Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
ADM PERFORMANCE
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6)

V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) Driveshafts | Differentials | Gears | Rearends | Clutch | Shifters

Reply
 
Thread Tools
Old 06-02-2012, 03:39 PM   #26
Smirnoff

 
Smirnoff's Avatar
 
Drives: Camaro SS
Join Date: Mar 2010
Location: Motorcity Dragway
Posts: 949
Quote:
Originally Posted by NH-SS View Post
FYI,..

Update to all that are interrested.

The bushing material has been delivered. I have to take out my shifter tomorrow for dims. and make a B/P. If everything goes to plan I should have some ready in a week or so. I have set up a paypal account to place orders for these. They will not be expensive at all. I will post the order info when the bushings are ready.
PM if you any questions.
Sweet - thanks!
__________________
11.90's w/headers, CAI, tune, & some high-test (no bling).



Smirnoff is offline   Reply With Quote
Old 06-02-2012, 06:23 PM   #27
EODlewis ss
 
EODlewis ss's Avatar
 
Drives: white 2012 camaro ss/rs
Join Date: Apr 2012
Location: NE Ohio
Posts: 192
ill take one
EODlewis ss is offline   Reply With Quote
Old 06-03-2012, 07:36 AM   #28
Falundir

 
Falundir's Avatar
 
Drives: 2012 45th Anniversary Edition SS
Join Date: Jul 2011
Location: East Bay
Posts: 2,130
I'll take two!
Falundir is offline   Reply With Quote
Old 06-03-2012, 10:32 AM   #29
10aSSee D

 
10aSSee D's Avatar
 
Drives: Silver 2010 SS Camaro
Join Date: Jul 2009
Location: TN
Posts: 1,830
I'm also interested in 2 when they are ready.
__________________
MODS:

ADM built 417, 2.9L Whipple with 3.250 pulley, ADM ported and polished LSA heads,ADM stage3 cam,ADM LSA belt drive system,ADM CAI race scoop, ADM dual fuel pumps, ID 850's, BMR full suspension, Gforce 9 inch kit with 3.5 inch driveshaft, Street Slayer twin carbon clutch, Lingenfelter oil seperator. Tuned by built by ADM Performance, 740rwhp,685rwtq
10aSSee D is offline   Reply With Quote
Old 06-03-2012, 09:05 PM   #30
chetkan
 
chetkan's Avatar
 
Drives: 2011 Camaro 2SS/RS Synergy Green
Join Date: Jun 2011
Location: Groton, CT
Posts: 455
Please send me a pm when they are ready. Thanks
chetkan is offline   Reply With Quote
Old 06-03-2012, 09:38 PM   #31
Johng57
Mid-Wife Crisis
 
Johng57's Avatar
 
Drives: 2012 Black 2SS / RS
Join Date: Aug 2011
Location: South River, NJ
Posts: 378
I'll take one.

Thanks.
__________________
Order PVSN9X - 2SS Black, RS, GFX....
VIN - 9125176
10/08/2011 (6000) Vehicle delivered to customer or dealer has completed customer paperwork
Johng57 is offline   Reply With Quote
Old 06-04-2012, 08:45 PM   #32
DMAX
 
DMAX's Avatar
 
Drives: 01 silverado 2010 2SS/RS Sim
Join Date: Jun 2009
Location: MA
Posts: 197
I'll take two!
DMAX is offline   Reply With Quote
Old 06-05-2012, 09:54 AM   #33
funk69z/28
 
funk69z/28's Avatar
 
Drives: 2011 SS/RS n 1969 Z28
Join Date: Mar 2012
Location: Cape Coral FL
Posts: 93
I am in, keep us posted.
__________________
1969 Z/28 DZ302 95% Stock
2011 SS/RS Slowly becoming not stock.
funk69z/28 is offline   Reply With Quote
Old 06-05-2012, 10:12 AM   #34
Nessal


 
Drives: Lotus Exige
Join Date: Jun 2011
Location: CA, Bay Area
Posts: 2,269
Definitely in for one!
Nessal is offline   Reply With Quote
Old 06-05-2012, 10:28 AM   #35
patternpilot
 
patternpilot's Avatar
 
Drives: 2012 2SS/RS 05 Jag S type R
Join Date: Aug 2011
Location: Tri-Cities WA.
Posts: 595
If you don't have me already, ill take one.
__________________
There's more to life than gas mileage

LS3, Whipple, Custom Comp Cam, springs, pushrods, timing set, CAI intake, Apex cold air scoop, Doug Thorley TRI-Y headers, Billet Custom Products baffled Valve covers, Mighty Mouse Catch can, ADM FPCM, ZL1 fuel pump, MSD boost-a-pump, Hex Vent hood vents, ProSport gauges(fuel pressure, AFR, Boost), Corsa, No Cats. Jannetty remote tuned, Pfadt trailing arms, all parts user installed. No Dyno yet. Manual trans. 3.45 gears.
patternpilot is offline   Reply With Quote
Old 06-05-2012, 10:34 AM   #36
fargomike
The Dude Abides
 
fargomike's Avatar
 
Drives: Black 2SS M6
Join Date: Apr 2010
Location: Fargo , ND
Posts: 491
I am in as well ! Anyone know if this could effect the Hurst warranty ? I really don't care am just curious .
__________________
2010 Black 2SS/LS3/M6 Kooks 1 7/8 Ceramic Coated Headers, Borla ATAK CB , JRE Tune , Halltech Yellow Jacket CAI ,VMax Ported TB, PFADT Coilovers,Forgestar CF5's Textured Gunmetal w/Nitto Invo's 275/315 ,Hurst Billet Plus 2 Shifter AAC P13W Plasma LEDw/DRL Harness ,30% Tinting,
fargomike is offline   Reply With Quote
Old 06-05-2012, 11:52 AM   #37
NH-SS
 
Drives: 2010 SS2,6M
Join Date: May 2012
Location: NH
Posts: 80
Funny you should mention that,.. As I'm getting ready to start making these bushings, writing directions on how to install them. I'm concerned about in propper installation and any potential issues that may arise from that.
While I have over 10k on mine,.. and it's still pretty much perfect. There is the question of any liability.
Comments ??
NH-SS is offline   Reply With Quote
Old 06-05-2012, 12:28 PM   #38
LineofPerfection
 
LineofPerfection's Avatar
 
Drives: 2010 2SS Camaro "Big Blue"
Join Date: Nov 2009
Location: Versailles, Kentucky
Posts: 275
Pm me the cost for a set, I definatelty want some too. Love the shifter, hate the play !
__________________
Big Blue

LineofPerfection is offline   Reply With Quote
Old 06-05-2012, 02:50 PM   #39
JM10
Se habla espaņol
 
JM10's Avatar
 
Drives: 2010 Camaro SS/RS VR
Join Date: Jun 2009
Location: Arizona/Sonora
Posts: 607
Hurst Warranty?

They just sent you a new bushing that its going to wear in a couple of months....

So I dont care about warranty I just want to get rid of the "play" that my shifter has..

NH-SS good work Are the bushings ready?

JM
__________________
2010 VR 2SS/RS
BMR Suspension Parts
Hendrix HD Axles
DSS Aluminum Shaft
RPM Diff / 3.91 Gears
LPE ZR1 Clutch
Edelbrock E-Force SC / JRE Fuel Upgrade
Livernois 1C cam 570 rwhp/559 rwtq SAE
Best 1/4 time: 11.43
JM10 is offline   Reply With Quote
Old 06-05-2012, 02:55 PM   #40
blazzin1


 
blazzin1's Avatar
 
Drives: 2010 2SS/RS R6P
Join Date: Nov 2008
Location: Seffner, FL
Posts: 4,260
Quote:
Originally Posted by NH-SS View Post
Funny you should mention that,.. As I'm getting ready to start making these bushings, writing directions on how to install them. I'm concerned about in propper installation and any potential issues that may arise from that.
While I have over 10k on mine,.. and it's still pretty much perfect. There is the question of any liability.
Comments ??
Just sell them with the understanding...."Install at your own risk". I will still buy a set (I'm first on the list!!!).

But yes, some sort of instructions would be nice. I don't need anything as far as getting the shifter out of the car or putting it back in, but if there is anything special required to physically put the bushing where it needs to go, I would like to know that.
__________________
ARH 1-7/8" LT Headers w/HF Cats, Stainless Works 3" Retro-Chambered Cat Back, New Era OTR CAI, AAM 3.91 R&P, Eaton TrueTrac Posi,
JRE Billet Caps, LPW Diff Cover, BMR Drag Race Suspension Package (DRP007), BMR Toe Rods (TR004), BMR Xtreme Drag Bar (XSB004),
BMR Sway Bar End Links (ELK004), BMR Driveshaft Safety Loop (DSL014), Farks No-Hop UCA Bushings, Pfadt Solid Subframe Bushings,
QA1 DA Front Coilovers, Strange Engineering DA Rear Coilovers, Mike Norris Catch-Can, V-Max CNC PTB, Aeromotive Fuel Rails.
blazzin1 is offline   Reply With Quote
Old 06-05-2012, 02:58 PM   #41
tramtwo


 
Drives: 2013 1LE
Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,510
Send me a set too... I assume all responsibility.
tramtwo is offline   Reply With Quote
Old 06-05-2012, 07:11 PM   #42
NH-SS
 
Drives: 2010 SS2,6M
Join Date: May 2012
Location: NH
Posts: 80
Great feed back,.. Thanks
NH-SS is offline   Reply With Quote
Old 06-05-2012, 11:17 PM   #43
patternpilot
 
patternpilot's Avatar
 
Drives: 2012 2SS/RS 05 Jag S type R
Join Date: Aug 2011
Location: Tri-Cities WA.
Posts: 595
I assume all responsibility.
__________________
There's more to life than gas mileage

LS3, Whipple, Custom Comp Cam, springs, pushrods, timing set, CAI intake, Apex cold air scoop, Doug Thorley TRI-Y headers, Billet Custom Products baffled Valve covers, Mighty Mouse Catch can, ADM FPCM, ZL1 fuel pump, MSD boost-a-pump, Hex Vent hood vents, ProSport gauges(fuel pressure, AFR, Boost), Corsa, No Cats. Jannetty remote tuned, Pfadt trailing arms, all parts user installed. No Dyno yet. Manual trans. 3.45 gears.
patternpilot is offline   Reply With Quote
Old 06-05-2012, 11:30 PM   #44
MustangKiller
 
MustangKiller's Avatar
 
Drives: 2013 2ss/rs A6 yellow !!!!!
Join Date: Nov 2011
Location: Woodbine Maryland
Posts: 465
It would be great if you guys could answer my poll im going too make every effort i can too get somthing done about this. Good job NH-SS keep up the good work!!!!
MustangKiller is offline   Reply With Quote
Old 06-06-2012, 07:36 AM   #45
toml_pa
ʇuɐıʌǝp lɐıɔos
 
toml_pa's Avatar
 
Drives: 2011 2SS/RS LS3/M6
Join Date: Feb 2011
Location: Pennsylvania
Posts: 231
Quote:
Originally Posted by NH-SS View Post
Funny you should mention that,.. As I'm getting ready to start making these bushings, writing directions on how to install them. I'm concerned about in propper installation and any potential issues that may arise from that.
While I have over 10k on mine,.. and it's still pretty much perfect. There is the question of any liability.
Comments ??
As far as the Hurst warranty goes (didn't even know there was one), the only way they will know you replaced their bushing is if you tell them. If you have to send it back, just put their bushing back in first. Here is a link to Hurst's installation instructions and here is a link to Hurst's install video. I wouldn't think any other instructions would be necessary.
Would also like to thank NH-SS for taking the time to make these bushings and to say I assume all responsibility for any disastrous events that may occur as a result of my installing this potentially dangerous bushing. LOL.
__________________

Way too many mods and way too much money. Wouldn't have it any other way.
toml_pa is offline   Reply With Quote
Old 06-06-2012, 01:19 PM   #46
chetkan
 
chetkan's Avatar
 
Drives: 2011 Camaro 2SS/RS Synergy Green
Join Date: Jun 2011
Location: Groton, CT
Posts: 455
I assume all responsibility and agree to not hold you liable for any damages whatsover as a result of me installing the bushing that you manufactured to correct a known problem that the original manufacturer should've caught before releasing the product to the public.
chetkan is offline   Reply With Quote
Old 06-06-2012, 01:27 PM   #47
NH-SS
 
Drives: 2010 SS2,6M
Join Date: May 2012
Location: NH
Posts: 80
Amen,..!!
NH-SS is offline   Reply With Quote
Old 06-06-2012, 01:37 PM   #48
J-Rod6410
M6 10 second club
 
J-Rod6410's Avatar
 
Drives: A 4000 Lb BeaSSt
Join Date: Jul 2009
Location: Crackin Azz on a hi-way near you
Posts: 1,039
I'll take a set also asap!!

I've been trying to reach Hurst for 3 weeks now on 3 different numbers! They dont answer the phone and they dont return messages. I can see why their shifter is half price now from when I bought mine. I've already replaced the bushings so many times I can do it with my eyes closed

And I dont need install instructions and I assume all liability for using the bushings you're making!

Thanks!

Are they ready????????????
__________________
TEAM LS3 Best pass: 10.72 @ 132

919RWHP 749RWTQ ECS S/C stock bottom end
Built by: J-Rod.... Tuned by: Matt Sorian @ FSP (floridaspeedandpower.com)
Check out my youtube channel: http://www.youtube.com/user/6410Jrod
Follow me on Instagram: @J_Rod6410
J-Rod6410 is offline   Reply With Quote
Old 06-06-2012, 01:41 PM   #49
vam5555
 
Drives: used to be-2012 camaro 2SS - Black
Join Date: Apr 2012
Location: NoVA
Posts: 35
I'd be interested in a set, when they are ready. I haven't put my shifter in yet, but I'd like to have your bushing ready in the event that the shifter starts to experience the problems everyone here has.

I'm good with taking full responsibility if something goes wrong with my car.

My Car, My Choice!
vam5555 is offline   Reply With Quote
Old 06-06-2012, 02:25 PM   #50
NH-SS
 
Drives: 2010 SS2,6M
Join Date: May 2012
Location: NH
Posts: 80
First run of bushings should be ready next week. I will keep you posted.
NH-SS is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:58 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.