Hurst Billet/Plus 2 shifter with stock housing - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

nightmarechevy · 05-13-2012, 09:51 AM

Hurst Billet/Plus 2 short shifter - $70 obo
This shifter was on the car when I purchased it and prefered the MGW so I upgraded to it. Car had 4k miles when pulled but am unsure when it was installed. I do not have the chrome handle or the white ball, only have the stock knob handle as it is what came on the car. The chrome handle can be found fairly cheap or you can find a shorter threaded stick for 19 bucks if you want to use a screw on ball and don't want to have a chrome stick showing (I can send you an ebay link if interested). Comes with all bolts, loctite, dust boot retainer, everything pictured. Asking $70 or trade.

nightmarechevy · 05-18-2012, 04:14 PM

Bump, offers?

nightmarechevy · 05-24-2012, 06:40 PM

Trades?

nightmarechevy · 05-25-2012, 10:07 AM

Quote:

Originally Posted by nightmarechevy

Asking $150 obo or trade.

Again, this is just an asking price and is in no way set in stone. Price is negotiable so if you think it is too high, shoot me an offer on it and we can go from there. Im not hurting to sell it but Im not looking to make a fortune off of it either. Im open to offers, trades, partial trades.

nightmarechevy · 05-31-2012, 06:46 PM

Edited first post, bump. If you are looking to thread on a universal knob but do not want a retro chrome stick TNA Motorsports sells a stick that is 5.5" and has M16x1.50 threads for $20 shipped that is supposed to bolt up directly to the Hurst base.

nightmarechevy · 06-16-2012, 11:21 AM

Stock knob and housing sold, bump for Hurst short throw. $70 shipped to lower 48 or trade.

JTRJSS · 06-16-2012, 07:37 PM

I will give you the $70. PM Me

nightmarechevy · 06-16-2012, 08:02 PM

PM returned.

nightmarechevy · 06-16-2012, 08:19 PM

SOLD

05-13-2012, 09:51 AM	#1
nightmarechevy Drives: 98 Z28 LS1 M6, 10 2SS/RS M6 Join Date: Mar 2012 Location: San Angelo, TX Posts: 175 View My Garage	Hurst Billet/Plus 2 shifter Hurst Billet/Plus 2 short shifter - $70 obo This shifter was on the car when I purchased it and prefered the MGW so I upgraded to it. Car had 4k miles when pulled but am unsure when it was installed. I do not have the chrome handle or the white ball, only have the stock knob handle as it is what came on the car. The chrome handle can be found fairly cheap or you can find a shorter threaded stick for 19 bucks if you want to use a screw on ball and don't want to have a chrome stick showing (I can send you an ebay link if interested). Comes with all bolts, loctite, dust boot retainer, everything pictured. Asking $70 or trade. __________________ 2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, mystery clutch, RAM clutch release bearing, 22" Forgestar F14s, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes, more to come 1998 Z28 LS1 M6 - G5X4, full exhaust, full suspension, 4.10s, stage 3 clutch, bolt ons, much more 2010 Colorado CC 4x4 3.7L Last edited by nightmarechevy; 06-16-2012 at 11:20 AM.

05-18-2012, 04:14 PM	#2
nightmarechevy Drives: 98 Z28 LS1 M6, 10 2SS/RS M6 Join Date: Mar 2012 Location: San Angelo, TX Posts: 175 View My Garage	Bump, offers? __________________ 2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, mystery clutch, RAM clutch release bearing, 22" Forgestar F14s, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes, more to come 1998 Z28 LS1 M6 - G5X4, full exhaust, full suspension, 4.10s, stage 3 clutch, bolt ons, much more 2010 Colorado CC 4x4 3.7L

05-24-2012, 06:40 PM	#3
nightmarechevy Drives: 98 Z28 LS1 M6, 10 2SS/RS M6 Join Date: Mar 2012 Location: San Angelo, TX Posts: 175 View My Garage	Trades? __________________ 2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, mystery clutch, RAM clutch release bearing, 22" Forgestar F14s, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes, more to come 1998 Z28 LS1 M6 - G5X4, full exhaust, full suspension, 4.10s, stage 3 clutch, bolt ons, much more 2010 Colorado CC 4x4 3.7L

05-31-2012, 06:46 PM	#5
nightmarechevy Drives: 98 Z28 LS1 M6, 10 2SS/RS M6 Join Date: Mar 2012 Location: San Angelo, TX Posts: 175 View My Garage	Edited first post, bump. If you are looking to thread on a universal knob but do not want a retro chrome stick TNA Motorsports sells a stick that is 5.5" and has M16x1.50 threads for $20 shipped that is supposed to bolt up directly to the Hurst base. __________________ 2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, mystery clutch, RAM clutch release bearing, 22" Forgestar F14s, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes, more to come 1998 Z28 LS1 M6 - G5X4, full exhaust, full suspension, 4.10s, stage 3 clutch, bolt ons, much more 2010 Colorado CC 4x4 3.7L

06-16-2012, 11:21 AM	#6
nightmarechevy Drives: 98 Z28 LS1 M6, 10 2SS/RS M6 Join Date: Mar 2012 Location: San Angelo, TX Posts: 175 View My Garage	Stock knob and housing sold, bump for Hurst short throw. $70 shipped to lower 48 or trade. __________________ 2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, mystery clutch, RAM clutch release bearing, 22" Forgestar F14s, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes, more to come 1998 Z28 LS1 M6 - G5X4, full exhaust, full suspension, 4.10s, stage 3 clutch, bolt ons, much more 2010 Colorado CC 4x4 3.7L

06-16-2012, 07:37 PM	#7
JTRJSS Drives: 2011 Red Jewel 2SS M6 Join Date: Apr 2012 Location: Harrison, NY Posts: 95	I will give you the $70. PM Me __________________ CAI-Cold Air Intake,Hurst Shifter,JRE Tune,Stainless Power 1 7/8" Headers/High-Flow Cats,SLP UD Pulley,Pedders Subframe Bushing Inserts,Pfadt Trailing Arms, Lakewood Toe Rods,Pedders Radius Rod Inserts,Maganflow X Pipe,GMPP Axle Back Exhaust,AR Torq Thrust M 20" Rims,BMR Strut Tower Brace,Hawk HPS Disc Pads Front/Rear,BMR Subframe Connector/Tunnel Brace,Dove Tail Spoiler,BMR Front Sway Bar,Spohn Sway Bar Links Front,ZL1 Rear Sway Bar/GM End Links,GM 2012 Rear LCAs,1000HP DSS Axles,Lingenfelter 3.91 Ratio/Eaton Truetrac Differential/JRE Billet Caps,Drive Shaft Loop,No Weeds Exhaust Diverters

06-16-2012, 08:02 PM	#8
nightmarechevy Drives: 98 Z28 LS1 M6, 10 2SS/RS M6 Join Date: Mar 2012 Location: San Angelo, TX Posts: 175 View My Garage	PM returned. __________________ 2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, mystery clutch, RAM clutch release bearing, 22" Forgestar F14s, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes, more to come 1998 Z28 LS1 M6 - G5X4, full exhaust, full suspension, 4.10s, stage 3 clutch, bolt ons, much more 2010 Colorado CC 4x4 3.7L

06-16-2012, 08:19 PM	#9
nightmarechevy Drives: 98 Z28 LS1 M6, 10 2SS/RS M6 Join Date: Mar 2012 Location: San Angelo, TX Posts: 175 View My Garage	SOLD __________________ 2010 2SS/RS LS3 M6 - Vararam, VMAX PTB, Solo Mach X, MGW, mystery clutch, RAM clutch release bearing, 22" Forgestar F14s, R1 Concepts d/s rotors, CGM heritage grille, Texas Speed 2" long tubes, more to come 1998 Z28 LS1 M6 - G5X4, full exhaust, full suspension, 4.10s, stage 3 clutch, bolt ons, much more 2010 Colorado CC 4x4 3.7L