Changing colors in you LED's for your ABL - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

MikeMoach · 07-29-2012, 08:38 PM

Quote:

Originally Posted by monstertodd

I'd like to do this mod as well. Anyone have a good source for 5mm leds?

This

Caddyroger · 07-29-2012, 08:58 PM

Quote:

Originally Posted by monstertodd

I'd like to do this mod as well. Anyone have a good source for 5mm leds?

This is a site that a lot us use.

Oznium.com

MikeMoach · 07-30-2012, 05:26 AM

I'm a plumber by trade nd I'm having a real hard time following all this electrical talk :( I'm Gunna b taking my door panels off soon nd rly wanna do everything 1 time, so if there is a way someone can simplify the LEDs I need to do the door ABL nd window LEDs I wud greatly appreciate it

monstertodd · 07-30-2012, 12:44 PM

I think you can use these, but I'm not 100% sure. It says they come with resistors pre-wired, but it doesn't say what rate resistor comes installed.

http://www.oznium.com/prewired-leds

You'll need 5mm LED's to change your door panel ABL color.

2SS/RS are these the LED's that we can use to change color in the door panel ABL?

MikeMoach · 07-30-2012, 07:48 PM

Quote:

Originally Posted by monstertodd

I think you can use these, but I'm not 100% sure. It says they come with resistors pre-wired, but it doesn't say what rate resistor comes installed.

http://www.oznium.com/prewired-leds

You'll need 5mm LED's to change your door panel ABL color.

2SS/RS are these the LED's that we can use to change color in the door panel ABL?

Thk u someone gave me this link b4 but wasn't sure jus like u, if I can get someone to confirm these r the ones I'll get 10 lol

2SSRS · 07-30-2012, 11:48 PM

Guys i will reply as soon as i stop for the night, on the road for CF3, yes it will fit.

WCoolBreeze · 07-31-2012, 12:18 AM

Ofer, drive Safe my friend. Plus, have a Blast!!!!!

Walt B.

MikeMoach · 07-31-2012, 08:31 AM

Will I need 5mm LEDs for the window buttons also??

2SSRS · 07-31-2012, 08:35 PM

Quote:

Originally Posted by MikeMoach

Will I need 5mm LEDs for the window buttons also??

No there SMD's and i dont remamber the size.

MikeMoach · 08-01-2012, 04:56 PM

Ok let me get this all straight, I need two 5mm LEDs for the ABL on the doors, I need two SMDs for the window buttons but don't know the size, what about inside the 4 pack gauges? Is it the same as inside the speedo nd tach or an LED or SMD?

Caddyroger · 08-01-2012, 07:00 PM

Quote:

Originally Posted by MikeMoach

Ok let me get this all straight, I need two 5mm LEDs for the ABL on the doors, I need two SMDs for the window buttons but don't know the size, what about inside the 4 pack gauges? Is it the same as inside the speedo nd tach or an LED or SMD?

The 4 pack gauges will use 8 of these type leds. They are the same as the speed and tech.

http://www.oznium.com/plcc-2

MikeMoach · 08-01-2012, 07:14 PM

Quote:

Originally Posted by Caddyroger

The 4 pack gauges will use 8 of these type leds. They are the same as the speed and tech.

http://www.oznium.com/plcc-2

Thx man I appreciate it, does anyone kno of I DIY how to change the lights in the gauges? I got my console apart right now (painting it) so if I see how to do it I might jus do it all at one time

MikeMoach · 08-02-2012, 05:09 AM

Also does anyone kno Wat kind of lights r in the buttons on the steering wheel controls?

bigwayne3000 · 08-03-2012, 01:28 PM

Do they make 1 bulb that would although you to change thru multiple colors? Still waiting on getting new door panels since I own a LS before I do this mod. I am interested in having RGB door panels though as I am ordering RGB halos from FlashTech soon.

James@Flashtech · 08-03-2012, 01:49 PM

Quote:

Originally Posted by bigwayne3000

Do they make 1 bulb that would although you to change thru multiple colors? Still waiting on getting new door panels since I own a LS before I do this mod. I am interested in having RGB door panels though as I am ordering RGB halos from FlashTech soon.

Smart man

MikeMoach · 08-04-2012, 05:18 AM

Anyone kno Wat type of light r in the steering wheel controls?

MikeMoach · 08-09-2012, 04:08 PM

MikeMoach · 08-16-2012, 06:53 AM

Anybody?

2SSRS · 08-16-2012, 08:00 AM

Yes, there small LED's i think its (PLCC2)

MikeMoach · 08-16-2012, 08:05 AM

Thank u how many will I need?

2SSRS · 08-16-2012, 08:49 AM

10 Pc

MikeMoach · 08-16-2012, 11:41 AM

Just to make sure, the steering wheel lights are the same as the gauge cluster and speedo?

MikeMoach · 08-22-2012, 05:30 PM

I ordered the 5mm LEDs you guys gave me the link to, so all I have to do is take the blue out and splice my red in? Is it that simple?

monstertodd · 08-22-2012, 05:46 PM

Quote:

Originally Posted by MikeMoach

I ordered the 5mm LEDs you guys gave me the link to, so all I have to do is take the blue out and splice my red in? Is it that simple?

I don't have first hand experience yet Mike, but it "should" be? If not, I mean, the old ones could be easily spliced back in.

What say ye Ofer?

MikeMoach · 08-22-2012, 06:11 PM

Quote:

Originally Posted by monstertodd

I don't have first hand experience yet Mike, but it "should" be? If not, I mean, the old ones could be easily spliced back in.

What say ye Ofer?

True but just want to go into this with more confidence then I have now cause I ain't got much right now lol

07-30-2012, 12:44 PM	#54
monstertodd Allyourbasearebelongtous Drives: 2010 Cyber Grey Metallic 2SS/RS M6 Join Date: Nov 2009 Location: Tega Cay, South Carolina Posts: 3,462 View My Garage	I think you can use these, but I'm not 100% sure. It says they come with resistors pre-wired, but it doesn't say what rate resistor comes installed. http://www.oznium.com/prewired-leds You'll need 5mm LED's to change your door panel ABL color. 2SS/RS are these the LED's that we can use to change color in the door panel ABL? __________________

07-30-2012, 11:48 PM	#56
2SSRS On a list for a 2014 Z28 Drives: 2010 Camaro 2SS M6 Join Date: Oct 2008 Location: By the lake in AZ Posts: 10,100 View My Garage	Guys i will reply as soon as i stop for the night, on the road for CF3, yes it will fit. __________________ My Build Thread E-mail Amigoop3@yahoo.com

07-31-2012, 12:18 AM	#57
WCoolBreeze 2LT/RS RJT Drives: 2010 2LT/RS RJT W/CGM Rally Stripes Join Date: Nov 2008 Location: Imperial, CA Posts: 1,093	Ofer, drive Safe my friend. Plus, have a Blast!!!!! Walt B. __________________ 2010 2LT/RS (Vin - 7757) 2005 Dodge Magnum R/T (Yes it has a Hemi) 1987 Camaro RS (California Special) Mods Done CGM Gills, "RS" in both headrests, GMPP Exhaust w/ Tips, RJT XM Antenna, RS Foglight/DRL Plug/Play Harness, Stow & Go Front Plate, Leather E-Brake Boot & Auto Boot, HUD Installed, Full ABL doors & Dash, RJT Heritage Grill, T-Rex Lower Grill, Roto-Fab CAI (RJT), W/W Reservoir, V-6 Radiator Cover (RJT), ADM Race Air Scoop, GM Cupholder & Footwell LEDs, Retrofit GM Rearview Mirror (w/video) & Backup Camera, and Conv Spoiler.

08-16-2012, 08:00 AM	#69
2SSRS On a list for a 2014 Z28 Drives: 2010 Camaro 2SS M6 Join Date: Oct 2008 Location: By the lake in AZ Posts: 10,100 View My Garage	Yes, there small LED's i think its (PLCC2) __________________ My Build Thread E-mail Amigoop3@yahoo.com

08-16-2012, 08:49 AM	#71
2SSRS On a list for a 2014 Z28 Drives: 2010 Camaro 2SS M6 Join Date: Oct 2008 Location: By the lake in AZ Posts: 10,100 View My Garage	10 Pc __________________ My Build Thread E-mail Amigoop3@yahoo.com

07-30-2012, 05:26 AM	#53
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 692	I'm a plumber by trade nd I'm having a real hard time following all this electrical talk :( I'm Gunna b taking my door panels off soon nd rly wanna do everything 1 time, so if there is a way someone can simplify the LEDs I need to do the door ABL nd window LEDs I wud greatly appreciate it

07-31-2012, 08:31 AM	#58
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 692	Will I need 5mm LEDs for the window buttons also??

08-01-2012, 04:56 PM	#60
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 692	Ok let me get this all straight, I need two 5mm LEDs for the ABL on the doors, I need two SMDs for the window buttons but don't know the size, what about inside the 4 pack gauges? Is it the same as inside the speedo nd tach or an LED or SMD?

08-02-2012, 05:09 AM	#63
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 692	Also does anyone kno Wat kind of lights r in the buttons on the steering wheel controls?

08-03-2012, 01:28 PM	#64
bigwayne3000 Drives: 2011 Camaro LS Join Date: Sep 2008 Location: NJ Posts: 1,296	Do they make 1 bulb that would although you to change thru multiple colors? Still waiting on getting new door panels since I own a LS before I do this mod. I am interested in having RGB door panels though as I am ordering RGB halos from FlashTech soon.

08-04-2012, 05:18 AM	#66
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 692	Anyone kno Wat type of light r in the steering wheel controls?

08-09-2012, 04:08 PM	#67
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 692

08-16-2012, 06:53 AM	#68
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 692	Anybody?

08-16-2012, 08:05 AM	#70
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 692	Thank u how many will I need?

08-16-2012, 11:41 AM	#72
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 692	Just to make sure, the steering wheel lights are the same as the gauge cluster and speedo?

08-22-2012, 05:30 PM	#73
MikeMoach Drives: 2010 RJT 2SS/RS Join Date: May 2012 Location: Staten Island, NY Posts: 692	I ordered the 5mm LEDs you guys gave me the link to, so all I have to do is take the blue out and splice my red in? Is it that simple?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How to Wire Footwell Lighting	TonyNo	Camaro DIY & HOW-TO instructions & discussions	716	05-07-2013 08:53 AM
Colors on Camaro you like...vs colors you hate...and a vote for ugliest color..hehe	chevydude26	5th Gen Camaro SS LS LT General Discussions	15	05-26-2010 09:00 PM
DIY: ABL Color Change	Tecca	Camaro DIY & HOW-TO instructions & discussions	20	05-18-2010 06:50 PM
hmm I think I am changing colors again	TaylorRyanSS	5th Gen Camaro SS LS LT General Discussions	19	05-21-2009 10:21 PM
Coolest new car colors	KILLER74Z28	General Automotive + Other Cars Discussion	8	04-12-2007 08:24 AM