![]() |
|
|||||||
| Homepage | Garage | Wiki | Register | Members List | Social Groups | Calendar | Search | Today's Posts | Mark Forums Read |
| Wheels and Tires Talk Sponsored by The Tire Rack Discuss issues related to wheels and tires |
![]() |
|
|
Thread Tools |
|
|
#176 |
![]() Drives: 2013 ZL1, Victory red Join Date: Apr 2011
Location: Lloydminster Alberta, Canada.
Posts: 8
|
I have new 20x9.5 front and 20x11 rear wheels. Just wanted to make sure, would the stock tires from the ZL1 be a good fit for these? I have an SS, and this would make locating and purchasing tires much more painless. I'm hoping these tires won't throw off systems and will fit nicely.
Thanks! |
|
|
|
|
|
#177 |
![]() Drives: 2010 Victory Red Camaro SS/RS LS3 Join Date: Oct 2010
Location: Long Island
Posts: 130
|
Could u run a 305/35/20 drag radial on the stock 9" wheel?
|
|
|
|
|
|
#178 |
![]() Drives: 1975 trans am, 2010 camaro ss/rs Join Date: Jan 2009
Location: NEWNAN
Posts: 29
|
i got 20x8.5 with 225 35 20 in the front and 20x10 with 245 35 20 in the rear with 20mm offset all around its at the tire place as i type getting put on wat ya think?
|
|
|
|
|
|
#179 |
![]() ![]() ![]() ![]() ![]() Drives: '10 LT RS A6 & '04 Acura RSX Type S Join Date: Oct 2009
Location: Florida
Posts: 1,552
|
I sure hope the tire shop talked you out of that combination! Those tires are WAY too narrow for those width rims!
__________________
![]() |
|
|
|
|
|
#180 |
![]() Drives: 1975 trans am, 2010 camaro ss/rs Join Date: Jan 2009
Location: NEWNAN
Posts: 29
|
i just got the car back and the reason i got them that size was so i can lower it and the tires wont hit the fender cuz of the 20mm offset but im not so sure about the 35 i kinda wish i would of went with 40 on tire height
![]()
|
|
|
|
|
|
#181 |
![]() ![]() ![]() ![]() ![]() Drives: '10 LT RS A6 & '04 Acura RSX Type S Join Date: Oct 2009
Location: Florida
Posts: 1,552
|
The big problem will come when you roll the tire off the rim! That tire is stretched beyond a safe distance and the shop that put those on should be avoided at all costs!
__________________
![]() |
|
|
|
|
|
#182 |
![]() Drives: 1975 trans am, 2010 camaro ss/rs Join Date: Jan 2009
Location: NEWNAN
Posts: 29
|
the stretch aint that much my cuzin has way more stretch on his wheels then i do he has 215 on 17x10 and he races his car and so far nothings happened and he has lots of negative camber as well
|
|
|
|
|
|
#183 |
![]() Drives: 1975 trans am, 2010 camaro ss/rs Join Date: Jan 2009
Location: NEWNAN
Posts: 29
|
i believe its dumb drivers that have probs with stretch tires
|
|
|
|
|
|
#184 | |
|
It's not just a hobby!
Drives: 2010 2SS/RS Join Date: Apr 2010
Location: Jax, FL.
Posts: 1,414
|
Quote:
For racing you want as much tire as possible.
__________________
|
|
|
|
|
|
|
#185 |
![]() |
Need Wheel Sugestions
To many camaros in my town...need mine to stand out. Any suggestions on wheels for Black SS
__________________
2010 2SS/RS K&N CAI, American Racing Headers, Magnaflows, TVS 2300 S/C
|
|
|
|
|
|
#186 |
![]() |
are your wheels factory just powder coated? looks good
__________________
2010 2SS/RS K&N CAI, American Racing Headers, Magnaflows, TVS 2300 S/C
|
|
|
|
|
|
#187 |
![]() Drives: 2011 Camaro 1lt rs auto 4-9-11 Join Date: Apr 2009
Location: NY Long Island
Posts: 704
|
will a 20x10 rim fit the stock rear tires 275 from a rs 20in?
__________________
|
|
|
|
|
|
#188 |
![]() |
Hey 9 Ball,
Thanks for the info. I just ordered a set of Hurst Stunner wheels and 315-35-20s Nitto Invos for the back and 275-40-20s for the front. Camaro1954 Steve |
|
|
|
|
|
#189 |
![]() |
I have a 2011 camaro 2ss/rs and want to run 18 inch dr's. i need to know what specs I will be looking for on wheels. ie...biggest offset and hub size. can anyone fill in the blanks for me. thanks..
|
|
|
|
|
|
#190 | |
![]() |
Quote:
![]() Interesting aside: I have 10" wide rears. The guy at www.discounttiredirect.com told me the 295/35/20 Nitto Invo, which is what I originally ordered, isn't properly weight/load rated for the Camaro. As a result, he recommended a 315 and guaranteed it'll work on my current wheel, so I changed the order. Can anyone confirm that as the truth? Here's the car: ![]() I knew the tires needed to be replaced, but shame on me because I REALLY let these tires get bad. One finally blew out this afternoon, but thankfully it was less than 5 mph. ![]() ![]() Shamefully, all four are like this. (And I SERIOUSLY need an alignment.) ![]() How the hell did I not notice?
|
|
|
|
|
|
|
#191 |
![]() Drives: 2011 White Join Date: Aug 2011
Location: Alexander City, Alabama
Posts: 78
|
Forgestar Bronze Burst 22x9 22x10.5
265/35/22 305/35/22 Vredestein Ultrac Sessanta Megan Coil overs ![]() More pics ![]() ![]() ![]()
Last edited by Hot Rod R1; 11-22-2012 at 10:28 AM. |
|
|
|
|
|
#192 |
![]() Drives: Camaro 2010 V6 LT Join Date: Mar 2010
Location: Kuwait
Posts: 10
|
hello dear thanks for valuable info but i have one question is it also valid for V6 LT models?
|
|
|
|
|
|
#193 |
|
Dean Voss
|
I have Nitto 275/40R20S If I install a set of 3.73 gears would that help my 0 to 60. thanks deno.
|
|
|
|
|
|
#194 |
|
Emerald Coast Camaros
Drives: 2010 2SS Rally Yellow Join Date: Feb 2009
Location: TALLAHASSEE,FL
Posts: 3,672
|
Thank you Tony for our rims. look super bad on the car takeing it racing in Feb. to Pony Wars. will send pics of rims having them put on today.
Forgestar CF5 rotary forged Gloss Black finish 18x11.0 +44 offset Thanks again, Willard & Milissa
__________________
|
|
|
|
|
|
#195 |
|
Tri-County Camaros
Drives: 2010 2SS/RS Join Date: Jun 2009
Location: St Pete
Posts: 1,495
|
Couple of questions
Will the stock rear tires fit on a 20x10 rim? Also, 275/30/20 nitto invos fit the rear stock rims? Sticky says 275/40 so not sure if 275/30 will work |
|
|
|
|
|
#196 |
|
Emerald Coast Camaros
Drives: 2010 2SS Rally Yellow Join Date: Feb 2009
Location: TALLAHASSEE,FL
Posts: 3,672
|
pics. of our new rims!!!!!
__________________
|
|
|
|
|
|
#197 |
![]() Drives: Chevy Camaro 2SS Join Date: Mar 2011
Location: Avon, IN
Posts: 25
|
Probably it has been answered and probably in this same thread, i have the factory 275's in the rear, my question is, if I change to 305's do i need to do any modification to fit them?
|
|
|
|
|
|
#198 |
![]() Drives: Ellie-1 Join Date: Jul 2011
Location: Farmington ,mo
Posts: 704
|
tag
__________________
|
|
|
|
|
|
#199 |
![]() |
I'm getting a 20x8.5 with 32 mm offset fronts and 20x10.5 30 mm offset rears what tire size should I go for and I want it to have a little stretch because my wheels would have a 3.5'' lip on the back and I think it would look really good.
__________________
"From ZERO to a Tire-Burning HERO!"
|
|
|
|
|
|
#200 | |
|
Envy
Drives: 2011 2SS/RS - SGM - Silver stripe Join Date: Aug 2011
Location: Renton, WA
Posts: 445
|
Quote:
|
|
|
|
|
![]() |
| Thread Tools | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| CAMARO WIKI | Tran | Wiki | 42 | 05-18-2013 09:32 AM |
| Drag Racing Suspension Kits | Info@PeddersUSA.com | Suspension / Chassis / Brakes | 25 | 02-21-2010 08:48 PM |
| The Camaro, what it has come to mean for me | Number 3 | 5th Gen Camaro SS LS LT General Discussions | 23 | 04-13-2009 09:31 PM |
| Answeres to questions I have stumbled on | dieseldave24v | 5th Gen Camaro SS LS LT General Discussions | 13 | 02-23-2009 06:56 PM |