Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
horizon670
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8

Forced Induction - V8 V8 Supercharger, turbo, nitrous discussions

Reply
 
Thread Tools
Old 05-12-2009, 08:46 AM   #26
Twin Screw
 
Drives: Anything with Twin Screw
Join Date: May 2009
Location: california
Posts: 16
The corveette LS3 should be released with data/dyno very soon. Currently Techco is in process of bringing in some Camaro's. There should be a release soon.
Twin Screw is offline   Reply With Quote
Old 06-02-2009, 11:43 AM   #27
SCREWED
 
Drives: MZ DAIZY!!
Join Date: May 2009
Location: So Cal
Posts: 39
Quote:
Originally Posted by pharmd View Post
Retail MSRP is suppose to be $7500 complete...FYI...they can correct me if I'm wrong.

Suppose to have Vette LS3 dyno #'s very soon...I talked with them last week.
Quote:
Originally Posted by Twin Screw View Post
The corvette LS3 should be released with data/dyno very soon. Currently Techco is in process of bringing in some Camaro's. There should be a release soon.
I found this vid this morning. It appears that their Gen5 kit would be similar to this. . . Also, it looks like the LS3 kit is gonna be around $8500 from what I read on the Vette forum.

SCREWED is offline   Reply With Quote
Old 06-02-2009, 01:20 PM   #28
Ninjak
Banned
 
Drives: 08 GT Mustang | 65 GT Notchbac
Join Date: May 2009
Location: Miami Florida
Posts: 819
Techco is a solid company filled with X Saleen guys, they know there stuff. The Techco blower for the GT is a beast. There is a GT running low 11's with it.

For some GT guys/gals, the price of at 7999k was a bit stiff, but I will say that the kit is very complete. Plus you have to remember that Stang owners have a very wide choice of blowers that can come in under 5k. Like to see the Challenger with the Techco kit on it. When will you be at Towers next ? You guys park pretty close to the stang section
Ninjak is offline   Reply With Quote
Old 06-03-2009, 12:39 AM   #29
gotpball44
Boost Is Your Friend
 
gotpball44's Avatar
 
Drives: 2010 Black 1SS Camaro
Join Date: Oct 2008
Location: La Mirada CA
Posts: 1,173
Send a message via AIM to gotpball44
Yes they are doing a supercharger for the Camaro.
I know this because they are using my car for the R&D.
gotpball44 is offline   Reply With Quote
Old 06-03-2009, 09:08 AM   #30
SCREWED
 
Drives: MZ DAIZY!!
Join Date: May 2009
Location: So Cal
Posts: 39
Congrats gotpball44!! Let us all know how that turns out!! Ninjak, I think the blower is a little less than what you quoted.
SCREWED is offline   Reply With Quote
Old 06-03-2009, 10:21 AM   #31
Ninjak
Banned
 
Drives: 08 GT Mustang | 65 GT Notchbac
Join Date: May 2009
Location: Miami Florida
Posts: 819
Hmm maybe..I'll find it on the Stang forums.
Here is one..

Quote:
This is from the break into May sale. TECHCO SUPERCHARGER RETAILS $7500.00
-INSTALLATION OF SUPERCHARGER
-DYNO BEFORE
-DYNO AFTER
-DIABLO TUNE
-VIDEO/PICS OF BUILD
INSTALLATIONS SAVINGS $1250.00 PLUS DYNO TIME
Ahh I found one of the installers on this. Think this is when it was introduced.

Tillman's Speed shop.
Quote:
For those of you who are interested in the new Techco superchargers, we thought we'd post some interesting videos. Keep in mind we're taking preorders right now at the intro pricing of $6995! After the first 100 kits, these systems will go back up to the retail price of $7495! Call Tillman Speed today to get in line!
So 7500 basically. So yeah I was a bit off.
Ninjak is offline   Reply With Quote
Old 06-03-2009, 10:24 AM   #32
SCREWED
 
Drives: MZ DAIZY!!
Join Date: May 2009
Location: So Cal
Posts: 39
No worries ninjak. . . that looks about what I saw. I think that price is for Mopar/Mustang. LS3 kit may be different??
SCREWED is offline   Reply With Quote
Old 06-03-2009, 10:44 AM   #33
Ninjak
Banned
 
Drives: 08 GT Mustang | 65 GT Notchbac
Join Date: May 2009
Location: Miami Florida
Posts: 819
Perhaps. Depends though I guess. Where the GM parts come in and how much they will cost.

In truth, that break into may sale was pretty nice. 7500 for the install and tune...not bad at all really.

I have a Supershaker because I was using a CDC hood before. But heh luv my Supershaker..I always like the concept of a functional hood scoop.
Ninjak is offline   Reply With Quote
Old 06-04-2009, 11:07 PM   #34
Tillman Speed
 
Drives: 2010 Camaros
Join Date: Jun 2009
Location: Aston, PA
Posts: 47
Send a message via AIM to Tillman Speed
Hello! Out of respect for the forums, I will only post once and then look into vendor sponsorship, or duck out!

I just saw this and wanted to clarify. The price of the Camaro system should be very similar to the Ford and Dodge pricing that is out now. The final price has not been released but I think they were shooting in the ballpark of hopefully 7500 dollars for the system plus installation and tuning.

For those of you who don't know us, we're very big in the EFI world. We do a ton of Mustangs, Shelby GT500s, Lightnings, Cobras and have also started to break into the world of Challengers, Chargers, etc.

We have recently ventured into the GM side with G8 GT, GTO and numerous Z06's both installs and tuning coming through our shop and on our in-house Dynojet 224xLC. We will be very happy to add the 2010 Camaro platform to our supported vehicles!

If anyone has absolutely any questions about the TECHCO line of products for the 2010 Camaro, please feel free to give us a shout and we will update you at any point!

TECHCO's units are modular and very easy to redesign for multiple applications. What does this mean for you? It will not take years for them to get this into production! They are working on the Jeep SRT8 right now, and then they roll out the Camaro/Corvette chargers! They use front FEAD drive's that have absolutely zero belt slip issues! They have supercharger snout braces, and are made of T6061 billet aluminum and 8 rib. Everything that you purchase from TECHCO will be made in house, even the screws! And the whine... oh they whine!!!

We offer full turn-key solutions from start to finish and have the ability to dyno your car when it rolls in the shop, and just before it leaves! This way you can see exactly how much your trip to Tillman Speed Inc. was worth!

Thanks again! And moderators, have no fear... this will be my last post until I find out sponsorship options! Good day!

Chris Rose
Tillman Speed Inc.
www.shoptillman.com

Last edited by Tillman Speed; 06-05-2009 at 12:41 PM.
Tillman Speed is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
V8 Camaro Performance Upgrades List Milk 1027 Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 85 11-11-2013 12:48 PM
Twin Screw supercharger or no?? ironpeddler Forced Induction - V8 4 06-02-2009 04:36 PM


All times are GMT -5. The time now is 08:02 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.