You are browsing camaro5 
 |
|
|
|||||||
| Homepage | Garage | Wiki | Register | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
| V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) Driveshafts | Differentials | Gears | Rearends | Clutch | Shifters |
 |
|
|
Thread Tools |
05-07-2012, 03:23 PM
|
#1 |
       
Drives: 2010 X5 Camaro Turbo Join Date: Apr 2012
Location: Houston, TX
Posts: 1,893
|
Phastek installation of DSS 1000HP axles
Here are some pics of the DSS 1000HP rated axles we recently installed.
Just after removing the tires lol  Pic of the stock axle before removing  Pic of the front side after removing the caliper and securing it away  Remove the bolts holding the lower and upper control arms and tie bar and trailing arm. although in the picture the bottom strut bolt is removed it isn't neccessary  Remove the knuckle normally it's best to remove the rear brake cable. In our case, we lowered the car on the rack and supported the knuckle assembly  Remove the stock axle   Difference between the two axles stock and DSS   Install in the reverse order of the above and you get  Rinse, wash, and repeat for the other side and completed project and added peace of mind that you now have axles that can handle the added HP of a forced induction setup or all motor setup 
__________________
Last edited by Sales@Phastek; 05-15-2012 at 10:25 AM. |
|
|
|
05-07-2012, 07:01 PM
|
#2 |
|
Burning up tires
Drives: 2010 Camaro 1SS/RS Join Date: Jul 2010
Location: Macomb Twp, MI
Posts: 675
|
Very nice, I want!
__________________
Blower, cam, supporting mods 644RWHP 615RWTQ
My Build Thread COTW 11/19/12 Detroit 5th Gen Camaro Club |
|
|
|
|
05-09-2012, 06:47 AM
|
#3 |
 
Drives: own more cars than i can list Join Date: Nov 2010
Location: Charlotte NC
Posts: 795
|
looking good, we have been having real good sucess with this new design axle set.
__________________
The Driveshaft Shop
Any of the parts we post about can be purchased thru our extensive dealer network If you want to see some of our latest Hi-Tech stuff click the picture below....  |
|
|
|
|
05-09-2012, 10:57 PM
|
#4 |
|
TRI-COUNTY CAMAROS
|
Getting my set installed tomorrow can't wait... Bring on the Powa!!!
__________________
 |
|
|
|
|
05-11-2012, 02:34 PM
|
#5 | |
|
Drives: 2010 X5 Camaro Turbo Join Date: Apr 2012
Location: Houston, TX
Posts: 1,893
|
Quote:
|
|
|
|
|
|
05-12-2012, 01:24 PM
|
#6 |
|
TRI-COUNTY CAMAROS
|
Got them installed by my friends at Torq.. Everything is perfect drives and spunds like stock on my lowered car with the Safety of knowing they can handle whatever I am going to throw at them...
__________________
|
|
|
|
|
05-15-2012, 09:35 AM
|
#7 |
|
Troll Squad Pres.
Drives: 2011 SS/RS Join Date: May 2011
Location: North Carolina
Posts: 15,246
|
Great write up
__________________
 |
|
|
|
|
06-08-2012, 11:03 AM
|
#8 |
|
Drives: 2010 X5 Camaro Turbo Join Date: Apr 2012
Location: Houston, TX
Posts: 1,893
|
|
|
|
|
|
06-14-2012, 03:36 PM
|
#9 |
|
Drives: 2010 X5 Camaro Turbo Join Date: Apr 2012
Location: Houston, TX
Posts: 1,893
|
post or pm with questions
|
|
|
|
|
06-23-2012, 10:46 PM
|
#10 |
 Drives: Denali Join Date: Mar 2012
Location: Houston
Posts: 58
|
Has anyone broke the 1000hp axles yet?
|
|
|
|
|
06-30-2012, 04:36 PM
|
#11 |
|
Blown Cool Breeze
Drives: 2011 Black on Black 2SS M6 Join Date: Jul 2010
Location: Pinehurst NC
Posts: 921
|
Just Installed my DSS 1000hp axles today and I have a question.
Probably nothing but I noticed the stepped edge, I pointed out with an arrow,does not go into the dust seal like the factory axles.The Oil seal is good to go....Maybe because they are intended to be "RACE" only?Seems like a good place for water and junk to collect. They are seated all the way and it seems they should.Anybody else notice this or am I missing something here?
__________________
 2011 Black on Black 2SS M6Had a 2010 IBM 2SS M6 Enjoy life.Think of all the women on the Titanic who passed up dessert. |
|
|
|
|
06-30-2012, 06:10 PM
|
#12 | |
|
Blown Cool Breeze
Drives: 2011 Black on Black 2SS M6 Join Date: Jul 2010
Location: Pinehurst NC
Posts: 921
|
Quote:
I may have answered my own question...This pic is of the 1400hp axles. See how the area I pointed to on the 1000hp axles is not designed to ride on a seal...at least that is what I'm seeing.
__________________
2011 Black on Black 2SS M6Had a 2010 IBM 2SS M6 Enjoy life.Think of all the women on the Titanic who passed up dessert. |
|
|
|
|
|
07-02-2012, 12:10 PM
|
#13 | |
|
Drives: 2010 X5 Camaro Turbo Join Date: Apr 2012
Location: Houston, TX
Posts: 1,893
|
Quote:
|
|
|
|
|
|
07-02-2012, 12:12 PM
|
#14 | |
|
Drives: 2010 X5 Camaro Turbo Join Date: Apr 2012
Location: Houston, TX
Posts: 1,893
|
Quote:
|
|
|
|
|
|
07-02-2012, 08:16 PM
|
#15 | |
|
Blown Cool Breeze
Drives: 2011 Black on Black 2SS M6 Join Date: Jul 2010
Location: Pinehurst NC
Posts: 921
|
Quote:
Thanks Man for answering my question. It just looked like it could from the machined diameter. My axles are good...no leaks either!
__________________
2011 Black on Black 2SS M6Had a 2010 IBM 2SS M6 Enjoy life.Think of all the women on the Titanic who passed up dessert. |
|
|
|
|
|
07-03-2012, 06:21 AM
|
#16 | |
|
Drives: own more cars than i can list Join Date: Nov 2010
Location: Charlotte NC
Posts: 795
|
Quote:
no, none of them have broken. i was hoping others would chime in.
__________________
The Driveshaft Shop
Any of the parts we post about can be purchased thru our extensive dealer network If you want to see some of our latest Hi-Tech stuff click the picture below.... Last edited by Driveshaftshop; 07-03-2012 at 07:18 AM. |
|
|
|
|
|
| Thread Tools | |
|
|
