camaro strut bar bolts - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

camaroblack2324 · 04-05-2012, 09:27 PM

could somebody point me in the right direction for some oem strut bar bolts? tried my local dealer they told me the only strut bar there is for the camaro are the after market ones so no help from them, i got a part number but cant find any to purchase, thanks

camaroblack2324 · 04-08-2012, 05:57 PM

anybody?

Ventmaster · 04-08-2012, 06:08 PM

Are you referring to the 24mm retaining nut on top of the front struts, or a sway bar bolt (which is part of the endlink), or the 4 retaining bolts that hold up the rear shocks?

zkdreads · 04-08-2012, 06:51 PM

maureen from rodgers chevy will be able to sell you those oem bolts for the strut bar. i think there like $20 if im not mistaken. research strut bar and find those threads. i think the part numbers for those bolts are on the thread

NewDivide · 04-08-2012, 07:00 PM

Try part number 11589407; these are the bolts for the strut tower brace I think you're referring too?

camaroblack2324 · 04-08-2012, 09:09 PM

ok thanks guys, my local chevy dealer were no help at all

Comrando · 04-08-2012, 11:02 PM

They would have to look up a convertible.

camaroblack2324 · 04-08-2012, 11:19 PM

they didnt even know the new camaro verts had a oem strut bar and told me it was only offered as an after market item

toml_pa · 04-09-2012, 09:21 AM

Quote:

Originally Posted by NewDivide

Try part number 11589407; these are the bolts for the strut tower brace I think you're referring too?

Correct.
M8 X 1.25 X 35mm (6): 11589407
GM MSRP $4.48 each OUCH! Might want to try Ace
Torque to 18 ft/lbs or 216 in/lbs

SSMickey · 04-09-2012, 09:50 AM

Quote:

Originally Posted by camaroblack2324

they didnt even know the new camaro verts had a oem strut bar and told me it was only offered as an after market item

But mine is too. Maureen at Rodgers Chevrolet FTW!

bannonm · 04-09-2012, 12:44 PM

Quote:

Originally Posted by toml_pa

Correct.
M8 X 1.25 X 35mm (6): 11589407
GM MSRP $4.48 each OUCH! Might want to try Ace
Torque to 18 ft/lbs or 216 in/lbs

$4.48. Wow, are they chromed too? And the crappy part, even if you order them online discounted the shipping will cost almost as much as the 6 bolts. I bought new caliper bolts and the shipping cost $12 which is what the 8 bolts cost.

AKA-22 · 06-22-2012, 03:39 PM

good info...

AKA-22 · 06-24-2012, 03:00 PM

Quote:

Originally Posted by bannonm

$4.48. Wow, are they chromed too? And the crappy part, even if you order them online discounted the shipping will cost almost as much as the 6 bolts. I bought new caliper bolts and the shipping cost $12 which is what the 8 bolts cost.

would these work http://www.ebay.com/itm/M8-1-25-x-35...ht_2542wt_1163

04-05-2012, 09:27 PM	#1
camaroblack2324 Drives: 2011 black 1ss Join Date: Jan 2011 Location: texas Posts: 35	camaro strut bar bolts could somebody point me in the right direction for some oem strut bar bolts? tried my local dealer they told me the only strut bar there is for the camaro are the after market ones so no help from them, i got a part number but cant find any to purchase, thanks

04-08-2012, 06:08 PM	#3
Ventmaster Drives: 2010 Camaro RS 1LT M6 Join Date: Jan 2011 Location: Utah Posts: 1,076	Are you referring to the 24mm retaining nut on top of the front struts, or a sway bar bolt (which is part of the endlink), or the 4 retaining bolts that hold up the rear shocks? __________________ Airaid CAI, Rx ported TB, Mace ported IM, JBA shorty headers, Richmond 3.73, Borla touring axleback, Hurst short throw, NH-SS fix, IDEALG clutch m/c, SS struts/springs, Spohn trailing arms, Pfadt Racing sways, Pedders radius arm & rear subframe bushing inserts, 2LT gauge pkg.TSW Nurburgs. IPF S/C

04-08-2012, 06:51 PM	#4
zkdreads Drives: 2010 Camaro LS V6 Join Date: Jul 2010 Location: Tampa, Florida Posts: 2,418	maureen from rodgers chevy will be able to sell you those oem bolts for the strut bar. i think there like $20 if im not mistaken. research strut bar and find those threads. i think the part numbers for those bolts are on the thread __________________ C-LO or Sonic "Without Struggle there is no progress" I am your best nightmare!

04-08-2012, 07:00 PM	#5
NewDivide NewDivide Drives: SW '11 2LT/RS & '12 Honda CRV Join Date: Jan 2011 Location: South East, Mass Posts: 522 View My Garage	Try part number 11589407; these are the bolts for the strut tower brace I think you're referring too? __________________

04-08-2012, 11:02 PM	#7
Comrando SScalator Drives: '11 CGM LS3 Join Date: Mar 2011 Location: Chicagoland Posts: 4,694 View My Garage	They would have to look up a convertible. __________________ Give me fuel. Give me fire. Give me that which I desire.

04-08-2012, 05:57 PM	#2
camaroblack2324 Drives: 2011 black 1ss Join Date: Jan 2011 Location: texas Posts: 35	anybody?

04-08-2012, 09:09 PM	#6
camaroblack2324 Drives: 2011 black 1ss Join Date: Jan 2011 Location: texas Posts: 35	ok thanks guys, my local chevy dealer were no help at all

04-08-2012, 11:19 PM	#8
camaroblack2324 Drives: 2011 black 1ss Join Date: Jan 2011 Location: texas Posts: 35	they didnt even know the new camaro verts had a oem strut bar and told me it was only offered as an after market item

06-22-2012, 03:39 PM	#12
AKA-22 Drives: Ellie-1 Join Date: Jul 2011 Location: Farmington ,mo Posts: 702	good info... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Does the v6 have enough power?	cstproductions	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	305	08-29-2012 09:27 PM
SEMA Show 2011 - New Camaro Products Showcase!	Sean@Phastek	Camaro Photos \| Spyshots \| Video \| Media Gallery	85	01-16-2012 10:51 PM
CAMARO 1998 RED CUSTOM MADE, LEATHER, DVD, CAMERA, NEON	kachyok	Autos For Sale / Wanted	0	05-23-2010 10:47 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Pedders Suspension Benchmark Track Testing and New Jersey Track Day	Info@PeddersUSA.com	USA - NY / NJ / PA	35	10-26-2009 05:20 PM