Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
GM Parts House
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro DIY & HOW-TO instructions & discussions


Reply
 
Thread Tools
Old 12-13-2012, 03:50 PM   #57
mikey1107
 
mikey1107's Avatar
 
Drives: 2012 ZL1
Join Date: Sep 2011
Location: Oklahoma
Posts: 330
Can anyone tell my what size the EPDM hose and plugs are?
__________________
2012 AGM ZL1 M6 #574


2010 SW 1SS/RS-SOLD
mikey1107 is offline   Reply With Quote
Old 12-23-2013, 07:00 PM   #58
132SS
 
132SS's Avatar
 
Drives: 2013 2SS
Join Date: May 2013
Location: Magnolia, Tx
Posts: 117
Just ordered mine. Can't wait to put it on.

Sent from my LG-E980 using Tapatalk
__________________
2013 2SS/RS, LMR CAI, 1 7/8 TSP headers, high flow cats and tuned by LMR houston. More Goodies to come
132SS is offline   Reply With Quote
Old 04-07-2014, 01:36 PM   #59
Garndog
 
Garndog's Avatar
 
Drives: 2012 Camaro 2SS/RS LS3
Join Date: May 2012
Location: Georgia
Posts: 43
Once installed ! Both resevoirs get the same dot 4 brake fluid in them?
Garndog is offline   Reply With Quote
Old 04-07-2014, 07:32 PM   #60
Bowtie-Bri

 
Bowtie-Bri's Avatar
 
Drives: 2013 Camaro 2SS RS Convt.
Join Date: Mar 2011
Location: West MI (Home of the Tulips)
Posts: 814
Yes!

Quote:
Originally Posted by Garndog View Post
Once installed ! Both resevoirs get the same dot 4 brake fluid in them?
__________________
2013 Nickey Stage II Camaro SS Convertible #10.Black w/ Red leather interior. No Weeds Elec. Diverters, CNC ported heads, custom grind cam, upgraded fuel injectors, ZL-1 fuel pump, V-Max ported TB, Red Magnuson Super Charger with rear cog drive, upgraded rear axles good for 1400Hp, 3:45 gears, Tremec 6 spd., Pedders adj. coil overs, Phadt ZL-spec swaybars, 800Hp at the crank, 670RWHP, 613ft.lbs. torq. @ 11lbs. boost.
Bowtie-Bri is offline   Reply With Quote
Old 04-13-2014, 09:56 AM   #61
Rabamaro
 
Drives: 2010 ABM SS/RS
Join Date: Nov 2010
Location: Prairieville, LA
Posts: 491
I just received my kit from Jerry and Ideal Garage. It came with a couple caps, but no hose. Are folks using their factory hose with this mod?
__________________
Vararam Tune CAI, Vararam Power Wedge, 160 degree stat, VMax ported throttle body, Ceramic coated ARH 1 7/8" LTs with X-pipe, Borla S-Type Axle back, MGW short throw, 3.91s, Ported stock IM, BTR Stage IV cam, Heritage Grille, Backup camera, UMI Performance trailing arms and toe rods, dyno tune
Rabamaro is offline   Reply With Quote
Old 04-14-2014, 09:50 AM   #62
ZL1Reaper
 
ZL1Reaper's Avatar
 
Drives: '13 Silver Ice Metallic ZL1
Join Date: Jul 2012
Location: Carlsbad, CA
Posts: 326
The kit I bought from JDP came with a hose. The stock hose might be too short to reach the secondary reservoir.
ZL1Reaper is offline   Reply With Quote
Old 04-15-2014, 02:02 PM   #63
Rabamaro
 
Drives: 2010 ABM SS/RS
Join Date: Nov 2010
Location: Prairieville, LA
Posts: 491
What's the internal diameter of the EPDM hose? I'm having the hardest time finding it anywhere! Will a braided stainless fuel line work?
__________________
Vararam Tune CAI, Vararam Power Wedge, 160 degree stat, VMax ported throttle body, Ceramic coated ARH 1 7/8" LTs with X-pipe, Borla S-Type Axle back, MGW short throw, 3.91s, Ported stock IM, BTR Stage IV cam, Heritage Grille, Backup camera, UMI Performance trailing arms and toe rods, dyno tune

Last edited by Rabamaro; 04-15-2014 at 02:33 PM.
Rabamaro is offline   Reply With Quote
Old 04-16-2014, 02:15 PM   #64
TLSTWIN
Romans10:9-13
 
TLSTWIN's Avatar
 
Drives: /\yes, this is me/\
Join Date: Nov 2008
Location: Vermilion, Ohio
Posts: 3,993
Just received and installed mine from JDP

So much easier than trying to make my one from my motorcycle work, trying to find a location point, trying to find the right hose, trying to fabric a bracket, etc....

__________________
R.I.P. http://www.camaro5.com/forums/showthread.php?t=373249
Back Street Performance has done a great job with ALL my Performance & Suspension mods, highly recommend them (Rich@BSP) he's in my friends list. https://youtu.be/Lht8sKe1Maw
TLSTWIN is offline   Reply With Quote
Old 04-16-2014, 06:53 PM   #65
GVA 45TH 2SS
KNGTFALL
 
GVA 45TH 2SS's Avatar
 
Drives: 2012 2SS 45th edition
Join Date: Aug 2012
Location: (Near) Charlotte, NC
Posts: 1,374
Quote:
Originally Posted by Rabamaro View Post
I just received my kit from Jerry and Ideal Garage. It came with a couple caps, but no hose. Are folks using their factory hose with this mod?
I believe if you mount it toward the back like in post 52 above (bend the supplied bracket), the stock hose will work.
if you mount it straight off the MC with a straight bracket you will need a longer hose.
GVA 45TH 2SS is offline   Reply With Quote
Old 06-13-2014, 12:07 PM   #66
Bowtie-Bri

 
Bowtie-Bri's Avatar
 
Drives: 2013 Camaro 2SS RS Convt.
Join Date: Mar 2011
Location: West MI (Home of the Tulips)
Posts: 814
Cap Options for brake reservoir??

I'm doing this mod and like most people here haven't been able to locate the cap made of the EPDM. I was wondering if these would hold up to brake fluid?
http://shop.advanceautoparts.com/p/d...rm=vacuum+caps

If not, I remember reading in an earlier post where someone installed a screw before capping off the clutch outlet on the brake reservoir. I thought this might my back up plan if the caps mentioned above won't work.

I have a car show this weekend and really want to get this done.

Any help would be greatly appreciated!!!
__________________
2013 Nickey Stage II Camaro SS Convertible #10.Black w/ Red leather interior. No Weeds Elec. Diverters, CNC ported heads, custom grind cam, upgraded fuel injectors, ZL-1 fuel pump, V-Max ported TB, Red Magnuson Super Charger with rear cog drive, upgraded rear axles good for 1400Hp, 3:45 gears, Tremec 6 spd., Pedders adj. coil overs, Phadt ZL-spec swaybars, 800Hp at the crank, 670RWHP, 613ft.lbs. torq. @ 11lbs. boost.
Bowtie-Bri is offline   Reply With Quote
Old 06-13-2014, 02:34 PM   #67
TLSTWIN
Romans10:9-13
 
TLSTWIN's Avatar
 
Drives: /\yes, this is me/\
Join Date: Nov 2008
Location: Vermilion, Ohio
Posts: 3,993
Quote:
Originally Posted by Bowtie-Bri View Post
I'm doing this mod and like most people here haven't been able to locate the cap made of the EPDM. I was wondering if these would hold up to brake fluid?
http://shop.advanceautoparts.com/p/d...rm=vacuum+caps

If not, I remember reading in an earlier post where someone installed a screw before capping off the clutch outlet on the brake reservoir. I thought this might my back up plan if the caps mentioned above won't work.

I have a car show this weekend and really want to get this done.

Any help would be greatly appreciated!!!
This is exactly why I bought the complete GTO kit from JDP Motorsports. From the time I popped the hood, installed it, closed the hood was 30 min.

I had several reservoirs from my bikes, but by the time I made a bracket, secured it, got the right line, found the proper cap/plug, it just was not worth the hassle
__________________
R.I.P. http://www.camaro5.com/forums/showthread.php?t=373249
Back Street Performance has done a great job with ALL my Performance & Suspension mods, highly recommend them (Rich@BSP) he's in my friends list. https://youtu.be/Lht8sKe1Maw
TLSTWIN is offline   Reply With Quote
Old 06-13-2014, 06:49 PM   #68
Bowtie-Bri

 
Bowtie-Bri's Avatar
 
Drives: 2013 Camaro 2SS RS Convt.
Join Date: Mar 2011
Location: West MI (Home of the Tulips)
Posts: 814
Thanks for the heads up.
I was not aware there was such a kit available. I will check it out!

Quote:
Originally Posted by TLSTWIN View Post
This is exactly why I bought the complete GTO kit from JDP Motorsports. From the time I popped the hood, installed it, closed the hood was 30 min.

I had several reservoirs from my bikes, but by the time I made a bracket, secured it, got the right line, found the proper cap/plug, it just was not worth the hassle
__________________
2013 Nickey Stage II Camaro SS Convertible #10.Black w/ Red leather interior. No Weeds Elec. Diverters, CNC ported heads, custom grind cam, upgraded fuel injectors, ZL-1 fuel pump, V-Max ported TB, Red Magnuson Super Charger with rear cog drive, upgraded rear axles good for 1400Hp, 3:45 gears, Tremec 6 spd., Pedders adj. coil overs, Phadt ZL-spec swaybars, 800Hp at the crank, 670RWHP, 613ft.lbs. torq. @ 11lbs. boost.
Bowtie-Bri is offline   Reply With Quote
Old 06-13-2014, 08:46 PM   #69
TLSTWIN
Romans10:9-13
 
TLSTWIN's Avatar
 
Drives: /\yes, this is me/\
Join Date: Nov 2008
Location: Vermilion, Ohio
Posts: 3,993
Quote:
Originally Posted by Bowtie-Bri View Post
Thanks for the heads up.
I was not aware there was such a kit available. I will check it out!
http://www.jdpmotorsports.com/catalo...result/?q=jdpc
__________________
R.I.P. http://www.camaro5.com/forums/showthread.php?t=373249
Back Street Performance has done a great job with ALL my Performance & Suspension mods, highly recommend them (Rich@BSP) he's in my friends list. https://youtu.be/Lht8sKe1Maw
TLSTWIN is offline   Reply With Quote
 
Reply

Tags
clutch dust, gto clutch reservoir, install, separate reservoir

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
ACT twin disk clutch install by Mike Norris Motorsports ducatisl V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) 34 09-06-2016 08:38 PM
t56 clutch fluid reservoir KKJ V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) 18 08-26-2012 12:46 PM
looking for a shop to do a clutch install in ny or ct 1 bad azz ls3 Tuning / Diagnostics -- engine and transmission 2 08-19-2010 08:22 PM
Zeta (Camaro/Commodore/G8) suspension details Gatecrasher Wheels and Tires Talk Sponsored by The Tire Rack 66 04-16-2009 02:11 PM


All times are GMT -5. The time now is 05:32 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.