Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Hines Performance (HPE)
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Member Car Journals

Member Car Journals Want to keep a long term Camaro project journal to share with the community? Use this forum to create a single thread which you can update over time to document the progress.

Reply
 
Thread Tools
Old 12-03-2011, 12:58 AM   #101
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Quote:
Originally Posted by SSE 4 2SS View Post
G,

I'm really liking the things you've done to this car... Look forward to seeing you again at the next Fest...

Looked, but didin't see this pic so I hope you don't mind me posting it here... L-R

Blue70SS, MTCWBY, SSE 4 2SS, Mercuryman, Speedster, Woody55
Nice picture... can hardly wait till next Cfest
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 01-12-2012, 11:43 PM   #102
Stealth 2010 2SS/RS
 
Stealth 2010 2SS/RS's Avatar
 
Drives: Black 2SS/RS M6
Join Date: Mar 2010
Location: Minnesota, Vadnais Heights
Posts: 486
car sounds sick man and the corsa touring sound great too, thats what i run on my car, hows the diff holding up?
__________________
2010 LS3 2SS/RS M6
AirAid Cold Air Intake, AAC LED sidemarkers, AAC P13w plasmas drl, Kook's Custom 1-7/8" Headers, Corsa Hybrid Exhaust
JRE 445 Cam Package, JRE SCT Tune, RX Catch Can and Breather
Tech AFX Heater Hose Relocation Kit, Black Chrome Wheels
Pfadt trailing and toe arms, Pfadt solid subframe mounts, Pfadt diff bushings, Street Slayer Twin Carbon
Technostalgia Camaro LED taillights, CTS-V Front Brakes, Powder Coated Calipers By ME
MGW Short Throw Shifter
Complete ZL1 Rearend Swap
Stealth 2010 2SS/RS is offline   Reply With Quote
Old 01-13-2012, 04:08 PM   #103
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Talking

Quote:
Originally Posted by Stealth 2010 2SS/RS View Post
car sounds sick man and the corsa touring sound great too, thats what i run on my car, hows the diff holding up?
Couldn't be happier - so much quieter than the OEM. I'll put it to the test this summer at Bandimere. No more weak links to fix.
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 02-20-2013, 10:32 PM   #104
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Remote engine oil cooler, M6 tranny cooler, Torq Dual pass Heat Exchanger with fans

For others looking to add oil coolers and upgraded Torq dual pass heat exchanger w/dual fans...... a few pics!

This work was done by RMCR (Rocky Mountain Competitive Research) in Colorado Springs Colorado:

Had some minor trimming of the back side of the bumper to accomodate the dual pass engine oil cooler.
Attached Images
                                             
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.

Last edited by Blue70SS; 02-20-2013 at 10:50 PM.
Blue70SS is offline   Reply With Quote
Old 02-20-2013, 11:01 PM   #105
Vette TPI
 
Vette TPI's Avatar
 
Drives: 1987 Corvette TPI
Join Date: Mar 2012
Location: Littleton
Posts: 549
The grille has a really nice touch with this car! Love all the small details and add on's it really looks fluid and great! It's about 23 mph faster than my car in the 1/4
__________________
Vette TPI is offline   Reply With Quote
Old 02-20-2013, 11:55 PM   #106
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Quote:
Originally Posted by Vette TPI View Post
The grille has a really nice touch with this car! Love all the small details and add on's it really looks fluid and great! It's about 23 mph faster than my car in the 1/4
Thanks! BTW, saw your post....you might want to check with Brian Tremblay of Wyo Speed on your valve cover leak BTW. He worked at Laramie GMAC before starting up his own speed shop. He's on facebook and Camaro Club of the Rockies page.
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 02-21-2013, 07:30 PM   #107
Vette TPI
 
Vette TPI's Avatar
 
Drives: 1987 Corvette TPI
Join Date: Mar 2012
Location: Littleton
Posts: 549
Quote:
Originally Posted by Blue70SS View Post
Thanks! BTW, saw your post....you might want to check with Brian Tremblay of Wyo Speed on your valve cover leak BTW. He worked at Laramie GMAC before starting up his own speed shop. He's on facebook and Camaro Club of the Rockies page.
Thanks for your help!
__________________
Vette TPI is offline   Reply With Quote
Old 02-21-2013, 10:14 PM   #108
SSE 4 2SS
Boosted Moderator
 
SSE 4 2SS's Avatar
 
Drives: Bone Stock LS3
Join Date: Sep 2009
Location: Kyle Tx
Posts: 13,567
Send a message via AIM to SSE 4 2SS Send a message via Yahoo to SSE 4 2SS
Garth, wow, really nice detail work going on.... Very cool... no pun intended...
__________________
If the car feels like it is on rails, you are probably driving too slow. -Ross Bentley

Horsepower is how fast you hit the wall.
Torque is how far you take the wall with you.

“If everything seems under control, you're just not going fast enough.” Mario Andretti

If you can turn, you ain't going fast enough...
SSE 4 2SS is offline   Reply With Quote
Old 02-21-2013, 10:20 PM   #109
Merc
COTW 12/5/11
 
Merc's Avatar
 
Drives: 2010 Camaro 2SSRS IOM
Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 8,658
Nice!

__________________
Merc is online now   Reply With Quote
Old 02-23-2013, 01:34 AM   #110
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Quote:
Originally Posted by SSE 4 2SS View Post
Garth, wow, really nice detail work going on.... Very cool... no pun intended...
Quote:
Originally Posted by Merc View Post
Nice!

Thanks, Robert and Brian

COOL is the goal! Next up is the LPE/Rotofab innercooler install, with stuffing the RX monster catch can in place and get Torq's Meziere IC pump installed and see where the COOL factor is..... moving everything around on the drivers side. Wish me luck
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 02-25-2013, 11:35 AM   #111
Ivan @ Southwest Speed

 
Ivan @ Southwest Speed's Avatar
 
Drives: '10 2SS/RS, '96 Z28
Join Date: May 2009
Location: Rio Rancho, NM
Posts: 11,861
Clean work there brotha! Love what you're on to man.

See ya in Golden soon Garth!
Ivan
Ivan @ Southwest Speed is offline   Reply With Quote
Old 02-25-2013, 04:05 PM   #112
AngelSpeedFreak
Most hated in NM....
 
AngelSpeedFreak's Avatar
 
Drives: Boosted, Cammed, Bagged, Dipped...
Join Date: Sep 2011
Location: New Mexico
Posts: 2,888
That heat exchanger looks great....
__________________
AngelSpeedFreak is offline   Reply With Quote
Old 02-26-2013, 10:45 AM   #113
Mike@RMCR
 
Mike@RMCR's Avatar
 
Drives: Supercharged
Join Date: Oct 2009
Location: Colorado Springs
Posts: 314
Quote:
Originally Posted by Blue70SS View Post
For others looking to add oil coolers and upgraded Torq dual pass heat exchanger w/dual fans...... a few pics!

This work was done by RMCR (Rocky Mountain Competitive Research) in Colorado Springs Colorado:

Had some minor trimming of the back side of the bumper to accomodate the dual pass engine oil cooler.

Thanks Garth

Always a pleasure to work with you.

We offer several versions of this cooler for the oil and trans. I also have a dual pass radiator that we offer as well.

These are great mods for autocross and high HP builds.
Mike@RMCR is offline   Reply With Quote
Old 02-26-2013, 06:24 PM   #114
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Quote:
Originally Posted by Ivan @ Southwest Speed View Post
Clean work there brotha! Love what you're on to man.

See ya in Golden soon Garth!
Ivan


Quote:
Originally Posted by AngelSpeedFreak View Post
That heat exchanger looks great....
Thanks

Are you coming too?
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.

Last edited by Blue70SS; 02-26-2013 at 11:47 PM.
Blue70SS is offline   Reply With Quote
Old 04-09-2013, 05:26 PM   #115
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Engine Compartment Reorganization!

Seemed like time for updated pictures.....

I installed the LPE/Rotofab 1 gal SC reservoir tank, which required moving the Elite Engineering catch can, at which time I upgraded to the RX Monster catch can to handle higher boost and future needs since I'm still 3% underdriven on the harmonic balanancer. Monster catch can was quite the squeeze with a modified Magnuson coolant bracket, 120 degreen AN fittings to just barely clear the OEM hood, and hose routing utilizing a series of Billet Specialties hose separators. 55 gpm Meziere SC pump was on hand, but the supplied bracket wouldn't even fit - let alone the pump. As luck would have it, I called and Lingenfelter had just come out with an upgraded pump for the CTSV and ZL1 which hadn't been tried on the SS yet. Fits perfect with one added screw and a home made 2" long hose isolator, and according to testing done by LPE, INSTALLED it flows more than both the Meziere 20 gpm pump AND the 55 gmp pump at 1/2 the cost of the 55 gpm Meziere. Plenty of belt wrap on my 2.75" pully now with the addition of an extra idler pully.
Attached Images
         
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-09-2013, 06:46 PM   #116
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Here's a few more 10 rib pully alignment pics that might be good reference for you Jeremy..... I'd pay special attention to how close the alternator pully is to the alternator casing. I purposely left the pictures huge for more clarity.
Attached Images
     
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-09-2013, 06:49 PM   #117
2SS45th


 
2SS45th's Avatar
 
Drives: 11 Seconds or Faster
Join Date: May 2012
Location: Arvada, Colorado
Posts: 2,804
Perfect, thanks Garth! Hopefully I can get my belt tracking straightened out (no pun intended) and get to the track soon.
__________________
I Ain't About That Stock Life.

2SS45th is offline   Reply With Quote
Old 04-19-2013, 10:56 AM   #118
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Proven Wicked Tow Hook installed and easily REMOVEABLE!

pics and more at the following Skydrive Link: http://sdrv.ms/13mjuPN
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-19-2013, 12:45 PM   #119
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Lingenfelter 2-Step mounting location

Merc (Brian).... here's the pics of where I mounted my LPE 2-step. This is where another Lingenfelter customer mounted his - "Se7en" (Brandon). The Lingenfelter CTAP-001 Clutch/Throttle Position sensor worked great for the clutch switch and has "window" sensitivity settings (called hysteresis) , plus I can set at what % in the movement of the clutch pedal that the switch activates. I had it working great in testing.... just have to rewire (move wiring), since I moved the 2-Step to the opposite side of the engine compartment when I installed the LPE/Rotofab 1 gal supercharger coolant reservoir and RX Monster catch can.
Attached Images
        
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-19-2013, 01:23 PM   #120
Merc
COTW 12/5/11
 
Merc's Avatar
 
Drives: 2010 Camaro 2SSRS IOM
Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 8,658
Hey Bud you do nice work. I was looking for the settings on the CTAP-001 sorry if I mislead you.

__________________
Merc is online now   Reply With Quote
Old 04-19-2013, 01:58 PM   #121
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Quote:
Originally Posted by Merc View Post
Hey Bud you do nice work. I was looking for the settings on the CTAP-001 sorry if I mislead you.

Here you go Merc... keep in mind my engagement being at 50%
might not be right for your clutch.

... I have the RPS/Hendrix Street Slayer Billet Triple Carbon clutch
that engages really high, but never has a disengagement problem
on high RPM shifts.

Also I maxed out the hysteresis to 4.5 to keep from any chance of
on/off problems if close to the engagement point..... for the same
reasons of the triple carbon clutch.
Attached Images
  
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-19-2013, 02:43 PM   #122
Merc
COTW 12/5/11
 
Merc's Avatar
 
Drives: 2010 Camaro 2SSRS IOM
Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 8,658
THX Bud! Good starting point, I only have a twin disc ACT. I'll let you know how it goes when I test it out.

__________________
Merc is online now   Reply With Quote
Old 04-19-2013, 05:23 PM   #123
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Quote:
Originally Posted by Merc View Post
THX Bud! Good starting point, I only have a twin disc ACT. I'll let you know how it goes when I test it out.

cool good luck with the testing
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
Old 04-19-2013, 08:06 PM   #124
Merc
COTW 12/5/11
 
Merc's Avatar
 
Drives: 2010 Camaro 2SSRS IOM
Join Date: May 2009
Location: Abbotsford BC Canada
Posts: 8,658
Showers have stopped and the driveway at Bill's is dry enough. Let you know how it goes.

__________________
Merc is online now   Reply With Quote
Old 04-22-2013, 09:28 AM   #125
Blue70SS

 
Blue70SS's Avatar
 
Drives: 2010 LS3Camaro2SSRS IOM in/out
Join Date: Aug 2009
Location: Denver
Posts: 2,035
Quote:
Originally Posted by Blue70SS View Post
Here you go Merc... keep in mind my engagement being at 50%
might not be right for your clutch.

... I have the RPS/Hendrix Street Slayer Billet Triple Carbon clutch
that engages really high, but never has a disengagement problem
on high RPM shifts.

Also I maxed out the hysteresis to 4.5 to keep from any chance of
on/off problems if close to the engagement point..... for the same
reasons of the triple carbon clutch.
If anyone else needs any pointers on installing the Lingenfelter CTAP-001 Clutch/Throttle Position sensor, I will be glad to give pointers. Merc got the version with the longer Purple wire so any disconnecting and moving the actual adjustable unit would be easier..... something I mentioned to LPE while Beta Testing the unit. The biggest thing to help is Do Not remove the clutch switch to get the connector off..... looks like a royal PITA. I removed the same switch off the brake switch and examined how the connector came off and too a lot of pictures with my camera of the positioning of the current clutch switch harness using mirrors. Seem to remember bending a small screwdriver to make a good harness clip removal tool. Pulled the lower left footwell paneling off and fuse panel cover. Put drivers seat back as far as possible (didn't remove) and steering wheel as high as it could go. Left arm was a tight squeeze to get my hand touching the connector, and right arm under the dash with the home made removal tool was like playing a game of twister. Then had a printed out picture of the position of the connector to my side to reverence so I could interpret what I was feeling. Presto.... got it off. Installing the new one that goes between the OEM harness and the existing clutch switch is much easier than the removal. I also added just a tad of light bulb grease to the connection to make it slide on easier. But I would definitely stay away from removing the existing switch to do it. I have fairly big hands and was able to do it. Or.... have a friend or mechanic with smaller hand help you out. Switch works great! What I really like is being able to adjust at what point in the clutch pedal travel the activation occurs since all clutches have different engagement points... plus may need adjustment later as clutch wears and the engagement point starts to changes. Also, I maxed out the hysteresis to 4.5 to keep from any chance of on/off problems if close to the engagement point in the clutch pedal travel..... since I have the triple carbon clutch and Really engages! (may play around with the adjustment later for fine tuning) For those that don't know, the "hysteresis" that Jason Haines from Lingenfelter built in, is so you have a "window" for the activation point - without this feature, if you have the clutch pedal at the activation point and moved slightly (like during hard launches)..... the activation could be turning on/off instead of staying activated. His install instructions explain everything really good.
__________________
LPE 650+,IOM Pearl White Rallys
743 RWHP 681 TQ @91,TVS2300 10/14 OD 2.75/NW 102mm,RDS
NLP spoiler/GM splitter/Torq HE-fans/oil-tranny coolers/IC1000cc
boosted LPE Twin Pump,GT9,Coil Covers,Mats,Pedals/ADM Gauges,Race Scoop/Trunions
DDS CVs,Carbon F DS/RPM L6/LPE 9.5 3.73/Pedders HD bushes,align kit
RB 2-piece rotors,S/S Lines,Hawk HPE Pads/Forgeline SP3P/Weld RTS
Ceramic ARH 2" LT/3" X-pipe,Corsa Touring/BMR TA,Toe,LCA,DS Loop
StreetSlayer BC3/MTI Shifter-Trans mt/Hotchkis CB/Monster CC/SJM LineLock
PFADT Coil Overs,Sways,Links,Mounts,SF Bushes,Camber Kit

LPE Brotherhood
.
Blue70SS is offline   Reply With Quote
 
Reply

Tags
650, blue70ss, ccotr, lingenfelter, lpe

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Speedster's SST Camaro Build Thread [COTW 9/13/10] speedster Member Car Journals 5756 06-21-2014 05:16 PM
Firefighter1 Build Thread [COTW 11/8/10] firefighter1 Member Car Journals 95 02-12-2013 09:00 PM
Lingenfelter 2010 Camaro Engine Packages - up to 800hp! Sizzox 5th Gen Camaro SS LS LT General Discussions 108 04-14-2010 08:09 PM
Lingenfelter 650 hp build mws444 Forced Induction - V8 546 12-26-2009 12:23 PM
My Lingenfelter Camaro Build Speed74SS Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 244 10-08-2009 11:00 PM


All times are GMT -5. The time now is 01:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.