________ *Shortcuts can slow you down...*

04-06-2009, 04:57 PM	#4
bluch OH CANADA! Drives: 2011 RAM 1500 LARAMIE Join Date: Mar 2009 Location: Edmonton, AB, CAN Posts: 3,931 View My Garage	$$$? __________________ Had to trade in the Camaro for a truck :(, but hopefully I can join the Camaro family again one day

04-06-2009, 05:04 PM	#5
Chevyrocker Weekend Rockstar Drives: Depends on the day... Join Date: Mar 2008 Location: West Palm Beach Posts: 1,445	go to www.gmaccessories.net, pick a dealer and pull up the Camaro and it will show you prices including installation. __________________ *Shortcuts can slow you down...*

04-06-2009, 05:10 PM	#6
bluch OH CANADA! Drives: 2011 RAM 1500 LARAMIE Join Date: Mar 2009 Location: Edmonton, AB, CAN Posts: 3,931 View My Garage	thanks __________________ Had to trade in the Camaro for a truck :(, but hopefully I can join the Camaro family again one day

04-06-2009, 07:53 PM	#7
drivingincamaro Drives: 95 civic Join Date: Apr 2008 Location: Chicago Illinois Posts: 5,809	i like the black spoiler __________________

04-06-2009, 08:53 PM	#9
GeorgiaSS Drives: 2010 SS RJT. Join Date: Mar 2009 Location: Georgia Posts: 29	Cat-backs on the C6 vettes did nothing for power only sound. The camaro stock exhaust could be more restrictive. I would have to wait till somebody did a comparison on a dyno. My thoughts for now is just do a cam with headers, electric cutouts with stock mufflers. Headers w/hiflow cats and deleting the resonators should increase the sound. __________________ 07 Trailblazer SS 13:60 @ 102 mph.

04-06-2009, 09:16 PM	#10
GeorgiaSS Drives: 2010 SS RJT. Join Date: Mar 2009 Location: Georgia Posts: 29	I dont blame him on that. My son is 17. He will be riding around in a 12 year old pickup till he learns how to respect horsepower. __________________ 07 Trailblazer SS 13:60 @ 102 mph.

04-06-2009, 09:19 PM	#11
LosXC451 Drives: 2010 SS SIM w/ RS Join Date: Feb 2009 Location: Miami, Fl Posts: 1,222 View My Garage	does anyone know actually if the door sills say camaro or Chevrolet? because in photos I have seen in comes with the ones that say Chevrolet, but on the accessories website they say Chevrolet also. __________________ My car: http://www.camaro5.com/forums/showthread.php?t=17740

04-06-2009, 09:22 PM	#12
Camaro68 Drives: 68 Camaro 327ci 2SS/RS 376ci LS3 Join Date: Mar 2008 Location: Prince William, VA Posts: 2,622 View My Garage	Good plans Take pictures please __________________ 6000 Vehicle Delivered to Customer 6-23-10

04-06-2009, 11:28 PM	#16
Panther67 Drives: 2010 Camaro 2SS RS Join Date: Mar 2009 Location: San Fernando Valley Posts: 332	Black chrome rims LosXc, the RS midnight silver rims are not really that dark try some Black chrome on on the wheels just have the stock one black chromed that will look sweet and choice to your camaro color discription.....:bellyro ll: __________________ "Objects in mirror are farther than they appear"....

04-06-2009, 11:43 PM	#18
Panther67 Drives: 2010 Camaro 2SS RS Join Date: Mar 2009 Location: San Fernando Valley Posts: 332	Personal preference Its not about fixing unless you want to pay extra for chrome when you can just have the chrome done after market to give the black chrome look that is just too sexy of a look....... __________________ "Objects in mirror are farther than they appear"....

04-10-2009, 08:27 AM	#19
LosXC451 Drives: 2010 SS SIM w/ RS Join Date: Feb 2009 Location: Miami, Fl Posts: 1,222 View My Garage	decided not to get the splashbuards after seeing them __________________ My car: http://www.camaro5.com/forums/showthread.php?t=17740

04-10-2009, 03:08 PM	#20
UCI CamaroFan Zot! Drives: Toyota 4Runner Join Date: Feb 2009 Location: Orange County, California Posts: 1,332	I like your idea of engraving the hurst shifter. it sounds badass.

04-10-2009, 03:16 PM	#21
Milk 1027 Camaro➎ moderator Drives: '13 BLK 1LE Join Date: Aug 2008 Location: AZ Posts: 13,375 View My Garage	FYI. The hurst shifter will not look like the one you have on the picture. It will look the same as a stock shifter but the internals will be different. So you might want to look for an aftermarket shifter ball, if you want to engrave it. __________________

04-21-2009, 12:48 PM	#23
2010SSRSM6 SoCal C5 Family Member Drives: My wife crazy with my C5 usage. Join Date: Apr 2009 Location: SoCal Posts: 5,503 View My Garage	Talked to my dealer yesterday, the entire tranny has to be dropped to install the shifter. What a Pain the the arse. Thought I would share my frustration.

04-21-2009, 02:17 PM	#24
nol300 Drives: 92 300ZX TT 2007 Silverado Join Date: Jan 2009 Location: Denver, CO Posts: 328	They are wrong.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
CAMARO WIKI	Tran	Wiki	46	12-17-2013 08:23 PM
Official Camaro Convertible CONCEPT Press Release	Tran	Camaro Convertible Forum	12	11-18-2009 08:05 PM
2010 Camaro Pricing for Canada Announced	garfin	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	503	05-24-2009 05:59 PM
Camaro Chat 9:30-10:00	jdpickering	5th Gen Camaro SS LS LT General Discussions	25	07-22-2008 03:11 PM
Consumer Guide's Impressions of the 2010 Chevrolet Camaro	camaro5	5th Gen Camaro SS LS LT General Discussions	30	04-29-2008 11:20 PM