RPM 4l80 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

markssylver · 05-10-2012, 09:18 PM

I have a brand new RPM 4l80 with transbrakedPCS 2000 controller and dss aluminium one piece d/s with billet slip yoke also have factory auto shifter assembly only thing missing for conversion is a flywheel and convert or looking to get 4500 obo for everything

JLE58 · 05-10-2012, 09:46 PM

What Level tranny is it?

markssylver · 05-19-2012, 02:39 PM

It is a level 5 trans dropping price to 4500 plus shipping

The 2010 Sin · 05-19-2012, 07:49 PM

Damn.. Id love to be in an auto and out of this 6060... Bump for a great deal

HufferSS · 05-19-2012, 09:01 PM

Yep that's a good deal. Level 7 I think is there best but any reasonably built 4L80 will take a lot of power through it.

JLE58 · 05-20-2012, 10:18 AM

I believe Rpm rates their level 5 at 1200 hp.

markssylver · 05-23-2012, 09:20 AM

bump

markssylver · 05-28-2012, 09:42 PM

Ttt

markssylver · 06-05-2012, 07:38 PM

Bump

markssylver · 06-10-2012, 05:43 PM

Price drop 4500 shipped

markssylver · 06-17-2012, 01:09 PM

Ttt

markssylver · 06-26-2012, 08:36 PM

Ttt

Genevieve · 06-27-2012, 02:00 AM

How many miles or was it never installed? Why the change of heart? When was original purchase?

markssylver · 06-27-2012, 09:08 AM

it was never installed i changed my mind about beause i am going to buy a cts v in an auto so i figured id keep the camaro a m6 i origionally purchased it last december

Genevieve · 06-27-2012, 11:26 AM

does this have the upgraded sprag or not?

JLE58 · 07-05-2012, 08:44 AM

Pretty sure they come with the hd 34 element sprag.

Genevieve · 07-05-2012, 02:09 PM

They dont come with the HD sprag its an option last I talked to RPM. I was told this 4l80 does not have the Upgraded sprag and is rated for 1000 not 1200.

JLE58 · 07-05-2012, 08:28 PM

Level 5 was rated for 1200 hp last I talked them and that was in person.34 element sprag is pretty standard. This is a good price for everything for sure.

Genevieve · 07-05-2012, 11:48 PM

They are rated for 1200 with the hd sprag. You can get without the hd sprag and it's rated for 1000. The sprag is another 400+ which takes the 4l80e cost from 3600 ish to 4100 ish. As I stated earlier this does not have the hd sprag, ergo this is rated from rpm at 1000.

JLE58 · 07-06-2012, 06:32 AM

I'm just telling you what rpm told me face to face.

Genevieve · 07-06-2012, 09:20 AM

As of 6-27-2012, when I spoke to rpm personally in regards to buying this very transmission, this is how it was explained to me but I guess they could have changed things since then.

markssylver · 07-10-2012, 12:58 AM

Ttt

markssylver · 07-21-2012, 10:43 AM

Bump

AUS10BMX · 07-23-2012, 08:35 PM

PM'ed

g8lover · 09-27-2012, 03:13 PM

Sold yet?... contact me if not sold... thanks

05-10-2012, 09:18 PM	#1
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	RPM 4l80 I have a brand new RPM 4l80 with transbrakedPCS 2000 controller and dss aluminium one piece d/s with billet slip yoke also have factory auto shifter assembly only thing missing for conversion is a flywheel and convert or looking to get 4500 obo for everything __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ Last edited by markssylver; 06-23-2012 at 02:39 PM.

05-19-2012, 02:39 PM	#3
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	It is a level 5 trans dropping price to 4500 plus shipping __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ

05-19-2012, 07:49 PM	#4
The 2010 Sin CorkTulsa.com Drives: 2010 2SS BLK, 2013 2SS CRT Join Date: Feb 2010 Location: Tulsa, Oklahoma Posts: 2,809	Damn.. Id love to be in an auto and out of this 6060... Bump for a great deal __________________

05-19-2012, 09:01 PM	#5
HufferSS I Wanna Go Faster!! Drives: 2011 2SS Synergy Green M6 Join Date: Apr 2011 Location: SC Posts: 3,339	Yep that's a good deal. Level 7 I think is there best but any reasonably built 4L80 will take a lot of power through it. __________________ Built by Vengeance Racing 9.31@154.81 mph Procharger F1-X RPM Level 7 4L80e + Coan Converter Hendrix 9" Rear Axle + 3.50 Gear ARH 2" LTs+3.5" Exhaust Fore Fuel System, Bogarts + Hoosier Slicks Pfadt Drag Pack Suspension My Build Thread \| Best Pass To Date

05-23-2012, 09:20 AM	#7
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	bump __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ

05-10-2012, 09:46 PM	#2
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,077	What Level tranny is it?

05-20-2012, 10:18 AM	#6
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,077	I believe Rpm rates their level 5 at 1200 hp.

05-28-2012, 09:42 PM	#8
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	Ttt __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ

06-05-2012, 07:38 PM	#9
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	Bump __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ

06-10-2012, 05:43 PM	#10
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	Price drop 4500 shipped __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ

06-17-2012, 01:09 PM	#11
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	Ttt __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ

06-26-2012, 08:36 PM	#12
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	Ttt __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ

06-27-2012, 02:00 AM	#13
Genevieve Drives: 2SS/RS Join Date: Jul 2009 Location: St. louis Posts: 160	How many miles or was it never installed? Why the change of heart? When was original purchase?

06-27-2012, 09:08 AM	#14
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	it was never installed i changed my mind about beause i am going to buy a cts v in an auto so i figured id keep the camaro a m6 i origionally purchased it last december __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ

06-27-2012, 11:26 AM	#15
Genevieve Drives: 2SS/RS Join Date: Jul 2009 Location: St. louis Posts: 160	does this have the upgraded sprag or not?

07-05-2012, 08:44 AM	#16
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,077	Pretty sure they come with the hd 34 element sprag.

07-05-2012, 02:09 PM	#17
Genevieve Drives: 2SS/RS Join Date: Jul 2009 Location: St. louis Posts: 160	They dont come with the HD sprag its an option last I talked to RPM. I was told this 4l80 does not have the Upgraded sprag and is rated for 1000 not 1200.

07-05-2012, 08:28 PM	#18
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,077	Level 5 was rated for 1200 hp last I talked them and that was in person.34 element sprag is pretty standard. This is a good price for everything for sure.

07-05-2012, 11:48 PM	#19
Genevieve Drives: 2SS/RS Join Date: Jul 2009 Location: St. louis Posts: 160	They are rated for 1200 with the hd sprag. You can get without the hd sprag and it's rated for 1000. The sprag is another 400+ which takes the 4l80e cost from 3600 ish to 4100 ish. As I stated earlier this does not have the hd sprag, ergo this is rated from rpm at 1000.

07-06-2012, 06:32 AM	#20
JLE58 Drives: CGM,twin turbo, cam 2010 SS/RS Join Date: Mar 2011 Location: ROCKMART, GA Posts: 2,077	I'm just telling you what rpm told me face to face.

07-06-2012, 09:20 AM	#21
Genevieve Drives: 2SS/RS Join Date: Jul 2009 Location: St. louis Posts: 160	As of 6-27-2012, when I spoke to rpm personally in regards to buying this very transmission, this is how it was explained to me but I guess they could have changed things since then.

07-10-2012, 12:58 AM	#22
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	Ttt __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ

07-21-2012, 10:43 AM	#23
markssylver Drives: 95 bbb impala ss Join Date: Apr 2009 Location: md Posts: 330	Bump __________________ 10.56@134mph ADM BUILT AND TUNED CGM 2SS RS ADM/LPE 417 with ported heads/inconel vavles gt11 cam ADM ported maggie with 14 rib rear 10 rib front pulleys ADM fuel system and race air intake ADM/LPE ZR1 clutch /pedalreturn spring ADM billet aluminum valve covers /RPM LEVEL 6 TR6060 LPE HD 241mm diff with 3:45 gears HD axles and d/s ADM widened wheels with 315nitto nt05s Bogart 17 dragwheels CTS-V front 6 piston brakes Pedders HD subframe/differential bushings alignment kit 27/32mm sways Supercar coilovers 683RWHP/650RWTQ

07-23-2012, 08:35 PM	#24
AUS10BMX Drives: 2010 2LT RY Join Date: Nov 2009 Location: Greenville, NC Posts: 1,218 View My Garage	PM'ed __________________ Hypertech \| Airaid \| JBA Exhaust \| RX Catch Can/CNC TB/Black Ice-Olator \| Ported Intake/Heads \| R1 D/S Rotors \| 20" RS Polished \| RS Headlights

09-27-2012, 03:13 PM	#25
g8lover Drives: Pontiac G8 GT Join Date: Jan 2011 Location: Toledo Posts: 33	Sold yet?... contact me if not sold... thanks __________________ Nothing special- Pontiac G8 Gt; LSX 434 with Procharger F1d ; 22psi; 4L80E conversion; Hendrix 9" rear; Hendrix one pc driveshaft; Camaro brembos; Etc..... Etc..... stock looking....