TSW Nurburgring Photo Thread.... - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

skar · 05-14-2012, 10:02 AM

Not a lot out there in street tires in the 305-35-20 with out paying big bucks!

rtcat600man · 05-14-2012, 10:10 AM

Quote:

Originally Posted by skar

Not a lot out there in street tires in the 305-35-20 with out paying big bucks!

go with the 315/35/20 continentals ?

skar · 05-14-2012, 10:18 AM

? On 10" Mike from what i see you need a 10.5 wheel.

rtcat600man · 05-14-2012, 11:10 AM

Can it be done? Just a matter of how much you want to push the envelope. Wheel and tire experts will say no you shouldn't do it. But then again we shouldn't put 305 drag radials on the 9" wheel but seems like many have done that too. I am not saying it is right or wrong, just saying I know I have seen others have done it.

skar · 05-14-2012, 11:20 AM

No I cant do it. I will stick with the high dollar 305 on 10"
or go to the f14 on a 10.5 with the 315"s I would like to see
the f14's . I like the TWS you ordered they also have a better
color choice and better bang for the buck over the f14's

RedDragonSS · 05-15-2012, 10:48 PM

Keep them coming.. I know there are more of us out there running these wheels...
Didnt have a chance to get better pictures yet, been raining none stop in the afternoons down in miami the past few days...

Erik@Torq · 05-16-2012, 10:44 AM

Quote:

Originally Posted by ModBargains.com

That set?

Fronts are easily going to be the 20x9 ET20 fitment probably running a 275 up there as well. As for the rears, offset should be the 20x10 ET35, probably running a 305 back there as well (or something similar). Tires on there are Toyo R888's which run wider than normal just FYI.

The Toyo R888's are only available in 315/30-20 or 285/35-20, I would assume that is what he is running on those rims. Considering the buldge on the tire I would assume those are the 10's and 9's. On a side note those are awesome tires, run through 3 sets on my SS and have another set coming info for the ZL1

Quote:

Originally Posted by RedDragonSS

Keep them coming.. I know there are more of us out there running these wheels...
Didnt have a chance to get better pictures yet, been raining none stop in the afternoons down in miami the past few days...

And they look AWESOME in real life buddy, good job!

/Erik

grocerygetter · 05-16-2012, 03:49 PM

that toyo 285 on a 10" rim would have been the money maker.

Speed Depot · 05-16-2012, 11:39 PM

[QUOTE=skar;4940063]I like it . on a stock SS can i go with a wide 305/35-20 = 28.4" tall" wheel . Will the fender tire gap be to big in rear.(10' nurburing) and what size to up front.[/

Yes, you can run a 305/35/20 and the fender gap will not be to big. A 275/40/20 is perfect for the front.

jtmiller92 · 05-18-2012, 12:27 PM

Here's my set up for the track. Hope to try them out tonight.

Front: 18x8 Nitto NT555 265/50/18
Rear: 18x9.5 305/45/18 NT05R Drag radials.

RedDragonSS · 05-19-2012, 10:12 PM

Quote:

Originally Posted by jtmiller92

Here's my set up for the track. Hope to try them out tonight.

Front: 18x8 Nitto NT555 265/50/18
Rear: 18x9.5 305/45/18 NT05R Drag radials.

Sweet looking wheels, How did it go at the track?

rtcat600man · 05-19-2012, 10:59 PM

New TSW's arrived and I put them on a few minutes later. Total weight savings of just over 20 lbs. Little over 5lbs per corner.

LOVE EM.

Went up to Woodward to show them off. Good thing I went too with my Camera. A ZL1 Vert showed up tonight too.

http://www.camaro5.com/forums/showth...=1#post4990911

RedDragonSS · 05-21-2012, 01:33 PM

Quote:

Originally Posted by rtcat600man

New TSW's arrived and I put them on a few minutes later. Total weight savings of just over 20 lbs. Little over 5lbs per corner.

LOVE EM.

Went up to Woodward to show them off. Good thing I went too with my Camera. A ZL1 Vert showed up tonight too.

http://www.camaro5.com/forums/showth...=1#post4990911

Wow the car looks awesome!!! congrats

skar · 05-21-2012, 02:51 PM

Sharp Mike!

Dan2510 · 05-21-2012, 06:06 PM

Quote:

Originally Posted by rtcat600man

New TSW's arrived and I put them on a few minutes later. Total weight savings of just over 20 lbs. Little over 5lbs per corner.

LOVE EM.

Went up to Woodward to show them off. Good thing I went too with my Camera. A ZL1 Vert showed up tonight too.

http://www.camaro5.com/forums/showth...=1#post4990911

Sweet! What size rims and tired did you go with?

rtcat600man · 05-21-2012, 06:48 PM

Quote:

Originally Posted by RedDragonSS

Wow the car looks awesome!!! congrats

Thank - you.......

Quote:

Originally Posted by skar

Sharp Mike!

Thank - you Les..........

Quote:

Originally Posted by Dan2510

Sweet! What size rims and tired did you go with?

Wheels are 20 X 9

Tires are 275/40/20

bannonm · 05-23-2012, 11:34 AM

Anyone running 20x10's all around? And with what tire? I'm looking for a decent track combination to get quickly.

RedDragonSS · 05-24-2012, 12:06 AM

Quote:

Originally Posted by bannonm

Anyone running 20x10's all around? And with what tire? I'm looking for a decent track combination to get quickly.

Blackkaz04 · 05-24-2012, 01:12 AM

is that the sandias mountains in the back ground.....Albuquerque NM?

Quote:

Originally Posted by AngelSpeedFreak

22"s

RedDragonSS · 05-27-2012, 11:09 PM

SGOS252382 · 05-28-2012, 03:44 PM

Quote:

Originally Posted by skar

Nice is it lowered

Sorry I missed this. No my car is not lowered. I've considered it, and I've been on the fence about getting some. But guys seriously into drag racing have told me to stay away from them. Some guys have even taken off their lowering springs to improve launch characteristics.
But Padre proves you can still pull great 60' times with lowering springs (1.5 sec 60' and he runs 1" BMR lowering springs).

tones2SS · 05-28-2012, 08:32 PM

Quote:

Originally Posted by RedDragonSS

Wow,....great stance.
No rubbing at all? What is your suspension set up please. Thanks!

RedDragonSS · 05-28-2012, 10:04 PM

Quote:

Originally Posted by tones2SS

Wow,....great stance.
No rubbing at all? What is your suspension set up please. Thanks!

I am running the Eibach pro kit (1" drop all around)... Those are 22 inch wheels that were for a photoshoot for best wheel deals.. 265/35/22 up front and 295/30/22 in the rears.. The car looked awesome on the 22's but performance took a toll... No rubbing at all with that setup....

2010txss · 05-30-2012, 11:45 AM

Just got some.

RedDragonSS · 05-30-2012, 06:21 PM

Looks Sweet 2010txss.... I like the polished look on the silver...

Congrats.....

05-14-2012, 10:02 AM	#51
skar Drives: 2010 2SSRS headers/CAI/tune/corsa, Join Date: May 2010 Location: Commerce twp Michigan Posts: 1,277	Not a lot out there in street tires in the 305-35-20 with out paying big bucks! __________________ Stainless works headers/cats Roto fab CAI / Corsa and install and tune Livernois TSW Nuburgring 9 &10" x20 on Invos JL Audio XD400/4 amp Pfadt trailing arms & tie rods sway bars. pedders street 1 package

05-14-2012, 10:18 AM	#53
skar Drives: 2010 2SSRS headers/CAI/tune/corsa, Join Date: May 2010 Location: Commerce twp Michigan Posts: 1,277	? On 10" Mike from what i see you need a 10.5 wheel. __________________ Stainless works headers/cats Roto fab CAI / Corsa and install and tune Livernois TSW Nuburgring 9 &10" x20 on Invos JL Audio XD400/4 amp Pfadt trailing arms & tie rods sway bars. pedders street 1 package

05-14-2012, 11:10 AM	#54
rtcat600man having FUN now Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 6,262 View My Garage	Can it be done? Just a matter of how much you want to push the envelope. Wheel and tire experts will say no you shouldn't do it. But then again we shouldn't put 305 drag radials on the 9" wheel but seems like many have done that too. I am not saying it is right or wrong, just saying I know I have seen others have done it. __________________ MY BUILD

05-14-2012, 11:20 AM	#55
skar Drives: 2010 2SSRS headers/CAI/tune/corsa, Join Date: May 2010 Location: Commerce twp Michigan Posts: 1,277	No I cant do it. I will stick with the high dollar 305 on 10" or go to the f14 on a 10.5 with the 315"s I would like to see the f14's . I like the TWS you ordered they also have a better color choice and better bang for the buck over the f14's __________________ Stainless works headers/cats Roto fab CAI / Corsa and install and tune Livernois TSW Nuburgring 9 &10" x20 on Invos JL Audio XD400/4 amp Pfadt trailing arms & tie rods sway bars. pedders street 1 package

05-15-2012, 10:48 PM	#56
RedDragonSS TRI-COUNTY CAMAROS Drives: Red Camaro 2SS Join Date: Jan 2011 Location: Miami,FL Posts: 6,339 View My Garage	Keep them coming.. I know there are more of us out there running these wheels... Didnt have a chance to get better pictures yet, been raining none stop in the afternoons down in miami the past few days... __________________

05-16-2012, 03:49 PM	#58
grocerygetter Drives: 2010 SS (2ss/rs, auto, SW/IOstripe) Join Date: Jan 2010 Location: 72034 Posts: 2,078 View My Garage	that toyo 285 on a 10" rim would have been the money maker. __________________ -John S. 2010 Camaro 2ss/rs-a few cosmetic things, Pfadt stage 2 plus rear arm package, LG chassis brace, Vortech, ADM fpcm/ZL1 pump, Lingenfelter 3.70 gears, JBA catless, ProTorque 3200, 18" TSW N'rings for drag duty, 20" Forgestar F14s for street. Thanks to: Jannetty Racing, dv8motoring, Gwatney Chevrolet/GPI Jacksonville AR, TCAudio in Benton AR 2012 4Runner -daily driver

05-16-2012, 11:39 PM	#59
Speed Depot Drives: 2010 Camaro Join Date: Nov 2009 Location: Ft. Lauderdale, Florida Posts: 1,442	[QUOTE=skar;4940063]I like it . on a stock SS can i go with a wide 305/35-20 = 28.4" tall" wheel . Will the fender tire gap be to big in rear.(10' nurburing) and what size to up front.[/ Yes, you can run a 305/35/20 and the fender gap will not be to big. A 275/40/20 is perfect for the front.

05-18-2012, 12:27 PM	#60
jtmiller92 Drives: 2011 1SS Camaro Join Date: Mar 2010 Location: Nicholasville, KY Posts: 217	Here's my set up for the track. Hope to try them out tonight. Front: 18x8 Nitto NT555 265/50/18 Rear: 18x9.5 305/45/18 NT05R Drag radials. __________________ 2011 Camaro 1SS LS3/TR6060,TSP 229/236, Kooks Headers/HF Cats, Flowmaster AT, Rotofab CAI, VMAX TB, Pulley,(464rwhp)12.39 @ 115 Last edited by jtmiller92; 05-18-2012 at 12:56 PM.

05-19-2012, 10:59 PM	#62
rtcat600man having FUN now Drives: 2010 2LT IOM Join Date: Nov 2009 Location: Clarkston, Michigan Posts: 6,262 View My Garage	New TSW's arrived and I put them on a few minutes later. Total weight savings of just over 20 lbs. Little over 5lbs per corner. LOVE EM. Went up to Woodward to show them off. Good thing I went too with my Camera. A ZL1 Vert showed up tonight too. http://www.camaro5.com/forums/showth...=1#post4990911 Attached Images __________________ MY BUILD

05-21-2012, 02:51 PM	#64
skar Drives: 2010 2SSRS headers/CAI/tune/corsa, Join Date: May 2010 Location: Commerce twp Michigan Posts: 1,277	Sharp Mike! __________________ Stainless works headers/cats Roto fab CAI / Corsa and install and tune Livernois TSW Nuburgring 9 &10" x20 on Invos JL Audio XD400/4 amp Pfadt trailing arms & tie rods sway bars. pedders street 1 package

05-23-2012, 11:34 AM	#67
bannonm Drives: 2011 2SS/RS M6 VR Join Date: Aug 2011 Location: Chicagoland Posts: 1,152	Anyone running 20x10's all around? And with what tire? I'm looking for a decent track combination to get quickly. __________________

05-27-2012, 11:09 PM	#70
RedDragonSS TRI-COUNTY CAMAROS Drives: Red Camaro 2SS Join Date: Jan 2011 Location: Miami,FL Posts: 6,339 View My Garage	__________________

05-30-2012, 11:45 AM	#74
2010txss Drives: 2010 camaro 2ss Join Date: May 2012 Location: Krum TX Posts: 144 View My Garage	Just got some. Attached Images

05-30-2012, 06:21 PM	#75
RedDragonSS TRI-COUNTY CAMAROS Drives: Red Camaro 2SS Join Date: Jan 2011 Location: Miami,FL Posts: 6,339 View My Garage	Looks Sweet 2010txss.... I like the polished look on the silver... Congrats..... __________________