Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
PFYC
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Other Generations > 1st & 2nd Generation Camaros

1st & 2nd Generation Camaros 1967-1969 Camaros / 1970-1981 Camaro

Reply
 
Thread Tools
Old 11-07-2011, 02:48 PM   #1
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Blown LS3 in Sec. Gen

Well I am going to do it. ( For those who care)

Just ordered my TVS2300 supercharged LS3 from Turn Key and all the parts needed to drop that Baby in my 30,000 original mile 1980 Z28 Camaro.

This should be a very intertesting project. One I have thought long and hard about. Over Drive no Overdrive, LS6 Blown, LS9, LS7 ,oh my goodness the Choices.

Well the verdict is in, no Overdrive and a blown LS3. Now if it only fits as well as they say it will. It should be a blast. 500 lbs less car Maybe more if you figure the weight reduction in the engine compartment.

Oh Ya ...The funny part...I am pulling a 6/71 supercharged 350 to put this one in.

You may ask why.... I love fuel injection, intercoolers and drag reduction!

Out with the old in with the new....

The only thing left bothering me is ?

Should I Have gotten the OD trans as well ? Oh well. I guess we will see.

Well...bottom line. Stay tuned for updates. I am told 3 weeks for the motor so I will keep those who are interested informed and will post an occasional picture. The Before pic is in My albums under my screen name for those who care.


Sorry to bore those who don't.....If anybody has had any experience with such a project I am all ears.

Thanks for your Time.....
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................
carguy is offline   Reply With Quote
Old 11-07-2011, 03:35 PM   #2
itsadryheat79
 
itsadryheat79's Avatar
 
Drives: 2012 ZL1 10SSRS (2)79Z28 72RS 69Z
Join Date: May 2009
Location: Arizona
Posts: 298
Send a message via Yahoo to itsadryheat79
I did an LS7 in mine - Not sure of your build but work planning to get traction for all that power to the ground and stopping
- My build http://www.pro-touring.com/showthrea...ro-Crazy-in-AZ

BTW: I was told my engine would be three weeks too - different vendor and defiantly did not happen that fast!
__________________
- Buttons and Skulls -
miss my annimated signature.
itsadryheat79 is offline   Reply With Quote
Old 11-22-2011, 09:02 PM   #3
rbad72bowtie
 
Drives: 1972 camaro
Join Date: Jul 2011
Location: new york
Posts: 4
i have an ls in my camaro with a 3 speed and hated it so im putting the overdrive in. i also have 4:10 gears so highway driving sucked
i pulled a 1300 hp procharged small block from my car to put the ls in and its more fun to drive and alot less noise lol
rbad72bowtie is offline   Reply With Quote
Old 11-22-2011, 09:17 PM   #4
Drew10
Enjoys a good train wreck
 
Drew10's Avatar
 
Drives: 2010 IBM Camaro 2SS/RS
Join Date: Nov 2009
Location: Cincinnati, OH
Posts: 1,819
I love the idea. Please keep us updated on the progress. Thanks for sharing.

Edit: just checked your pictures, you my friend have an awsome collection. Keep up the good work.
Drew10 is offline   Reply With Quote
Old 12-06-2011, 08:32 AM   #5
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Well, you were right on the three weeks....still waiting.

I think everybody went to Glamus over Thanksgiving and forgot to build my motor. They were blaming the timing on Magnusun parts not all being there but this is my third Maggie plus maggie upgrades and have never had any delay from them and they are in Cali. Just like turn Key...granted not across the street but not like it should take a month for shipping or anything.

Anyway, I am pretty committed at this point. Motor is out, and sold. Got a big empty hole waiting for my new power plant. Was told should go out this week.Dyno is supposedly down. They can run it with a load but no read outs until its fixed. Might have them just run it to seat everything and wait and put It on the chassis dyno when I get it in here. I guess we will see. Just waiting and can't wait to get that baby in. I opted out of the overdrive for now. I figured I would try it with the setup I am currently running since it was pretty dialed in with my other blower motor.

Might need to change later but I thought I would at least try it before changing. If I go OD I will probably throw a nine inch in at the same time so I don't have to keep buying drive shafts. I have a 3:42 with turbo 350 now so far so good and I have pretty much beat the heck out of it so might as well Finnish them off.

If I can't get some of that power hooked up nothing will probably break....but, that's no fun.

I will start post some pics as soon as the crate arrives....can't wait, Merry Christmas to me !

Stay turned.....
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................
carguy is offline   Reply With Quote
Old 12-06-2011, 02:34 PM   #6
itsadryheat79
 
itsadryheat79's Avatar
 
Drives: 2012 ZL1 10SSRS (2)79Z28 72RS 69Z
Join Date: May 2009
Location: Arizona
Posts: 298
Send a message via Yahoo to itsadryheat79
A charged LS3 with a 350 behind it - interesting!
hmmm with this much HP will it blend? - http://willitblend.com/videos/view/130
__________________
- Buttons and Skulls -
miss my annimated signature.
itsadryheat79 is offline   Reply With Quote
Old 12-06-2011, 02:39 PM   #7
The Stig
knows 2 facts about ducks
 
The Stig's Avatar
 
Drives: ...and they're both wrong
Join Date: Aug 2009
Location: The HMS Invincible
Posts: 26,690
__________________
Click to view my build thread
The Stig is offline   Reply With Quote
Old 12-06-2011, 07:51 PM   #8
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Quote:
Originally Posted by stieger View Post
Nothing to show but a big hollow engine compartment right now. If you want to see pics of the car check out my albums. Plenty of pics there. As soon as there is something to take a picture of there will be plenty along with detailed info on how it's going together. When motor arrives there will be pics same day!

So all who want pics give turnkey a call and tell them to send me my motor !
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................
carguy is offline   Reply With Quote
Old 12-06-2011, 07:55 PM   #9
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Before......

http://camaro5.com/forums/album.php?...ictureid=14198


http://camaro5.com/forums/album.php?...ictureid=14197

I will take a pic of the empty engine compartment tomorrow....
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................
carguy is offline   Reply With Quote
Old 12-06-2011, 10:08 PM   #10
calbert1999
Camaro SS Lover
 
calbert1999's Avatar
 
Drives: 2010 Camaro 2SS/RS Black IOM
Join Date: Jun 2010
Location: Toronto, Ontario (Canada)
Posts: 2,852
Get forged crank, pistons and solid stainless intake and exhaust valves. Lot's of dead boosted LS3's around lately.
calbert1999 is offline   Reply With Quote
Old 12-07-2011, 07:06 AM   #11
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
QUOTE=calbert1999;4128342]Get forged crank, pistons and solid stainless intake and exhaust valves. Lot's of dead boosted LS3's around lately.[/QUOTE]

Done all that....Nothing but the good stuff !

I am a blower motor addict and have personally experienced the Wrath of too much boost on several occasions. This will be my 3rd Blown LS3 and so far so good, although I am stepping it up on the boost so Forged Guts is a must !

Although, I have two Blown 2010's one with almost 30,000 miles that has had the blower on it since i brought it home from the dealer and all I have broken is axles and Trans output shaft. All covered on Warranty.( 8lbs Boost 570 rwhp, 652 at crank))

I have also set up Three others with the same combo...one a convertible. Again nothing broken there yet either, except axles and tranny's. Need a good tune, good gas, and fuel system and all is good.

Just got to know when to stop boosting. I am pushing it, but if she goes, its back to TurnKey...or someone else if my motor doesn't come soon!

http://http://www.turnkeyenginesupply.com/products/LS3-6.2L-Supercharged-V%252d8-710-HP.html

This is my package only adding TVS2300 instead of Ken Belle only for hood clearance reasons.

Turn Key has many Hi performance supercharged engine packages all solid....just need to get mine !



Still waiting
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................

Last edited by carguy; 12-07-2011 at 07:40 AM.
carguy is offline   Reply With Quote
Old 12-07-2011, 10:59 AM   #12
itsadryheat79
 
itsadryheat79's Avatar
 
Drives: 2012 ZL1 10SSRS (2)79Z28 72RS 69Z
Join Date: May 2009
Location: Arizona
Posts: 298
Send a message via Yahoo to itsadryheat79
Hmm - TVS2300 and Kenney Bell - any reason you did not do a Whipple?
__________________
- Buttons and Skulls -
miss my annimated signature.
itsadryheat79 is offline   Reply With Quote
Old 12-07-2011, 12:27 PM   #13
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Quote:
Originally Posted by itsadryheat79 View Post
Hmm - TVS2300 and Kenney Bell - any reason you did not do a Whipple?
Just knew from measuring my existing cars that I think I can get it under the factory hood. Also have done 5 Maggie's already so pretty familiar with them and even have some extra pulleys and belts sitting around.
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................
carguy is offline   Reply With Quote
Old 12-07-2011, 02:54 PM   #14
calbert1999
Camaro SS Lover
 
calbert1999's Avatar
 
Drives: 2010 Camaro 2SS/RS Black IOM
Join Date: Jun 2010
Location: Toronto, Ontario (Canada)
Posts: 2,852
Quote:
Originally Posted by carguy View Post
Just knew from measuring my existing cars that I think I can get it under the factory hood. Also have done 5 Maggie's already so pretty familiar with them and even have some extra pulleys and belts sitting around.
You should try someting different.
Curious though, why a LS3? How come you didn't get them to bore it to a 418 or 427?
calbert1999 is offline   Reply With Quote
Old 12-07-2011, 04:50 PM   #15
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Quote:
Originally Posted by calbert1999 View Post
You should try someting different.
Curious though, why a LS3? How come you didn't get them to bore it to a 418 or 427?
Should have had it stroked but started out with the LS6 supercharged package that was quite a bit cheaper...than one thing lead to another and I started talking to Kolby at Turn Key and he said he saw a couple second gen camaro's with the same package at SEMA and they were under hood so I bit the bullet and went to the 700hp package.

But as we sit here today I can't tell you how many times I have almost picked up the phone to see if it was too late to stroke it but that complicates too many things at this stage of the game. I would have to overdrive the blower on the back side to compensate for the increase ci's as well as a new crank, so yes looking back to do it again I would go with a 427 ci version of the ls3 but in reality, I don't think it's going to make much difference on the street and it's nuttin but a toy for the street so I think I am pretty much over the top for now anyway. My2010's keep me grinning all day and this package should be even more fun...can't wait.

Got a friend that put a Ford Coyote Motor in a really clean but old70's maverick.
That's what started this Krap. It is an absolute ball!

Now it's my turn......lol

And as I am writing this he is scouring the net for a Pinto...

He is all into the power to weight ratio thing....

Where it ends who knows....if I loose one in my 2010's I will definitely stroke it.

You kinda stabbed me in the heart with the question cause it has been bothering me everyday that I didn't. Just hadnt told anybody
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................
carguy is offline   Reply With Quote
Old 12-07-2011, 11:03 PM   #16
calbert1999
Camaro SS Lover
 
calbert1999's Avatar
 
Drives: 2010 Camaro 2SS/RS Black IOM
Join Date: Jun 2010
Location: Toronto, Ontario (Canada)
Posts: 2,852
Quote:
Originally Posted by carguy View Post
Should have had it stroked but started out with the LS6 supercharged package that was quite a bit cheaper...than one thing lead to another and I started talking to Kolby at Turn Key and he said he saw a couple second gen camaro's with the same package at SEMA and they were under hood so I bit the bullet and went to the 700hp package.

But as we sit here today I can't tell you how many times I have almost picked up the phone to see if it was too late to stroke it but that complicates too many things at this stage of the game. I would have to overdrive the blower on the back side to compensate for the increase ci's as well as a new crank, so yes looking back to do it again I would go with a 427 ci version of the ls3 but in reality, I don't think it's going to make much difference on the street and it's nuttin but a toy for the street so I think I am pretty much over the top for now anyway. My2010's keep me grinning all day and this package should be even more fun...can't wait.

Got a friend that put a Ford Coyote Motor in a really clean but old70's maverick.
That's what started this Krap. It is an absolute ball!

Now it's my turn......lol

And as I am writing this he is scouring the net for a Pinto...

He is all into the power to weight ratio thing....

Where it ends who knows....if I loose one in my 2010's I will definitely stroke it.

You kinda stabbed me in the heart with the question cause it has been bothering me everyday that I didn't. Just hadnt told anybody
Sorry, bro'. But, seemed to me it just made more sense especially considering the cost associated, and the block for a 376, 418 or 427 is all the same.

But, yes at 700rwhp. that will be plenty for the street.

I'm in the same boat as you waiting for engine to get done so I can drive, unfortunately for me winter is here, and won't be able to drive until spring, so kind of takes away the enjoyment. My engine build has been going on since mid June.

Any eta for when you will get the new monster engine?
calbert1999 is offline   Reply With Quote
Old 12-08-2011, 03:18 AM   #17
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Quote:
Originally Posted by calbert1999 View Post
Sorry, bro'. But, seemed to me it just made more sense especially considering the cost associated, and the block for a 376, 418 or 427 is all the same.

But, yes at 700rwhp. that will be plenty for the street.

I'm in the same boat as you waiting for engine to get done so I can drive, unfortunately for me winter is here, and won't be able to drive until spring, so kind of takes away the enjoyment. My engine build has been going on since mid June.

Any eta for when you will get the new monster engine?
Talked to Kolby tonight...he said should be finishing up by Friday....

I guess we will see. Winter here as well just no snow yet. I am building or starting to build the fuel system now. I want to put the pump in the tank instead of using an external pump that they send with the kit.

I am having a tank built at rock valley as we speak. They are working with aero motive to custom build me a tank that I can service the pump and filters from the rear end side of the tank without dropping the tank.

I wanna make sure the pump stays cool and the best way to do that is put it in the tank.

Already sold my other motor so I am ready to rock.
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................
carguy is offline   Reply With Quote
Old 12-08-2011, 11:17 AM   #18
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Here is the big hole I promised. Sorry about the quality...Phone pic.

Name:  IMG-20111208-00069.jpg
Views: 863
Size:  95.5 KB
Name:  IMG-20111208-00067.jpg
Views: 1032
Size:  133.5 KB

For a bonus I added my buddy's `1970 Maverick with coyote motor.

Name:  IMG-20111208-00071.jpg
Views: 1462
Size:  152.6 KB
Name:  IMG-20111208-00072.jpg
Views: 1238
Size:  154.4 KB

yes he will be painting it...just enjoying it until the snow flies for now. Boy does at haul Azz!
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................

Last edited by carguy; 12-08-2011 at 11:32 AM.
carguy is offline   Reply With Quote
Old 12-08-2011, 11:22 AM   #19
midnighter
Account Suspended
 
Drives: nothing
Join Date: Nov 2010
Location: a hole
Posts: 21,173
Quote:
Originally Posted by carguy View Post
Here is the big hole I promised. Sorry about the quality...Phone pic.

Attachment 313304

For a bonus I added my buddy's `1970 Maverick with coyote motor.

Attachment 313305
Attachment 313306

yes he will be painting it...just enjoying it until the snow flies for now. Boy does at haul Azz!
That's a sick Maverick!
midnighter is offline   Reply With Quote
Old 12-08-2011, 11:42 AM   #20
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Quote:
Originally Posted by midnighter View Post
That's a sick Maverick!
Yes it is !

I never thought I would say I thought there was such a thing as a sick Maverick ! but this my friend is just that.

This thing breaks the tires loose at 80MPH.

I didn't even think there were any Mavericks left...Thought they all desolved. This thing is clean. He bought it for 6 grand with a 351 in it and sold motor and trans.

It has a c4 3 speed auto with 3:25 gears in a 8 inch rear.

Blows peoples minds. Nothing more fun than going to the Ford dealer...or anywhere else for that matter, to get the oil Changed ! The facial expressions when they open the hood are worth a million bucks.

Not a true hard core Ford guy but I can tell you there have been a lot of vettes and Camaros left sitting at the stop light wondering what the heck just happened.


Anyway...not a Ford Thread so I will leave it at that. Just thoght it was worth sharing in case you pull up next to a green 70 Maverick in Illinois at a stop light. Be warned...some things aren't always how they appear.

Good day folks and as soon as I get my motor I will begin the instal details for those who have intrest. Should be fun. Hopefully I will be able to take a Maverick.
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................
carguy is offline   Reply With Quote
Old 12-13-2011, 07:23 PM   #21
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Well another set. Back.... Manual throttle body interferes with Maggie Drive setup. Have to switch to drive by wire. Now I have to wait for a retune to include drive by wire. I will also loose the kick down function on the turbo 350. No biggie....
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................
carguy is offline   Reply With Quote
Old 12-14-2011, 03:54 PM   #22
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Blown LS3 waiting to go in....

Well,

Were getting Closer. Here is the l;ittle jewel as it is being finnished up at turn Key. Should go on Dyno Tomorrow or Friday.

Name:  image001.jpg
Views: 776
Size:  56.6 KB

Name:  image002.jpg
Views: 810
Size:  48.7 KB

Name:  image003.jpg
Views: 864
Size:  50.3 KB

Name:  image004.jpg
Views: 764
Size:  55.1 KB
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................
carguy is offline   Reply With Quote
Old 12-14-2011, 10:44 PM   #23
calbert1999
Camaro SS Lover
 
calbert1999's Avatar
 
Drives: 2010 Camaro 2SS/RS Black IOM
Join Date: Jun 2010
Location: Toronto, Ontario (Canada)
Posts: 2,852
Wow. Nice works. All the shiny billet pulleys. Is this a custom LS3? Definately, not crate GM stuff.
calbert1999 is offline   Reply With Quote
Old 12-15-2011, 07:56 AM   #24
carguy
Carguy
 
Drives: 57Chevy,67,80,2@10's camaro's,04SSR
Join Date: Jan 2009
Location: Freeport,IL
Posts: 519
Quote:
Originally Posted by calbert1999 View Post
Wow. Nice works. All the shiny billet pulleys. Is this a custom LS3? Definately, not crate GM stuff.
It was built by turnkey engine supply they have many LS packages available from mild to wild....

This is their 710 HP version only they put a maggie on it for me instead of a Ken Bell. I was worried about hood clearance. I want to keep it under my stock Z28 hood.

Wheter it fits or not or should I say I will have to see what I have to do to Make it fit....Soon as it gets here.

www.TurnKeyEngine.com
__________________

2010 SS/RS LS3, 21" Rims, SLP lowering Kit & sway bars, TVS2300, Hennesy CAI, Kooks LT Headrers & Cats, Corsa Exhaust, RIP Shift ST shifter, SLP Hood & Spoiler, Slp Black out package - Grill SS & Rear SS Emblems, ADM Dual Fuel Pump , 3.6 upper Pulley, 10% overdriven Innovators West Crank Pulley& Pin Kit.

.................................................. ..............................

Last edited by carguy; 12-15-2011 at 08:22 AM.
carguy is offline   Reply With Quote
Old 02-06-2012, 02:45 PM   #25
Oneslowz28
Account Suspended
 
Drives: 2012 Camaro ZL1 #1265
Join Date: Jan 2009
Location: McHenry, IL
Posts: 598
Very cool, should be fun. Any recent updates?
Oneslowz28 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
4th Annual GM Performance Parts LSX Shootout!! nmcajeff Dragstrip and Launch Techniques Discussion 3 07-30-2010 12:05 PM
4th Annual GM Performance Parts LSX Shootout!! nmcajeff Off-topic Discussions 0 07-28-2010 08:28 AM
4th Gen 1/4 mile times versus 5th Gen 1/4 mile times Rock36 Dragstrip and Launch Techniques Discussion 52 07-29-2009 10:01 PM
First 2010 Camaro in the 11's! HPE550 Camaro: 11.67 @ 121 mph Video! Hennessey Performance Camaro Photos | Spyshots | Video | Media Gallery 135 05-31-2009 05:43 PM
5th Gen Camaro LS3 info from Chevy Hi-Po...READ TAG UR IT Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 295 03-07-2008 10:06 AM


All times are GMT -5. The time now is 12:30 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.