Davenport Motorsports 690hp ZL1 Package all finished - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Davenport · 11-23-2012, 12:01 PM

Upgrades include LPE ported/polished supercharger inlet with pinned smaller pulley and solid coupler, Roto-fab air intake, LPE 10% overdrive balancer/pulley assembly, American Racing long tube headers with cats, MSD spark plug wires with heat sleeves and custom in-house tuning.

This is a 6spd Automatic equipped version.

Stephen12ZL1 · 11-23-2012, 03:41 PM

stock injectors?

Davenport · 11-23-2012, 04:16 PM

Quote:

Originally Posted by Stephen12ZL1

stock injectors?

Yes.

2010 SSRS · 11-23-2012, 04:23 PM

I love it

tsnow · 11-23-2012, 10:23 PM

Nice Job!
Peak boost? and
what octane fuel for the tune?

xVengeancex28 · 11-24-2012, 12:19 PM

Looks amazing!

Davenport · 11-26-2012, 09:02 AM

Quote:

Originally Posted by tsnow

Nice Job!
Peak boost? and
what octane fuel for the tune?

About 13psi. We have 91 on the pumps up here.

Nemisis · 11-26-2012, 11:59 AM

It has a small upper and bigger lower and its only making 13psi? What size are the pulleys? I know you lose about a lb or so with headers but it seems like it should be making more boost.

Davenport · 11-26-2012, 06:25 PM

Quote:

Originally Posted by Nemisis

It has a small upper and bigger lower and its only making 13psi? What size are the pulleys? I know you lose about a lb or so with headers but it seems like it should be making more boost.

I wasn't sure on the boost, but it made the power we wanted which is the important part

OVERPAR73 · 12-04-2012, 02:19 PM

Can u please list each part and where to get them? I have the same car and would love to install the same system, pleas send a pm, thanks.

Davenport · 12-04-2012, 03:18 PM

Quote:

Originally Posted by OVERPAR73

Can u please list each part and where to get them? I have the same car and would love to install the same system, pleas send a pm, thanks.

Your best bet would be to get in touch with Lingenfelter.

http://www.lingenfelter.com/

They'll be able to supply everything you need, though I'm not sure if they supply headers which you can get from American Racing headers.

http://www.americanracingheaders.com/

Hope that helps.

hognutz · 12-04-2012, 11:44 PM

Quote:

Originally Posted by Nemisis

It has a small upper and bigger lower and its only making 13psi? What size are the pulleys? I know you lose about a lb or so with headers but it seems like it should be making more boost.

2.55 upper and 8.6 lower =14psi then you loos 1psi with header so it could be 13psi.

BobB · 12-06-2012, 03:04 PM

Very nice!!

Bob

KaotiK · 12-07-2012, 08:41 PM

Now that's what i'm talking about! Is this the package we were discussing late summer or are there other improvements we could go with to get them most (safe) power out of the LSA?

Cory

Davenport · 12-07-2012, 09:58 PM

Quote:

Originally Posted by KaotiK

Now that's what i'm talking about! Is this the package we were discussing late summer or are there other improvements we could go with to get them most (safe) power out of the LSA?

Cory

Hey Cory,

here's a link to the packages.

http://www.davenportmotorsports.com/packages/39

Let me know if you have any questions. namala@davenportmotorsports.com

11-23-2012, 12:01 PM	#1
Davenport Drives: 2012 Camaro 45th vert 800hp Join Date: Sep 2009 Location: Calgary, Alberta Canada Posts: 242	Davenport Motorsports 690hp ZL1 Package all finished Upgrades include LPE ported/polished supercharger inlet with pinned smaller pulley and solid coupler, Roto-fab air intake, LPE 10% overdrive balancer/pulley assembly, American Racing long tube headers with cats, MSD spark plug wires with heat sleeves and custom in-house tuning. This is a 6spd Automatic equipped version. __________________ WEB - http://www.davenportmotorsports.com Direct email - namala@davenportmotorsports.com Follow us on Facebook - http://www.facebook.com/pages/Davenp...v=wall&ref=sgm

11-23-2012, 03:41 PM	#2
Stephen12ZL1 Drives: 2012 ZL1 Join Date: May 2012 Location: Mechanicsville VA Posts: 1,554	stock injectors? __________________ #917 A6. 10.67@126.2 1.53 60' ATI/Lingenfelter balancer (10" ring), stock upper pulley, 90mm TB, ID850s,Rotofab/Lingenfelter intercooler reservoir, Cooler Logic HX, Lingenfelter idler relocation bracket, NGK TR7ix, 160 t-stat, Dewitts Radiator, Texas Speed 1 7/8" headers(no cats). M&H drag radials 325/45-17 & M&H 28x4.5" bias skinnies. Tuning by Frost at Performance Autosport in Richmond, VA (804) 358-2505

11-23-2012, 04:23 PM	#4
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 123,989 View My Garage	I love it __________________ Jannetty Racing JRE Street Package

11-24-2012, 12:19 PM	#6
xVengeancex28 Drives: 2010 IOM 2SS/RS Join Date: May 2010 Location: Central NJ Posts: 10,354	Looks amazing! __________________

12-07-2012, 08:41 PM	#14
KaotiK Drives: 2012 Camaro ZL1 Join Date: Oct 2011 Location: Alberta, Canada Posts: 242 View My Garage	Now that's what i'm talking about! Is this the package we were discussing late summer or are there other improvements we could go with to get them most (safe) power out of the LSA? Cory __________________ 2012 ZL1 #478, BLACK, 6 SPD MANUAL, EXPOSED CARBON FIBER HOOD, BLACK 10 SPOKE WHEELS, SUNROOF, SUEDED APP. PACKAGE. 1000 Initial Order 11/29/2011Doug Marshall Chevrolet 1100 Order accepted at dealer: 11/29/2011 - QBFFHK 2000 Order accepted by GM: 01/24/2012 3000 Accepted By Production Control: 01/24/2012TPW - 03/05/2012 3100 Sequenced: 02/20/2012 3300 Scheduled For Production:02/20/2012 3400 Broadcast: 02/22/2012 3800 Produced: 03/07/2012 4000 Available To Ship: 03/07/2012 4200 Shipped: 04/05/2012 5000 Delivered To The Dealer: 04/13/2012 6000 Delivered To Customer: 04/19/2012

11-23-2012, 10:23 PM	#5
tsnow Drives: 12' ZL1, AGM 6M Join Date: Jun 2009 Location: 49th state Posts: 221	Nice Job! Peak boost? and what octane fuel for the tune?

11-26-2012, 11:59 AM	#8
Nemisis Drives: 2013 Ashen Gray Metallic-M6 Join Date: Aug 2012 Location: Artesia, NM Posts: 174	It has a small upper and bigger lower and its only making 13psi? What size are the pulleys? I know you lose about a lb or so with headers but it seems like it should be making more boost.

12-04-2012, 02:19 PM	#10
OVERPAR73 2013 CRT ZL1 convertible Drives: 2013 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 933 View My Garage	Can u please list each part and where to get them? I have the same car and would love to install the same system, pleas send a pm, thanks.

12-06-2012, 03:04 PM	#13
BobB Drives: Chevrolet Corvette Grand Sport Join Date: May 2012 Location: MA and FL Posts: 27	Very nice!! Bob