Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Rick@Livernois
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > General Camaro Forums > Camaro ZL1 Forum - ZL1 Specific Topics

Camaro ZL1 Forum - ZL1 Specific Topics Camaro ZL1 specific topics

Reply
 
Thread Tools
Old 11-09-2012, 11:25 AM   #1
Jeff65SS
 
Jeff65SS's Avatar
 
Drives: 1965 Chevelle Malibu SS
Join Date: Sep 2012
Location: Georgia
Posts: 157
Lingenfelter 630 package... installed with dyno results. MTI Racing

I had the Lingenfelter 630 kit installed at MTI Racing in Marietta, GA. Attached is the dyno sheet. I notice that the baseline dyno was super low for a M6 car, however, the post-mod dyno is right where it should be. I have no explanation for the low dyno results initially



Mods include:
- 2.55 inch diameter steel supercharger drive pulley - powder coated black - 8 rib
- 8 rib serpentine belt
- Lingenfelter LS9 solid supercharger isolator coupling
- Port and polish supercharger snout
- Lingenfelter air intake duct
- K & N Air Filter
- 160 degree thermostat
- Increased boost level 10 - 12 psi or 3 - 4 psi over stock
- Professional engine modifications, testing & PCM tuning
- Chassis dyno report before & after installation

Last edited by Jeff65SS; 11-09-2012 at 12:56 PM.
Jeff65SS is offline   Reply With Quote
Old 11-09-2012, 11:27 AM   #2
ace32x
 
Drives: 2013 ZL1
Join Date: Oct 2012
Location: puyallup
Posts: 542
nice mods! a bet a bigger TB and heat exchanger would liven that up a bit more too
__________________
2013 victory red zl1, 2012 1500 silverado, 95 nissan 240sx 383 ls1 11:1 stroker dart 225 heads ms4 cam fast 102 manifold ;D
ace32x is offline   Reply With Quote
Old 11-09-2012, 11:50 AM   #3
69NMYSS

 
69NMYSS's Avatar
 
Drives: '69 Camaro SS and '12 ZL1
Join Date: Sep 2011
Location: CA
Posts: 1,274
Those end results seem a little low for a manual, although you started pretty low. With your mods i would have expected close to 600rwhp and 580rwtq? At least from all the other post/dynos I have seen with similar mods. Some M6 are getting close to 530rwtq STOCK, although the average is around 505-510. Also, with a 2.55" UP, you should be close to 13psi of boost
__________________
69NMYSS is offline   Reply With Quote
Old 11-09-2012, 12:06 PM   #4
ace32x
 
Drives: 2013 ZL1
Join Date: Oct 2012
Location: puyallup
Posts: 542
Quote:
Originally Posted by 69NMYSS View Post
Those end results seem a little low for a manual, although you started pretty low. With your mods i would have expected close to 600rwhp and 580rwtq? At least from all the other post/dynos I have seen with similar mods. Some M6 are getting close to 530rwtq STOCK, although the average is around 505-510. Also, with a 2.55" UP, you should be close to 13psi of boost
my guess is just dyno flucuations. cant imagine there being a 60 whp difference between bone stock cars XD
__________________
2013 victory red zl1, 2012 1500 silverado, 95 nissan 240sx 383 ls1 11:1 stroker dart 225 heads ms4 cam fast 102 manifold ;D
ace32x is offline   Reply With Quote
Old 11-09-2012, 12:15 PM   #5
KD Innovations
 
Drives: 2012 ZL1, 2009 CTS-V
Join Date: Jun 2011
Location: Staging Lanes
Posts: 463
Was thing an intake only pull?
KD Innovations is offline   Reply With Quote
Old 11-09-2012, 12:34 PM   #6
Jeff65SS
 
Jeff65SS's Avatar
 
Drives: 1965 Chevelle Malibu SS
Join Date: Sep 2012
Location: Georgia
Posts: 157
Quote:
Originally Posted by KD Innovations View Post
Was thing an intake only pull?
Not that I am aware of.
Jeff65SS is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:43 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.