New from RPI Designs! Pre-Painted Interior Door Panel Inserts! All Colors Available!

[Xedes]

[RPI Designs]

Originally Posted by Xedes

Hello?

[Kronix]

Originally Posted by RPI Designs

Hello?

He must be waiting for the ABL panels like most of us........

[Kronix]

Any word on the panels with ABL yet? I was looking at my panels with the ABL and if I'm not mistaken, wouldn't you just have to mask the edges of the panel & dash strips before you paint then in order for the ABL to show though?

[SummoneR]

Originally Posted by Kronix

Any word on the panels with ABL yet? I was looking at my panels with the ABL and if I'm not mistaken, wouldn't you just have to mask the edges of the panel & dash strips before you paint then in order for the ABL to show though?

Yup, that's what most people are doing. The dash pieces don't the top edge to be taped off. Even with the ABL dash DIY mod because its a gap that allows the light to shine.

I wish there was a way to remove the existing color and paint them from the back like the factory panels are. It would look better IMO. Or at least be able to buy clear unpainted pieces.

[Kronix]

Originally Posted by SummoneR

Yup, that's what most people are doing. The dash pieces don't the top edge to be taped off. Even with the ABL dash DIY mod because its a gap that allows the light to shine.

I wish there was a way to remove the existing color and paint them from the back like the factory panels are. It would look better IMO. Or at least be able to buy clear unpainted pieces.

I didn't know that about the dash strips, thanks for the 411 Paul. I agree about being able to paint from the back, that would elevate any sort of scratches too. I definitely want to do my strip & panels black, but want to keep the ABL...I'll hold off a little longer, see what someone comes up with, if not just another project for River City Creations to do for me.

[SummoneR]

Originally Posted by Kronix

I didn't know that about the dash strips, thanks for the 411 Paul. I agree about being able to paint from the back, that would elevate any sort of scratches too. I definitely want to do my strip & panels black, but want to keep the ABL...I'll hold off a little longer, see what someone comes up with, if not just another project for River City Creations to do for me.

Yes sir. no problem. The dash can be done multiple ways, some sand the back to allow the light through others allow for a tiny gap.

The only problem I see with taping along the top of the door panels is that you may be able to see the silver color of the panel through the top clear portion, it may need to be sanded off of the back of the panel in order to prevent this. Easy fix. It's too bad RPI can't get clear panels from Gm and paint the back then attach the clip strip along the back of the dash panels. That would be awesome. Maybe they can negotiate a deal with GM for a large quantity deal.

[Drottie]

Wanting a set in VR once the ABL thing is figured out.....

[Ldavis6891]

Would you be able to match the stock steering wheel and gauges, I believe there the switchblade silver? Basically can u make the original inserts that would come with a 2ss?

[Disco69]

Any word on getting the ABL to work?

[Infinite-T]

Originally Posted by Disco69

Any word on getting the ABL to work?

They would have to get a completely different part. The ones they currently sell are 3rd party re-creations made from a mold out of black fibreglass, then painted on the front. As they are, there would be no way to get them to work with ABL. They are not a very good fit either.

I really wish they would be available from GM again. I would really like to finish my project.

[RPI Designs]

Originally Posted by Kronix

He must be waiting for the ABL panels like most of us........

These are a bit more of a project than we thought at first. We have over $8000.00 in tooling cost, so it will happen, just getting them right.

Thanks!

[SummoneR]

FYI Everyone who has been waiting.

ABL is now available.

http://www.camaro5.com/forums/showthread.php?t=236313

Originally Posted by RPI Designs

2010-2013 Camaro Pre-Painted Interior Door & Dash Panel Inserts - Compatible with ABL Doors!

We have been working hard to product these 2010-2013 Camaro Door Panels that will work with you guys/gals that have Ambient (ABL) lighting in your doors. These are in stock, ready to be painted your color.

These door panels are made for cars with ABL lighting (ambient lighting)

Would you like to match your door and dash panels to the exterior paint on your Camaro? Our fiberglass door panel inserts actually replace your oem pieces. Simply remove your stock door panel and replace with these. These are sold in a set, one passenger Camaro door panel insert and one driver Camaro door panel insert. Designed for cars with ABLS (amibent lighting in your doors).

Our dash panel inserts are GM pieces that we take brand new and paint your exterior body color.

Please select color option below. These are custom painted to order so please allow 5-10 business days from order to ship.

Available here: http://www.rpidesigns.com/shop/item.aspx?itemid=2084

Retail price: $389.95 /set
Forum price: $350.96 /set (coupon code CAMARO5 at checkout)

[Rabamaro]

How can we get these to work in a 1SS?

[SummoneR]

Originally Posted by Rabamaro

How can we get these to work in a 1SS?

There is a DIY thread or two about adding it to cars that do not have it, probably from 2SSRS (Ofer)

[RPI Designs]

Originally Posted by SummoneR

There is a DIY thread or two about adding it to cars that do not have it, probably from 2SSRS (Ofer)

[RPI Designs]

Thank you for the orders!

[RPI Designs]

Just a reminder for May. Thank you!