Sale - Interior Lighting Package

[sjmautoprod]

Originally Posted by Nutro

It's the new Zombie pattern from a company called Proveil. It's this one:

No luck with that one. :(

[Lil' Nasty]

Can you pm a price for the turquoise cup holder also have one question, what's the cleanest, and/or easiest to install this?

[sjmautoprod]

The easiest is the power-port version. The t-tap and t-harness versions are pretty easy, too.

[EBayy]

Can I get a PM with a price of the aqua blue cupholder and footwell lights to 48152

[sjmautoprod]

Sending PM....

[BigDog45th]

Can you PM me price for turquoise cup holder led kit with wire harness? Thanks!

[ty45]

I apologize if the following questions sound dumb but I haven't done anything like this before and this is my first ever car - I'd appreciate answers/suggestions aimed at the layman

Could you PM me the price for the turquoise and the ice blue (stock GM color) cup holder in matte finish for ZIP 94087?
If the difference isn't too much, I'd like to get as close to the stock interior light color as I can.

I don't want to get the power adapter since it seems like a clunky solution and I'd like to have the cup-holder lighting come on with the door panel lighting (I have a 2012 2LT) and I would cup holder lighting to dim along with the rest of the interior lighting when I use the brightness control (which dims the door panels, music controls etc).

1. Which type of connection would I need to be able to do the things I mentioned above? T-tap or t-harness?

2. I'm not familiar with what t-tap/t-harness are, even after a little Googling. Going by your note in the first post, am I correct in understanding that t-harnesses will not involve soldering but t-tap will require it? I'd like to get the simplest, least destructive connector without giving up the brightness control and the automatic switching on.

3. I would like to avoid any drilling. It sounded like drilling is only required for the door handle lighting but I'd like to confirm that I don't need to do it for the cup holder.

4. Would it be possible to get instructions for how to install this and connect the wiring? I hope to be able to do this all by myself without any specialized tools.

5. Finally, the big one! Will this void my warranty in any way (keeping in mind I'll be getting either the t-tap or the t-harness)?

Thanks for reading this far and for any answers that might be coming my way!

[sjmautoprod]

1. Both of those would give you control via the dimmer switch.

2. The t-harness is just for those with an aversion to t-taps. A t-tap is a terminal that "taps" into a wire by piercing the insulation. The t-tap harness can also be soldered in, if you want. You would just not use the t-taps.

3. Drilling is not required for cup holder panel installation.

4. Info will be in PM.

5. Unfortunately, that depends on your dealer.

[CPLS SS]

Please PM for cup holder?

[butters]

PM for cup holder please?

[sjmautoprod]

PM's sent.

[Layneone]

Can I get a pm of the price for the cupholder with orange lights if possible to zip 77086?

[sjmautoprod]

Actual orange, or, GM IOM (which is red)?

[Layneone]

Actual orange. sorry for the late response.

[sjmautoprod]

Bump!

[sjmautoprod]

Parts in stock for quick builds!

[jbrowne]

PLEASE PM ME PRICE ON ALL 3, THANKS !!!

[redhotcandy]

Please PM pricing for all three as a unit in red, then each seperately if would. Thanks!

[sjmautoprod]

PMs sent!

[DWALEX]

Can you pm a price for the turquoise CUP HOLDER

[sjmautoprod]

Will do!

[sjmautoprod]

Just realized that we can do a neat trick with the dual-source foot-wells...

Operation with the dome light, or, with dash lighting (dimmable).

Also, we just did a foot well kit using GM ice blue LED's and some light pipes. A great accent!

[sjmautoprod]

We hope to get pics of the footwell-pipe setup this weekend.

[moserbe]

Originally Posted by bajamoon

Welcome. Can you pm me a price on just the cup holder led. Thanks

Me too please.

[sjmautoprod]

PM sent!