New 2010-12 Camaro Front Splitter! ZL Inspired! Available Pre-Painted! Intro Sale! - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ssmike · 02-28-2012, 08:03 PM

Love the looks of this splitter! Very interested! Can you describe what gel coat fiberglass is? I worry about a fiberglass splitter cracking or breaking easier than a composite one. Also, how much ground clearance is lost with it installed over stock? I'm lowered 1 1/4". Thanks!

RPI Designs · 02-28-2012, 08:13 PM

Quote:

Originally Posted by ssmike

Love the looks of this splitter! Very interested! Can you describe what gel coat fiberglass is? I worry about a fiberglass splitter cracking or breaking easier than a composite one. Also, how much ground clearance is lost with it installed over stock? I'm lowered 1 1/4". Thanks!

Its the same material we have been making our front splitters and spoilers for Corvettes for the past twelve years. It's very durable fiberglass/plastic mix. These are more durable than ABS. The only way you crack this is if you try to drive over a concrete parking stop.

This will lower your front about 3/4". this splitter goes more "out" than "down".

The Camaro in the picture is my personal car. I love this splitter, best mod I have done yet.

Atlas · 02-28-2012, 08:16 PM

Need an SLP splitter unpainted for the SS, shipped to 93245. Got a price off your website that sounds good, just wanted to confirm with you. PM sent!

RPI Designs · 02-28-2012, 08:27 PM

Quote:

Originally Posted by Atlas

Need an SLP splitter unpainted for the SS, shipped to 93245. Got a price off your website that sounds good, just wanted to confirm with you. PM sent!

Replied, thanks for the PM.

RPI Designs · 02-28-2012, 08:32 PM

Quote:

Originally Posted by 2010camarolt

+1

austinjames · 02-28-2012, 08:36 PM

Quote:

Originally Posted by RPI Designs

Yes, sir. We'll add you to the LS list and let you know when LS is available. SS is in stock.

Perfect, thank you. Im really looking forward to this.

Buffnshine · 02-29-2012, 01:08 AM

Can you post a picture of this side by side with the SLP since you sell both. Also can you show the mounting Points

RPI Designs · 02-29-2012, 06:28 AM

Quote:

Originally Posted by austinjames

Perfect, thank you. Im really looking forward to this.

RPI Designs · 02-29-2012, 06:30 AM

Quote:

Originally Posted by Buffnshine

Can you post a picture of this side by side with the SLP since you sell both. Also can you show the mounting Points

I don't have a side by side pic. But the SLP is not as "aggressive". Our splitter is about 1/2" larger going straight out.

Our splitter mounts with 10 bolts, we provide.

Thanks!

aaronbv16 · 02-29-2012, 12:09 PM

Yes I was looking at the slp chin spoiler. i went to your page and i was looking for one matte black would that be possible? If so what is the price and im ready to buy. Just need to know how to do so

RPI Designs · 02-29-2012, 12:40 PM

Quote:

Originally Posted by aaronbv16

Yes I was looking at the slp chin spoiler. i went to your page and i was looking for one matte black would that be possible? If so what is the price and im ready to buy. Just need to know how to do so

Thanks, I just sent you a PM.

We have the ZL style splitter in matte black/flat black available right here: http://www.rpidesigns.com/shop/item.aspx?itemid=2050

We also have the SLP splitter, which is not really a matte/flat, it's more of a plastic shine, available here: http://www.rpidesigns.com/shop/item.aspx?itemid=2045

Thanks!

hrpiii · 02-29-2012, 02:51 PM

order placed.

RPI Designs · 02-29-2012, 02:57 PM

Quote:

Originally Posted by hrpiii

order placed.

Got it, thanks for the order! We'll paint this up and get it out to you as soon as we can.

When you get it installed, please snap a picture and post on here if you get a chance. We'd love to see it on your car!

Thanks again!

hrpiii · 02-29-2012, 03:01 PM

Quote:

Originally Posted by RPI Designs

Got it, thanks for the order! We'll paint this up and get it out to you as soon as we can.

When you get it installed, please snap a picture and post on here if you get a chance. We'd love to see it on your car!

Thanks again!

will do! and along the way of the installation because I know more want to know it ALL.

02-28-2012, 08:16 PM	#31
Atlas Would you kindly... Drives: Destitute Join Date: Aug 2010 Location: Clovis CA Posts: 748	Need an SLP splitter unpainted for the SS, shipped to 93245. Got a price off your website that sounds good, just wanted to confirm with you. PM sent! __________________

02-29-2012, 01:08 AM	#35
Buffnshine So Cal Camaro5 Race Team Drives: '10 SS/RS, '06 HHR, '70 El Camino Join Date: Sep 2009 Location: Huntington Beach, CA Posts: 2,600 View My Garage	Can you post a picture of this side by side with the SLP since you sell both. Also can you show the mounting Points __________________ TEAM L99 - So Cal Camaro5 Race Team #27 9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels

02-29-2012, 02:51 PM	#40
hrpiii AKA "Beefcake" Drives: CGM w/Black stripes Join Date: Oct 2009 Location: Indy Posts: 7,229	order placed. __________________ BMR Suspension, SLPTVS2300, GFORCE Driveshaft & HalfShafts, Kooks with cutouts and other fun things.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 09:27 PM
SEMA Show 2011 - New Camaro Products Showcase!	Sean@Phastek	Camaro Photos \| Spyshots \| Video \| Media Gallery	85	01-16-2012 10:51 PM

02-28-2012, 08:03 PM	#29
ssmike BliSSard has come! Drives: '16 Camaro 2SS, '13 Equinox CRT Join Date: Jul 2009 Location: Buffalo, NY Posts: 6,852	Love the looks of this splitter! Very interested! Can you describe what gel coat fiberglass is? I worry about a fiberglass splitter cracking or breaking easier than a composite one. Also, how much ground clearance is lost with it installed over stock? I'm lowered 1 1/4". Thanks!

02-29-2012, 12:09 PM	#38
aaronbv16 Aaronbv Drives: 2010 Camaro RS/SS Victory Red Join Date: Apr 2010 Location: Layton, Utah Posts: 77 View My Garage	Yes I was looking at the slp chin spoiler. i went to your page and i was looking for one matte black would that be possible? If so what is the price and im ready to buy. Just need to know how to do so