Jacksonville Camaro Club - Page 446 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ZO6 KLLR · 07-23-2012, 05:54 PM

Ya we should have our muffler bearings looked at with all that noise.

Addiction · 07-23-2012, 07:09 PM

Quote:

Originally Posted by ZO6 KLLR

Ya we should have our muffler bearings looked at with all that noise.

Muffler?? What are these mufflers you speak of??

Addiction · 07-23-2012, 07:11 PM

Quote:

Originally Posted by bluetooth-ss

Just a nice little stroll across town.

We even stopped and picked flowers

bluetooth-ss · 07-23-2012, 07:33 PM

Lol

dcarlos55 · 07-24-2012, 02:56 PM

I just spent the last 6 hours with the polisher and the Adams polish/wax. The difference is absolutely amazing. No more prism effect in the sun from the swirl marks. I believe the car is ready for the trip to Indy now.

If you haven't tried the Adams products, you're missing out on some great stuff.

jhart711 · 07-24-2012, 05:05 PM

So whats the plan for this weekend?

How about T&T at SGMP??

R8E1D · 07-24-2012, 07:22 PM

[QUOTE=dcarlos55;5337957]I just spent the last 6 hours with the polisher and the Adams polish/wax. The difference is absolutely amazing. No more prism effect in the sun from the swirl marks. I believe the car is ready for the trip to Indy now.

If you haven't tried the Adams products, you're missing out on some great stuff.[/QUOTE

I just got my kit yesterday wanna come do mine?

Kyne · 07-24-2012, 08:11 PM

I was going to wait to post these but I figured I would get some opinions from Camaro owners on it. This is the prototype mold for the Camaro so once I mold it I will install and adjust the mold. The plastic will be thermoformed over it so it will be a little bigger than the wood piece. Once I figure out what will be production I will cast it in aluminum. I know there are quite a few on the market for these cars unlike the other platforms I work with.

5th gen Camaro ss splitter.

And also the new G8 mold I've been working on.
G8 splitter

Both prototypes should be ready by this weekend.

dcarlos55 · 07-24-2012, 08:57 PM

[QUOTE=R8E1D;5339331]

Quote:

Originally Posted by dcarlos55

I just spent the last 6 hours with the polisher and the Adams polish/wax. The difference is absolutely amazing. No more prism effect in the sun from the swirl marks. I believe the car is ready for the trip to Indy now.

If you haven't tried the Adams products, you're missing out on some great stuff.[/QUOTE

I just got my kit yesterday wanna come do mine?

One was enough for now. I've only been putting it off since March because I was paranoid of screwing up.

I'll be happy to come around there and provide moral support while you do yours though. At least you can get yours in the garage to do it. Mine had to sit in the driveway in the sun.

Addiction · 07-24-2012, 09:10 PM

Quote:

Originally Posted by Kyne

I was going to wait to post these but I figured I would get some opinions from Camaro owners on it. This is the prototype mold for the Camaro so once I mold it I will install and adjust the mold. The plastic will be thermoformed over it so it will be a little bigger than the wood piece. Once I figure out what will be production I will cast it in aluminum. I know there are quite a few on the market for these cars unlike the other platforms I work with.

5th gen Camaro ss splitter.

And also the new G8 mold I've been working on.
G8 splitter

Both prototypes should be ready by this weekend.

Looks good!

Addiction · 07-24-2012, 09:15 PM

Quote:

Originally Posted by jhart711

So whats the plan for this weekend?

How about T&T at SGMP??

Not going to be able to make it this weekend. Have to work.

Addiction · 07-24-2012, 09:16 PM

Oct 27 1/2 mile drag racing!!

http://www.wannagofast.com/carrabelle.php

What do you guys think?? Cruise over Friday night and race Saturday then drive home.

Jchaluja · 07-25-2012, 07:38 AM

I'm in.....

R8E1D · 07-25-2012, 02:14 PM

[QUOTE=dcarlos55;5339832]

Quote:

Originally Posted by R8E1D

One was enough for now. I've only been putting it off since March because I was paranoid of screwing up.

I'll be happy to come around there and provide moral support while you do yours though. At least you can get yours in the garage to do it. Mine had to sit in the driveway in the sun.

Sweet man, I'm going to do the pilot tonight and Gabby Friday.

07-23-2012, 05:54 PM	#6231
ZO6 KLLR Drives: A little garden snake Join Date: Jun 2010 Location: Jax Posts: 31	Ya we should have our muffler bearings looked at with all that noise. __________________

07-23-2012, 07:33 PM	#6234
bluetooth-ss Drives: 2010 ABM 2SS/RS A6 and 2018 2500 Join Date: Sep 2010 Location: FLORIDA Posts: 2,069	Lol __________________ BLUETOOTH-SS

07-24-2012, 02:56 PM	#6235
dcarlos55 Drives: 2017 HBM A10 ZL1 Join Date: Feb 2011 Location: Jacksonville FL Posts: 1,205	I just spent the last 6 hours with the polisher and the Adams polish/wax. The difference is absolutely amazing. No more prism effect in the sun from the swirl marks. I believe the car is ready for the trip to Indy now. If you haven't tried the Adams products, you're missing out on some great stuff. __________________ My build thread http://www.camaro5.com/forums/showthread.php?t=224342 Go is good. Stop is better.

07-24-2012, 05:05 PM	#6236
jhart711 Drives: 2010 yellow 2 SS Join Date: Dec 2009 Location: jacksonville fl Posts: 241	So whats the plan for this weekend? How about T&T at SGMP?? __________________ Hartley Automotive & Performance

07-24-2012, 09:16 PM	#6242
Addiction It's not just a hobby! Drives: 2010 2SS/RS Join Date: Apr 2010 Location: Jax, FL. Posts: 1,498	Oct 27 1/2 mile drag racing!! http://www.wannagofast.com/carrabelle.php What do you guys think?? Cruise over Friday night and race Saturday then drive home. __________________ For sale! http://www.camaro5.com/forums/showthread.php?t=325366

07-24-2012, 07:22 PM	#6237
R8E1D Drives: 2013 Ram 1500 Join Date: Nov 2011 Location: JAX, FL Posts: 278	[QUOTE=dcarlos55;5337957]I just spent the last 6 hours with the polisher and the Adams polish/wax. The difference is absolutely amazing. No more prism effect in the sun from the swirl marks. I believe the car is ready for the trip to Indy now. If you haven't tried the Adams products, you're missing out on some great stuff.[/QUOTE I just got my kit yesterday wanna come do mine?

07-24-2012, 08:11 PM	#6238
Kyne Drives: 2006 GTO Join Date: Jul 2012 Location: Jax, Fl Posts: 2	I was going to wait to post these but I figured I would get some opinions from Camaro owners on it. This is the prototype mold for the Camaro so once I mold it I will install and adjust the mold. The plastic will be thermoformed over it so it will be a little bigger than the wood piece. Once I figure out what will be production I will cast it in aluminum. I know there are quite a few on the market for these cars unlike the other platforms I work with. 5th gen Camaro ss splitter. And also the new G8 mold I've been working on. G8 splitter Both prototypes should be ready by this weekend.

07-25-2012, 07:38 AM	#6243
Jchaluja Drives: ZL1 Camaro Join Date: Feb 2009 Location: Jacksonville, FL Posts: 1,321	I'm in.....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
New Camaro Exterior and Interior Stainless Steel Trim Parts from RPI Designs!	RPI Designs	Cosmetics and Lighting Modification Discussions	36	04-02-2020 05:32 PM
Gran Turismo 5... No Camaro?	5thGenOwner	5th Gen Camaro SS LS LT General Discussions	111	12-06-2011 10:06 AM
Think about this and the Z28 5th gen	13F20	Camaro ZL1 Forum - ZL1 Specific Topics	41	09-04-2010 12:59 AM
GM memo to dealers	Moose	5th Gen Camaro SS LS LT General Discussions	41	02-04-2010 07:33 PM
Answeres to questions I have stumbled on	dieseldave24v	5th Gen Camaro SS LS LT General Discussions	13	02-23-2009 06:56 PM