Roto-Fab Cold Air Intake Systems Available At APEX Motorsports!!!!!!!!!!!!!!!

[Apex Chase]

Starting at $349.95 SHIPPED!!!

Scoop and APEX washer bottle replacement kit packages now available!!

Roto-fab's 2010-11 Camaro CAI for your V8 equipped Camaro.

• Air Box custom made to keep engine/radiator heat away from your filter.
• Molded air box adapter tube incorporates the MAF (mass air flow) sensor.
• Large 6" filter mounting flange.
• Inlet elbow available in cross link poly (plastic), polished or painted stainless steel or with carbon fiber hydragraphics finish
• High quality silicone hoses available in a variety of colors.
• Air Box available in a variety of colors.
• Installs easily using factory mounting points.
• Doesn't set any codes/ no tuning required.
• Oil or dry filter available.

The price above includes black plastic tube, black hoses, high gloss black air box, and oiled air filter. Air boxes can be custom painted any color. The powder coat finish is durable and provides a close color match however varies slightly from run to run. Also the surface isn’t quite as smooth as the automotive finish. Please allow at least 1-2 week lead time for automotive painted finishes.

[Apex Chase]

Here is a post made by Camaro5 member Darth Emma after she installed the Apex Washer Tank Replacement Kit on her Roto-Fab equipped Camaro SS.

Originally Posted by Darth_Emma

I installed the washer bottle, scoop, and heritage grill today. If I may offer a few bits of advice to those putting on the washer bottle.

1) Mount the fill tube piece INSIDE your intake. If you mount it outside the intake box, there is no easy way to route the fill tube to the washer bottle because the bottle is directly below the intake. Here is where I put it:


We put the fill tube inside the intake in front of the filter. We had to be careful where we mounted it so that the bolts and nuts wouldn't touch the air conditioner lines outside the air box. So we took the intake box out of the car, drilled the holes, and mounted the fill tube with the bolt heads toward the AC lines and the nuts inside the air box. That way, the bolts didn't touch the AC lines.



2) As it says in the instructions, mount the bottle as far back on the scoop as you can like I did in this picture. If it had been any further forward, then it would hit the DRL light recess on the front bumper.



3) You don't really have to cut the little nub off the pump. It would fit in the washer bottle recess just fine with the nub on.

Thanks to Apex for a great kit! It work perfectly.

[RANGERGOD]

Don't mind if I do!

[Apex Chase]

Originally Posted by RANGERGOD

Don't mind if I do!

Thanks for your order and your service.

[Andy@AMSOIL]

Is the blue filter an AMSOIL filter

[Apex Chase]

Scoop and APEX washer bottle replacement kit packages now available!!

A day early but...

[Apex Chase]

Thanks to everyone that stopped by the APEX tent at Camaro5Fest!

[Apex Chase]

The weekend is almost here! Be sure to place your orders before it sneaks up on us.