Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Gen5DIY
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 02-19-2012, 08:10 PM   #1
TrekGTO

 
TrekGTO's Avatar
 
Drives: 05 GTO / JETTA TDI
Join Date: Jan 2012
Location: St Pete Fl
Posts: 423
AI Super Chiller Up Close

Here are some close up shots of the Camaro SS Super Chiller. Still need to get one on a Whipple. This one is for a KB but Maggie is the same as far as these pics cover. This is before insulating tape is put on cold fittings. Once taped up you canít see much.

Update:
Whipple Camaro, ZL1 and ZR1 now covered!
Also new custom AN O-ring Fittings used now not shown in these pictures.









Thie tube below is critical it canít be kinked or cracked; there is a gas inside that makes valve work. This valve is calibrated to work on Chiller. A lot of research (trial error) has gone into maximizing performance.



I also recalibrate the stock AC Valve when a Chiller is installed. Unfortunately on a KB you canít get to the stock AC Valve with blower installed. Itís almost impossible to get to AC charge port as well. That brings us to next pic.



This extra AC charge port is included for the KB. These have to be welded since they are not available for this size hose. This AC charge port is under car but itís still a lot better than the one behind Blower.

Last edited by TrekGTO; 07-29-2012 at 04:22 AM.
TrekGTO is offline   Reply With Quote
Old 02-19-2012, 08:16 PM   #2
TrekGTO

 
TrekGTO's Avatar
 
Drives: 05 GTO / JETTA TDI
Join Date: Jan 2012
Location: St Pete Fl
Posts: 423

This adapter is unique to Camaro its what lets you tap into AC as well as turn off Cabin AC on competition model. CNC billet with custom lines welded on. The smaller CNC billet adapter with fitting welded returns Freon to Factory AC. In all this allows Chiller installation without cutting any hoses or lines. Only some plastic parts have to be trimmed for installation and one hole drilled to mount a line. So this is completely reversible if you want to return to stock.




Last edited by TrekGTO; 02-20-2012 at 12:48 PM.
TrekGTO is offline   Reply With Quote
Old 02-19-2012, 08:36 PM   #3
B.Buster
 
B.Buster's Avatar
 
Drives: 2010 AquaBlue 2SS/RS
Join Date: Sep 2009
Location: Long Island
Posts: 343
It's a beautiful thing
B.Buster is offline   Reply With Quote
Old 02-19-2012, 09:13 PM   #4
TrekGTO

 
TrekGTO's Avatar
 
Drives: 05 GTO / JETTA TDI
Join Date: Jan 2012
Location: St Pete Fl
Posts: 423
Quote:
Originally Posted by B.Buster View Post
It's a beautiful thing
Knew I could count on you! This one is going out to EZ Speed on a referral from a shop that did an install. They convinced him his KB needed it as well as a larger heat exchanger. I donít agree with the larger heat exchanger but the chiller is a must.
I believe I have the install bug worked out you had with mount bracket reversed. I have made updates all along. On another front my GTO kit will soon be available as I finally have adapters in hand! GTO should have been first out.

I know itís a large purchase but I believe if people realized just how well these work I could pay my new shop rent LOL.
TrekGTO is offline   Reply With Quote
Old 02-20-2012, 06:59 AM   #5
NEGXXIS

 
NEGXXIS's Avatar
 
Drives: 2016 Camaro SS A8
Join Date: May 2009
Location: Anniston, Alabama
Posts: 765
Quote:
Originally Posted by TrekGTO View Post
Knew I could count on you! This one is going out to EZ Speed on a referral from a shop that did an install. They convinced him his KB needed it as well as a larger heat exchanger. I donít agree with the larger heat exchanger but the chiller is a must.
Thanks for posting the pics! I cant wait to get this on my SS.
It really was more my decision to upgrade to a larger heat exchanger, I ordered it before I ordered the Chiller...and almost canceled the order on the heat exchanger after I ordered the Chiller...then I thought well it couldnt hurt! and then I found another reason to swap to the other heat exchanger...the one that comes with the KB kit interfears with my ZL1 Front bumper cover I just installed last week..LOL

Thanks again !
__________________
2016 Camaro SS A8 White
2004 Chevy 2500HD Diesel - 601 rwhp / 1089 rwtq
SOLD - 2010 Camaro SS - Featured in GM High Tech Performance and Camaro Now Magazines - http://www.superchevy.com/features/g...of-perfection/
NEGXXIS is offline   Reply With Quote
Old 02-20-2012, 07:24 AM   #6
TrekGTO

 
TrekGTO's Avatar
 
Drives: 05 GTO / JETTA TDI
Join Date: Jan 2012
Location: St Pete Fl
Posts: 423
Quote:
Originally Posted by EZ SPEED View Post
Thanks for posting the pics! I cant wait to get this on my SS.
It really was more my decision to upgrade to a larger heat exchanger, I ordered it before I ordered the Chiller...and almost canceled the order on the heat exchanger after I ordered the Chiller...then I thought well it couldnt hurt! and then I found another reason to swap to the other heat exchanger...the one that comes with the KB kit interfears with my ZL1 Front bumper cover I just installed last week..LOL

Thanks again !
It looks like the Fog lights are at least as far apart as the SS. I hope your Chiller still fits with same mounting. This will be good to know for others.

Are the new H/E in and out ports similar to KBs? Here is a pic of a KB install I did. This is the diverter valve assembly, it comes with all the hoses installed long then cut other end to fit. Let me know before I ship so I can make changes if needed.


TrekGTO is offline   Reply With Quote
Old 02-20-2012, 09:08 AM   #7
NEGXXIS

 
NEGXXIS's Avatar
 
Drives: 2016 Camaro SS A8
Join Date: May 2009
Location: Anniston, Alabama
Posts: 765
I decided to cancel the order on the heat exchanger...dont think i will need it with the Chiller doing the work !!
__________________
2016 Camaro SS A8 White
2004 Chevy 2500HD Diesel - 601 rwhp / 1089 rwtq
SOLD - 2010 Camaro SS - Featured in GM High Tech Performance and Camaro Now Magazines - http://www.superchevy.com/features/g...of-perfection/

Last edited by NEGXXIS; 02-25-2012 at 09:01 AM.
NEGXXIS is offline   Reply With Quote
Old 02-20-2012, 12:20 PM   #8
Hendrix-Engineering
Account Suspended
 
Drives: First 9 inch-12 bolt IRS Camaro
Join Date: Jun 2009
Location: nc
Posts: 1,838
Quote:
Originally Posted by EZ SPEED View Post
Thanks for posting the pics! I cant wait to get this on my SS.
It really was more my decision to upgrade to a larger heat exchanger, I ordered it before I ordered the Chiller...and almost canceled the order on the heat exchanger after I ordered the Chiller...then I thought well it couldnt hurt! and then I found another reason to swap to the other heat exchanger...the one that comes with the KB kit interfears with my ZL1 Front bumper cover I just installed last week..LOL

Thanks again !
Looks GREAT!,can you pm me what you need for the zl1 front,lights harness etc and price thanks!
Hendrix-Engineering is offline   Reply With Quote
Old 02-25-2012, 02:59 PM   #9
bumblebeecamaro
Car Lover By Nature
 
Drives: Mini Cooper S
Join Date: Dec 2009
Location: Central FL
Posts: 2,302
I had Dave install my chiller a couple weeks ago and so far so good. I haven't had any issues. so far the chiller is doing its job.
__________________
bumblebeecamaro is offline   Reply With Quote
Old 02-27-2012, 06:55 AM   #10
NEGXXIS

 
NEGXXIS's Avatar
 
Drives: 2016 Camaro SS A8
Join Date: May 2009
Location: Anniston, Alabama
Posts: 765
My chiller we be arriving at my house tomorrow!!
__________________
2016 Camaro SS A8 White
2004 Chevy 2500HD Diesel - 601 rwhp / 1089 rwtq
SOLD - 2010 Camaro SS - Featured in GM High Tech Performance and Camaro Now Magazines - http://www.superchevy.com/features/g...of-perfection/
NEGXXIS is offline   Reply With Quote
Old 02-27-2012, 07:40 AM   #11
TrekGTO

 
TrekGTO's Avatar
 
Drives: 05 GTO / JETTA TDI
Join Date: Jan 2012
Location: St Pete Fl
Posts: 423
Quote:
Originally Posted by EZ SPEED View Post
My chiller we be arriving at my house tomorrow!!
You can reference pic above, you will need it LOL. On the KBs I installed I raised water pump a little for hoses to fit best. I think I drilled bracket and cut off extra. All the hoses are already assembled just reuse the short 90 coming off pump. A small screw is used to mount vacuum solenoid to existing holes in the spoke of fan shroud the relay mount pin fits existing hole in core support near battery

I know you will love it but let us know what you think about install, quality and performance. I normally recalibrate stock Valve but only way to do that on a KB is before itís installed or remove the KB to get to it. Remember Support is only a phone call away.
Thank you, Eric
TrekGTO is offline   Reply With Quote
Old 03-10-2012, 07:57 PM   #12
bumblebeecamaro
Car Lover By Nature
 
Drives: Mini Cooper S
Join Date: Dec 2009
Location: Central FL
Posts: 2,302
here's a pic of my chiller that Dave installed on my car about a month ago.

__________________
bumblebeecamaro is offline   Reply With Quote
Old 03-10-2012, 08:03 PM   #13
TrekGTO

 
TrekGTO's Avatar
 
Drives: 05 GTO / JETTA TDI
Join Date: Jan 2012
Location: St Pete Fl
Posts: 423
Quote:
Originally Posted by bumblebeecamaro View Post
here's a pic of my chiller that Dave installed on my car about a month ago.

I wish we had time to get more pics they really pop with that yellow.
Thanks PM sent
TrekGTO is offline   Reply With Quote
Old 03-12-2012, 12:10 PM   #14
NEGXXIS

 
NEGXXIS's Avatar
 
Drives: 2016 Camaro SS A8
Join Date: May 2009
Location: Anniston, Alabama
Posts: 765
I still havent found the time to install mine yet.
Been working on my step-dads 67 Chevy truck..installing a Vintage Air setup on it.
I have a car show this weekend and plan on installing the Chiller sometime soon after that.
__________________
2016 Camaro SS A8 White
2004 Chevy 2500HD Diesel - 601 rwhp / 1089 rwtq
SOLD - 2010 Camaro SS - Featured in GM High Tech Performance and Camaro Now Magazines - http://www.superchevy.com/features/g...of-perfection/
NEGXXIS is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Whiteside Customs Super Street 1 Package - Install Thread Whiteside Customs Suspension / Brakes / Chassis 5 12-12-2011 09:40 PM
Drag Racing..."Real Street Cars" Steve Dallas Dragstrip and Launch Techniques Discussion 40 09-04-2011 12:02 PM
Portable Dynamometer added to Houston Super Chevy Show Midway, Sept. 11-12 Houston Raceway USA - Texas 6 09-02-2010 12:26 AM
LG g6x3 or Super Charger Cam!!! Your Thoughts Mr. Brownstone Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 30 01-24-2010 02:45 PM
Shelby Super Snake KILLER74Z28 General Automotive + Other Cars Discussion 18 07-23-2007 08:12 PM


All times are GMT -5. The time now is 01:50 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.