Subthump complete package - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Waste · 05-15-2012, 09:06 AM

Hey guys, has anyone ordered this package from Subthump? I have a non-BA system and curious if the 'plug and play' harness will work? I'm looking to only add subs w/amp to my factory radio, nothing more nothing less.

http://subthump.com/Chevrolet-GMC-Su...e-clone-1.html

Pur3vil · 05-15-2012, 10:40 AM

I believe that harness is BA only, but i could be wrong. I know that Steve@subthump was talking about working on non-BA harnesses, but I do not know their status. Your best bet would be to contact Subthump and ask them.

Iwantone2 · 05-15-2012, 10:43 AM

As stated above, contact Steve directly for your options

SoooFlyyy · 05-15-2012, 05:39 PM

I actually emailed subthump with the same question. Steve told me that he could substitute a LOC instead of the BA harness. Still unsure of how to do this myself as I do not have much experience with audio systems. Would rather not pay someone to install though. are you going to install this kit yourself?

Pur3vil · 05-15-2012, 08:05 PM

I had never done anything prior to my install either. I do have the BA system, but it wasn't that bad. I did the stealth box/5 channel amp system and put together a DIY on how to do it. I don't see this system being much different, other than the harness(es).

Waste · 05-15-2012, 08:20 PM

Most likely yes, the LOC doesn't look too complicated.. I still have questions on how/where the remote wire would go though.

SoooFlyyy · 05-15-2012, 08:29 PM

Quote:

Originally Posted by Pur3vil

I had never done anything prior to my install either. I do have the BA system, but it wasn't that bad. I did the stealth box/5 channel amp system and put together a DIY on how to do it. I don't see this system being much different, other than the harness(es).

Can I get a link to your DIY?

SoooFlyyy · 05-15-2012, 08:34 PM

Quote:

Originally Posted by Waste

Most likely yes, the LOC doesn't look too complicated.. I still have questions on how/where the remote wire would go though.

Yeah, me too. I've seen some of the DIY's on here, but its hard for me to find out what I would have to do as most people seem to have the BA system.

Pur3vil · 05-16-2012, 07:37 AM

http://www.camaro5.com/forums/showthread.php?t=218235

Like I said, it is a different system than what you were looking at, and it is for a BA system, but I imagine that most of the steps should be similar...

05-15-2012, 09:06 AM	#1
Waste Drives: 2012 Camaro 1LT M6 Join Date: Apr 2012 Location: NE Florida Posts: 106	Subthump complete package Hey guys, has anyone ordered this package from Subthump? I have a non-BA system and curious if the 'plug and play' harness will work? I'm looking to only add subs w/amp to my factory radio, nothing more nothing less. http://subthump.com/Chevrolet-GMC-Su...e-clone-1.html

05-15-2012, 10:43 AM	#3
Iwantone2 Pinche Team Leader Drives: CGM 1SS RS Join Date: Feb 2009 Location: OC Cali Posts: 9,099 View My Garage	As stated above, contact Steve directly for your options __________________

05-15-2012, 10:40 AM	#2
Pur3vil Drives: 2010 ABM 2SS/RS M6 Join Date: Jun 2009 Location: West Chester, Ohio Posts: 85	I believe that harness is BA only, but i could be wrong. I know that Steve@subthump was talking about working on non-BA harnesses, but I do not know their status. Your best bet would be to contact Subthump and ask them.

05-15-2012, 05:39 PM	#4
SoooFlyyy Drives: 2012 IBM 1LT/RS w/ SIM Rallies Join Date: Dec 2011 Location: Charleston, SC Posts: 84 View My Garage	I actually emailed subthump with the same question. Steve told me that he could substitute a LOC instead of the BA harness. Still unsure of how to do this myself as I do not have much experience with audio systems. Would rather not pay someone to install though. are you going to install this kit yourself?

05-15-2012, 08:05 PM	#5
Pur3vil Drives: 2010 ABM 2SS/RS M6 Join Date: Jun 2009 Location: West Chester, Ohio Posts: 85	I had never done anything prior to my install either. I do have the BA system, but it wasn't that bad. I did the stealth box/5 channel amp system and put together a DIY on how to do it. I don't see this system being much different, other than the harness(es).

05-15-2012, 08:20 PM	#6
Waste Drives: 2012 Camaro 1LT M6 Join Date: Apr 2012 Location: NE Florida Posts: 106	Most likely yes, the LOC doesn't look too complicated.. I still have questions on how/where the remote wire would go though.

05-16-2012, 07:37 AM	#9
Pur3vil Drives: 2010 ABM 2SS/RS M6 Join Date: Jun 2009 Location: West Chester, Ohio Posts: 85	http://www.camaro5.com/forums/showthread.php?t=218235 Like I said, it is a different system than what you were looking at, and it is for a BA system, but I imagine that most of the steps should be similar...