removing stock rear end body kit - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

dubsat510 · 10-22-2011, 04:58 PM

Im currently in the process of removing the stock rear end body kit ( encasing around exaust) for my 2010 SS. Ive got 6 screws out so far and tried pulling it out from there and it wouldn't give. I'm wondering if there are more hidden fasteners that i need to remove. Any help would be appreciated

techinny · 10-22-2011, 07:54 PM

Search for a thread about replacing the back-up lights/bulbs, the only way to get to them is what you are doing. I think it said there were some "hidden" fasteners but I do not recall exactly where.

*The Stig* · 10-22-2011, 08:00 PM

Are you attempting to remove the GFX rear diffuser? It is held in place with 3M tape as well as with screws.

hrpiii · 10-24-2011, 07:19 AM

to replace my stock diffusor with a new Havoc diffusor, I had to remove the whole back end. No way to remove that diffusor with it on the car as you can not reach all the pieces/harnesses attached.

On a good note, that whole back end comes off in about 5 minutes. So if I ever get rearened, the other CGM camaro in my neighborhood may be missing something. LOL.

10-22-2011, 04:58 PM	#1
dubsat510 Drives: 2010 Black and Orange 2SS Join Date: Aug 2011 Location: Bay Area Posts: 5	removing stock rear end body kit Im currently in the process of removing the stock rear end body kit ( encasing around exaust) for my 2010 SS. Ive got 6 screws out so far and tried pulling it out from there and it wouldn't give. I'm wondering if there are more hidden fasteners that i need to remove. Any help would be appreciated __________________ Dubsat510

10-22-2011, 07:54 PM	#2
techinny Drives: 2010 Camaro 2SS/RS, 2005 GMC 2500HD Join Date: Jul 2011 Location: Upstate NY Posts: 1,134	Search for a thread about replacing the back-up lights/bulbs, the only way to get to them is what you are doing. I think it said there were some "hidden" fasteners but I do not recall exactly where. __________________

10-22-2011, 08:00 PM	#3
The Stig I used to be Stieger.... Drives: a PBM camaro Join Date: Aug 2009 Location: Northern VA Posts: 25,760 View My Garage	Are you attempting to remove the GFX rear diffuser? It is held in place with 3M tape as well as with screws. __________________ thanks for the sig Russ

10-24-2011, 07:19 AM	#4
hrpiii AKA "Beefcake" Drives: CGM w/Black stripes Join Date: Oct 2009 Location: Indy Posts: 3,312	to replace my stock diffusor with a new Havoc diffusor, I had to remove the whole back end. No way to remove that diffusor with it on the car as you can not reach all the pieces/harnesses attached. On a good note, that whole back end comes off in about 5 minutes. So if I ever get rearened, the other CGM camaro in my neighborhood may be missing something. LOL. __________________ Pfadt Suspension, Supercharged, Showstopper 'bling', Pedderized by Bruce and Tuned by Mike Norris Motorsports

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
5th Gen Suspension -- The Book	JusticePete	Suspension / Brakes / Chassis	138	05-09-2013 03:58 PM
V8 Camaro Performance Upgrades List	Milk 1027	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	79	03-04-2013 09:25 AM
ECS Supercharger Kit Goes 10.12 - Stock Bottom End	Sales @ ECS	Forced Induction - V8	41	10-14-2011 03:01 PM
Setting up an IRS/Drivetrain for Drag Racing	Kyle2k	Suspension / Brakes / Chassis	44	06-05-2010 09:17 PM