Need some help! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CWI · 05-06-2012, 11:18 AM

I remember seeing on here some time back, a Camaro that had lights projecting from under the door and projecting CAMARO onto the ground below.
I am doing something similar but just using some CCFL in the bottom of the door panel. I want them to come on with the dome light.
Does anyone know the link to that thread or a thread on how to get the power through the flex conduit to the door? If you do, please PM it to me? Any help would be nice, Thanks
This should be in the mods section I know, but want to get some exposure with this question before it gets moved as there are usually only a handful of people on the lighting mods subforums.

kjkjr27 · 05-06-2012, 11:40 AM

Try checking out the DIY section

CWI · 05-06-2012, 01:23 PM

Quote:

Originally Posted by kjkjr27

Try checking out the DIY section

I looked around there and did a few searches, couldn't find anything. I know i've seen the subject about getting power thru the door a couple times.

2SSRS · 05-06-2012, 11:16 PM

I PM you call me we can get it done.

CWI · 05-07-2012, 12:45 AM

Thanks for the phone shout out Ofer. Finishing the door panels tonight and will make the tie ins in the kick panels tomorrow. Was going to do it all tonight but don't want the skeeters to carry me away. Wish I had a garage. Maybe later this year.

05-06-2012, 11:18 AM	#1
CWI Helping Build America Drives: 2010 2SS/RS,LS3 2006 Colorado Join Date: Aug 2008 Location: Nationwide Posts: 3,533 View My Garage	Need some help! I remember seeing on here some time back, a Camaro that had lights projecting from under the door and projecting CAMARO onto the ground below. I am doing something similar but just using some CCFL in the bottom of the door panel. I want them to come on with the dome light. Does anyone know the link to that thread or a thread on how to get the power through the flex conduit to the door? If you do, please PM it to me? Any help would be nice, Thanks This should be in the mods section I know, but want to get some exposure with this question before it gets moved as there are usually only a handful of people on the lighting mods subforums. __________________ Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "Holy shit, what a ride!"

05-06-2012, 11:40 AM	#2
kjkjr27 Drives: 2011 2LT/RS Camaro IOM Join Date: Jan 2012 Location: Syracuse Posts: 2,990	Try checking out the DIY section __________________ Roto-fab CAI \| Apex Scoop & Washer Relocator\| Vmax Ported Throttle Body\|Rx Black Ice-olator \|Trifecta Tuned \| MRT V2 with LS3 mid-pipe \| Rx Catch can and Breather \| Mace Stage 3 Ported IM \| Plenum Spacer\|TSW Nurburgring 20x10\|Matte Black NS-1\|R1 Concept Slotted/Drilled Rotors\| My Build Thread:

05-06-2012, 11:16 PM	#4
2SSRS On a list for a 2014 Z28 Drives: 2010 Camaro 2SS M6 Join Date: Oct 2008 Location: By the lake in AZ Posts: 10,122 View My Garage	I PM you call me we can get it done. __________________ My Build Thread E-mail Amigoop3@yahoo.com

05-07-2012, 12:45 AM	#5
CWI Helping Build America Drives: 2010 2SS/RS,LS3 2006 Colorado Join Date: Aug 2008 Location: Nationwide Posts: 3,533 View My Garage	Thanks for the phone shout out Ofer. Finishing the door panels tonight and will make the tie ins in the kick panels tomorrow. Was going to do it all tonight but don't want the skeeters to carry me away. Wish I had a garage. Maybe later this year. __________________ Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "Holy shit, what a ride!"