SLP supercharger? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bikerdan · 06-25-2012, 03:19 PM

Anyone running the stage 1 SLP? I know it's TVS based- but they say the rest is made by them.

ceyl · 06-25-2012, 03:27 PM

I have one. Installed at the dealer. Only 1500 miles but no issues so far. I do know the warrenty card is sent to Magnuson. Not sure what part SLP makes. The outside is cast differently than the Magnuson but everything else looks the same.

bikerdan · 06-25-2012, 03:33 PM

Quote:

Originally Posted by ceyl

I have one. Installed at the dealer. Only 1500 miles but no issues so far. I do know the warrenty card is sent to Magnuson. Not sure what part SLP makes. The outside is cast differently than the Magnuson but everything else looks the same.

It looked the same to me too, but they said they used an Eaton bottom and made the rest. I looks like a nice unit and I plan on getting one..

ceyl · 06-25-2012, 03:47 PM

Here's mine.

trans665 · 06-25-2012, 04:20 PM

that is nice!!!!

bikerdan · 06-25-2012, 05:07 PM

I have an appointment to get mine tomorrow

Rat · 06-25-2012, 06:13 PM

Magnuson make them for SLP. Same thing as there's just new case.

bikerdan · 06-25-2012, 06:50 PM

Thats comforting to know, knowing Maggie's rep.
Thanks

06-25-2012, 03:19 PM	#1
bikerdan BLOWNSS Drives: 2011 SUPERCHARGED Camero SS Join Date: Dec 2010 Location: maryland Posts: 147	SLP supercharger? Anyone running the stage 1 SLP? I know it's TVS based- but they say the rest is made by them. __________________ 2011 LS3 SS/RS, M6, Maggie TVS2300 - cog drive, CAI, BEHE Performance tune , boost and AFR gages, LS7 clutch,Billet Hurst shifter, SLP long tube headers with high flow cats, Flowmaster Pro ex., Pfadt trailing arms & bushings, Weld Racing wheels,Elite catch can, SLP hood, amp & sub.

06-25-2012, 03:27 PM	#2
ceyl Drives: 2012 2SS/RS M6 Join Date: Apr 2012 Location: Colorado Posts: 36	I have one. Installed at the dealer. Only 1500 miles but no issues so far. I do know the warrenty card is sent to Magnuson. Not sure what part SLP makes. The outside is cast differently than the Magnuson but everything else looks the same. __________________ SLP TVS 2300, Kooks Long Tubes, Magnaflow 3" comp, BAP, Rotofab CAI, RX catch can, valve cover breather and 3.4" SC Pulley.

06-25-2012, 03:47 PM	#4
ceyl Drives: 2012 2SS/RS M6 Join Date: Apr 2012 Location: Colorado Posts: 36	Here's mine. Attached Images __________________ SLP TVS 2300, Kooks Long Tubes, Magnaflow 3" comp, BAP, Rotofab CAI, RX catch can, valve cover breather and 3.4" SC Pulley.

06-25-2012, 05:07 PM	#6
bikerdan BLOWNSS Drives: 2011 SUPERCHARGED Camero SS Join Date: Dec 2010 Location: maryland Posts: 147	I have an appointment to get mine tomorrow __________________ 2011 LS3 SS/RS, M6, Maggie TVS2300 - cog drive, CAI, BEHE Performance tune , boost and AFR gages, LS7 clutch,Billet Hurst shifter, SLP long tube headers with high flow cats, Flowmaster Pro ex., Pfadt trailing arms & bushings, Weld Racing wheels,Elite catch can, SLP hood, amp & sub.

06-25-2012, 06:13 PM	#7
Rat Drives: TBSS/COPO Join Date: Apr 2012 Location: Colorado Posts: 194	Magnuson make them for SLP. Same thing as there's just new case. __________________ .....TBSS 700rwhp 853rwtq................................ 2012 COPO #33....... ..4L85E TVS2300,418@17psi...............................NA 427, POWERGLIDE.. ..11.02@123mph 7000 DA....................................9.84@139.8 1350 DA. ..........

06-25-2012, 04:20 PM	#5
trans665 Drives: 2010 2ss Join Date: May 2011 Location: corpus christi Posts: 316	that is nice!!!!

06-25-2012, 06:50 PM	#8
bikerdan BLOWNSS Drives: 2011 SUPERCHARGED Camero SS Join Date: Dec 2010 Location: maryland Posts: 147	Thats comforting to know, knowing Maggie's rep. Thanks __________________ 2011 LS3 SS/RS, M6, Maggie TVS2300 - cog drive, CAI, BEHE Performance tune , boost and AFR gages, LS7 clutch,Billet Hurst shifter, SLP long tube headers with high flow cats, Flowmaster Pro ex., Pfadt trailing arms & bushings, Weld Racing wheels,Elite catch can, SLP hood, amp & sub.