new door speakers - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

bigted83 · 07-08-2012, 11:15 AM

Im thinking of getting new door speakers, I already have the Boston acoustics stereo the first one they put in the early build ones. Im stuck between either just putting alpine sps-610c's in or having a Kenwood components out in and power every speaker with a 760 watt kenwood amp and that install is going to cost me like 750 bucks and thats new new speaker wire and everything. Which I want to and then dont want to do. What would be best ? The stereo shop would has layaway and everything. Would the factory amp power the alpines efficiently enough.I do have the harness that subthump makes were u can add a higher power amp with me. Which would be best

darkrider01 · 07-08-2012, 11:53 AM

I would suggest starting with replacing the amp. The amp is the real weak spot in the BA system. If the amp alone does not satisfy your needs, then start replacing speakers. Replacing the BA speakers is a good idea, but the amp should really be the first thing to go if you're working on a budget.

It's like this: The BA system is like serving you poop on an aluminum plate. The poop is the sound from the amp. Replacing speakers is like just replacing the plate. You're still going to be eating poop.

KMPrenger · 07-08-2012, 12:13 PM

So what is a good....not super expensive amp replacement that fits in the stock location? I think I've read about some suggestions from SubThump before, but I'm always open for more ideas lol.

Also, what are the chances of shortening the life, or blowing the stock speakers by replaceing the stock amp?

The last thing I want to do is blow a rear speaker because I've read its a real PITA to change those out.

bigted83 · 07-08-2012, 12:18 PM

Lol, ill start with the amp

CrutchfieldBrooke · 07-08-2012, 12:21 PM

Quote:

Originally Posted by darkrider01

I would suggest starting with replacing the amp. The amp is the real weak spot in the BA system. If the amp alone does not satisfy your needs, then start replacing speakers. Replacing the BA speakers is a good idea, but the amp should really be the first thing to go if you're working on a budget.

It's like this: The BA system is like serving you poop on an aluminum plate. The poop is the sound from the amp. Replacing speakers is like just replacing the plate. You're still going to be eating poop.

Haha, I like how you put it.....but I totally agree. Start with the amp and build on to the system from there. Even if you want to add the Alpine component speakers later, they will sound much better on a new amp.

bigted83 · 07-08-2012, 12:23 PM

To crutchfieldbrook, are the alpine sps-610I'd any good

CrutchfieldBrooke · 07-08-2012, 12:33 PM

Hey Ted, if you are looking for a good component speaker at a reasonable price, the Alpine will be a good choice. They don't give you a ton on the really low end, but will be good for mids and highes in the system and compliment a sub well. There are quite a few reviews on our site.

http://www.crutchfield.com/I-rCHVc11...=610c&skipvs=T

bigted83 · 07-08-2012, 02:36 PM

Thx,I got subs already so ill be ordering those soon

CrutchfieldBrooke · 07-08-2012, 02:46 PM

You're very welcome.

murdered · 07-09-2012, 09:13 AM

Are there any 5-channel amps that will fit in the factory location? Or do they all need to be mounted elsewhere?

bigted83 · 07-11-2012, 07:15 AM

Is it Tru Boston is getting out of making car audio equipment

CrutchfieldBrooke · 07-11-2012, 08:56 AM

Quote:

Originally Posted by bigted83

Is it Tru Boston is getting out of making car audio equipment

Yes, it is true that they have stopped making aftermarket car equipment. They are still in business, just not doing car audio any more.

bigted83 · 07-11-2012, 10:08 AM

That sux

skar · 07-11-2012, 10:18 AM

Changed to a JL amp made a big differance .

Iwantone2 · 07-11-2012, 04:09 PM

Not sure about a 5-channel amp, but for sure the JL Audio XD400/4 will fit in the stock location where the BA amp is. I've had the JL amp for over a year now, and I've been extremely happy with it. I also upgraded the front components and rear speakers to Alpine Type-R's

CrutchfieldBrooke · 07-12-2012, 08:18 AM

Love those JL amps!

pnyklr · 07-12-2012, 01:58 PM

I posted this question awhile back regarding 5 channel amps in the stock location.

http://www.camaro5.com/forums/showthread.php?t=206942

-Funk

Kevinshawnm · 07-12-2012, 03:02 PM

I believe a bracket can be fabricated to make the JL HD900/5 fit.

07-08-2012, 11:15 AM	#1
bigted83 They call me captain slow Drives: 2010 camaro lt Join Date: Jun 2010 Location: Springfield Illinois Posts: 1,207	new door speakers Im thinking of getting new door speakers, I already have the Boston acoustics stereo the first one they put in the early build ones. Im stuck between either just putting alpine sps-610c's in or having a Kenwood components out in and power every speaker with a 760 watt kenwood amp and that install is going to cost me like 750 bucks and thats new new speaker wire and everything. Which I want to and then dont want to do. What would be best ? The stereo shop would has layaway and everything. Would the factory amp power the alpines efficiently enough.I do have the harness that subthump makes were u can add a higher power amp with me. Which would be best

07-08-2012, 11:53 AM	#2
darkrider01 Deaf Audiophile Drives: 2010 IBM 2SS/RS, 2013 Avalanche LTZ Join Date: Jun 2011 Location: Garner, NC Posts: 552	I would suggest starting with replacing the amp. The amp is the real weak spot in the BA system. If the amp alone does not satisfy your needs, then start replacing speakers. Replacing the BA speakers is a good idea, but the amp should really be the first thing to go if you're working on a budget. It's like this: The BA system is like serving you poop on an aluminum plate. The poop is the sound from the amp. Replacing speakers is like just replacing the plate. You're still going to be eating poop. __________________ My amplifier pop/click/thump solution thread Power Mods * K&N Typhoon CAI, Flowmaster American Thunder cat-back exhaust, Hurst Short Throw Shifter Visual Mods * Black Phantom Grille Audio Mods * Stinger SPP 2250 Battery * Pioneer AVH-P8400BH * Scosche Dash Kit * Rockford Fosgate 3Sixty.3 * Rockford Fosgate Power T1000-1bdCP * 2-JL Audio 13W6v2 * Rockford Fosgate Power T800-4AD * Focal 165KRX2 Power (active) * Rockford Fosgate Power T400-4 * Rockford Fosgate Power T1692

07-08-2012, 12:13 PM	#3
KMPrenger Drives: '10 ABM LT/RS, 01 Ford Ranger Join Date: May 2009 Location: Jefferson City, Missouri Posts: 7,163	So what is a good....not super expensive amp replacement that fits in the stock location? I think I've read about some suggestions from SubThump before, but I'm always open for more ideas lol. Also, what are the chances of shortening the life, or blowing the stock speakers by replaceing the stock amp? The last thing I want to do is blow a rear speaker because I've read its a real PITA to change those out. __________________ Shes ALL MINE! - 8/24/2009 2G1FB1EV2A9133373 Custom Magnaflow Exhaust, Vararam intake, MACE Ported Intake Manifold, RX Ported TB, RX "Black Ice" manifold insulator, Mike Norris Catch Can, ZL1 reproduction wheels, DRL Harness, Heritage grill, Street Scene lower grill, NLP Spoiler, ZL1 rockers, Switchblade silver interior, Defenderworx sills, and more!

07-09-2012, 09:13 AM	#10
murdered Drives: 2012 2SS 45th Ann. Edition Join Date: Jun 2012 Location: Minneapolis, MN Posts: 74 View My Garage	Are there any 5-channel amps that will fit in the factory location? Or do they all need to be mounted elsewhere? __________________ 2012 2SS 45th Anniversary Edition

07-11-2012, 10:18 AM	#14
skar Drives: 2010 2SSRS headers/CAI/tune/corsa, Join Date: May 2010 Location: Commerce twp Michigan Posts: 1,293	Changed to a JL amp made a big differance . __________________ Stainless works headers/cats Roto fab CAI / Corsa and install and tune Livernois TSW Nuburgring 9 &10" x20 on Invos JL Audio XD400/4 amp Pfadt trailing arms & tie rods sway bars. pedders street 1 package

07-08-2012, 12:18 PM	#4
bigted83 They call me captain slow Drives: 2010 camaro lt Join Date: Jun 2010 Location: Springfield Illinois Posts: 1,207	Lol, ill start with the amp

07-08-2012, 12:23 PM	#6
bigted83 They call me captain slow Drives: 2010 camaro lt Join Date: Jun 2010 Location: Springfield Illinois Posts: 1,207	To crutchfieldbrook, are the alpine sps-610I'd any good

07-08-2012, 12:33 PM	#7
CrutchfieldBrooke Drives: 2010 Camaro, 1968 Camaro Join Date: Apr 2012 Location: Norton, VA Posts: 333	Hey Ted, if you are looking for a good component speaker at a reasonable price, the Alpine will be a good choice. They don't give you a ton on the really low end, but will be good for mids and highes in the system and compliment a sub well. There are quite a few reviews on our site. http://www.crutchfield.com/I-rCHVc11...=610c&skipvs=T

07-08-2012, 02:36 PM	#8
bigted83 They call me captain slow Drives: 2010 camaro lt Join Date: Jun 2010 Location: Springfield Illinois Posts: 1,207	Thx,I got subs already so ill be ordering those soon

07-08-2012, 02:46 PM	#9
CrutchfieldBrooke Drives: 2010 Camaro, 1968 Camaro Join Date: Apr 2012 Location: Norton, VA Posts: 333	You're very welcome.

07-11-2012, 07:15 AM	#11
bigted83 They call me captain slow Drives: 2010 camaro lt Join Date: Jun 2010 Location: Springfield Illinois Posts: 1,207	Is it Tru Boston is getting out of making car audio equipment

07-11-2012, 10:08 AM	#13
bigted83 They call me captain slow Drives: 2010 camaro lt Join Date: Jun 2010 Location: Springfield Illinois Posts: 1,207	That sux

07-11-2012, 04:09 PM	#15
Iwantone2 Pinche Team Leader Drives: CGM 1SS RS Join Date: Feb 2009 Location: OC Cali Posts: 9,163 View My Garage	Not sure about a 5-channel amp, but for sure the JL Audio XD400/4 will fit in the stock location where the BA amp is. I've had the JL amp for over a year now, and I've been extremely happy with it. I also upgraded the front components and rear speakers to Alpine Type-R's __________________

07-12-2012, 08:18 AM	#16
CrutchfieldBrooke Drives: 2010 Camaro, 1968 Camaro Join Date: Apr 2012 Location: Norton, VA Posts: 333	Love those JL amps!

07-12-2012, 01:58 PM	#17
pnyklr Drives: A Gift From My Wife Join Date: Apr 2009 Location: Powder Springs, GA Posts: 1,435	I posted this question awhile back regarding 5 channel amps in the stock location. http://www.camaro5.com/forums/showthread.php?t=206942 -Funk __________________ 2012 Convert 2SS/RS SW/IO LS3 - Build #1081 07/21/2011 - (3800) Order produced and vehicle is being prepared for shipping. 08/09/2011 - (4200) Shipped (vehicle is shipped to the dealer or interim point of delivery). 08/16/2011 - (5000) Vehicle has been delivered to dealer. 08/19/2011 - In my possession.

07-12-2012, 03:02 PM	#18
Kevinshawnm Biggz Drives: 2010 Camaro 2SS L99 Rally Yellow Join Date: Jul 2011 Location: Richmond, Indiana Posts: 529	I believe a bracket can be fabricated to make the JL HD900/5 fit.