Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
MPD1
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Technical Camaro Topics > Camaro Issues / Problems | Warranty Discussions | TSB and Recalls

Camaro Issues / Problems | Warranty Discussions | TSB and Recalls Report, discuss and diagnose any issues and problems with your Camaro, including warranty discussions.

Reply
 
Thread Tools
Old 08-23-2011, 09:56 AM   #51
Awesome_SS
Jeff
 
Awesome_SS's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Feb 2010
Location: Hayes, Va
Posts: 322
Still having issues with my StabiliTrak lights coming on and going off. Been in for service several times and discovered various codes, but nothing has fixed it. One time in for service it was a low voltage code and so they cleaned and re-tightened the terminal. Unhooked my underhood light and tried to say that was the problem. Guess what, the lights came back on again. Last time in, they found a sensor harness partially disconnected. Light goes off, but while driving home the damn lights came back on again. I have GM involved now, but they are telling me to put all the factory parts back on, so that they can diagnose the problem.Really??? What a joke!!!
Only when hell freezes over! The GM customer service rep kept deflecting and stating that they cannot do anything unless all the aftermarket parts are taken off and factory parts put back on. HEY LADY, THE DAMN LIGHT WAS COMING ON BEFORE ALL THE MODS! Besides, I highly doubt a camshaft, headers, and exhaust has anything to do with it. This is the treatment I get for being a loyal GM customer for the last 24 years. What's second worse to a lyer, is a person who makes excuses so that they don't have to do anything.
__________________
2010 Camaro SS - Currently: 575 HP, 485 RWHP, 430 Max. TQ. Stock: 400 HP, 339 RWHP, 349 Max. TQ. 2R Max Cam,SW LT Headers & Corsa Exh.ADM CAI & Livernois Tuned, PI 2600 TQ Converter, LPE 3.70 Gears, Eaton True Trac, Ported Heads, TB & Intake. 2012 Camaro ZL1 - Currently: All Stock
Awesome_SS is offline   Reply With Quote
Old 08-23-2011, 12:44 PM   #52
tainoxl
 
tainoxl's Avatar
 
Drives: 2010 CGM Camaro
Join Date: May 2010
Location: Trenton, NJ
Posts: 135
Had this happen to me this morning. I drove my car back home put my scanner on it sure enough misfire cylinder 6 and 4. Pop the hood and see the plug wires just laying there. For some reason the plug wires just popped off. I plugged them back up checked the others and reset the light no issues.
tainoxl is offline   Reply With Quote
Old 08-23-2011, 05:35 PM   #53
thiggin2
 
thiggin2's Avatar
 
Drives: 05/07 Chevy's
Join Date: Aug 2009
Location: Florida
Posts: 337
If you have a "Service StabiliTrak" on the dic on start up then it shuts off after 2-3 seconds, theres a updated calibration for the EBCM. The bulletin# is PIC5432A. Here is also a .pdf copy of it.
Attached Images
File Type: pdf 2644901.pdf (47.2 KB, 297 views)
thiggin2 is offline   Reply With Quote
Old 08-23-2011, 05:47 PM   #54
Sevn86


 
Sevn86's Avatar
 
Drives: 2010 Camaro 2LT/RS ABM
Join Date: Sep 2009
Location: Sugar Land, TX
Posts: 13,087
when i had my camaro it would flash that message to me from time to time and i had no mods...so idk
__________________
2LT, RS, AT6 ABM, Gray Leather
Quote:
Originally Posted by baclarsen View Post
Dude, you go through cars faster than I go through underware!!
1000 Initial Order 9/14/2009 - Classic Chevy Sugar Land
1100 Order accepted at dealer: 9/15/2009 - NPGV41.
2000 Order accepted by GM: 9/29/2009
3000 Accepted By Production Control: 9/30/2009 - TPW 10/26/09
3100 Sequenced:10/12/09
3300 Scheduled For Production:10/13/09
3400 Broadcast:10/22/09
3800 Produced:10/27/09
4000 Available To Ship:10/28/09
4200 Shipped:10/29/09
5000 Delivered To The Dealer:11/09/09
6000 Delivered To Customer:11/12/09
Sevn86 is offline   Reply With Quote
Old 08-23-2011, 06:04 PM   #55
VT2CA
 
Drives: 2010 1LT CYBER GREY
Join Date: Jul 2009
Location: SOCAL
Posts: 124
The message has nothing to do with Stabillitrack. Your engine is misfiring
__________________
+MAGNAFLOW CUSTOM EXHAUST+AEM CAI+BARTON SHORT THROW SHIFTER+BODY COLOR BOWTIES+LIMO TINT ALL AROUND+
VT2CA is offline   Reply With Quote
Old 08-23-2011, 07:36 PM   #56
Awesome_SS
Jeff
 
Awesome_SS's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Feb 2010
Location: Hayes, Va
Posts: 322
Just to be crstal clear. The StabiliTrak message pops up while driving normally down the road at constant speed. I have seen it pop up after the engine starts and right after I put it in gear. It will stay on various periods of time. Sometimes going off after 30 minutes and sometimes it stays on for days. I have had periods of time of about 2-3 months and the light never comes on.
__________________
2010 Camaro SS - Currently: 575 HP, 485 RWHP, 430 Max. TQ. Stock: 400 HP, 339 RWHP, 349 Max. TQ. 2R Max Cam,SW LT Headers & Corsa Exh.ADM CAI & Livernois Tuned, PI 2600 TQ Converter, LPE 3.70 Gears, Eaton True Trac, Ported Heads, TB & Intake. 2012 Camaro ZL1 - Currently: All Stock
Awesome_SS is offline   Reply With Quote
Old 10-12-2011, 12:27 AM   #57
Awesome_SS
Jeff
 
Awesome_SS's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Feb 2010
Location: Hayes, Va
Posts: 322
Not sure if this will help, but just keep it mind to have it checked out next time at the dealer. I have been fighting the "Service Stabilitrak" light for about 11K miles or so. Just now starting to get to the bottom of it. One trip to the dealer, they discoverd that the wiring harness was partially unplugged, but the light came back on afterwards. Today, they discovered that the steering wheel angle sensor is bad. Hopefully, this will take care of the light. I have had it serviced numerous other times, but no real reason to the cause. A low voltage reading appeared one time doing the diagnostics, but the light continued to come on. So, I will coninue to take it to the dealer in hopes of finally eliminating all the possible causes. It just makes me wonder how many other things are partially unplugged or bad on the car.
__________________
2010 Camaro SS - Currently: 575 HP, 485 RWHP, 430 Max. TQ. Stock: 400 HP, 339 RWHP, 349 Max. TQ. 2R Max Cam,SW LT Headers & Corsa Exh.ADM CAI & Livernois Tuned, PI 2600 TQ Converter, LPE 3.70 Gears, Eaton True Trac, Ported Heads, TB & Intake. 2012 Camaro ZL1 - Currently: All Stock
Awesome_SS is offline   Reply With Quote
Old 03-30-2012, 12:39 AM   #58
*NeRD*2LTRS
HT5:Keeping it Exclusive
 
*NeRD*2LTRS's Avatar
 
Drives: Black Mamba 2010 2LT RS
Join Date: Feb 2011
Location: Los Angeles
Posts: 573
Bump.! Ive had this problem for a year now first ECM was replaced, still happened tomorrow I'm getting a new tcm , hopefully that'll take care of it ,, did anyone ever figure out was the problem?
__________________
*NeRD*2LTRS is offline   Reply With Quote
Old 02-04-2013, 06:53 PM   #59
Hyp
I've been lost...
 
Hyp's Avatar
 
Drives: 2010 SW 2SS/RS W/IOM LSA Swap
Join Date: Nov 2009
Location: DFW, Texas
Posts: 460
I've been dealing with this issue for a couple of years now... recently its been getting worse. It used to only pop the "Service Stabilitrak" light after restarting the car while the motor is still hot, but recently its been popping the light every time I start the car. It'll randomly go on and off, sometimes for a few seconds, other times for a few minutes. I've had the codes checked and its telling us theres a misfire in cylinder #6 but we cant seem to narrow down the exact problem. We have replaced the spark plugs, spark plug wires, and installed a new coil, we also replaced the power and ground wires for the battery just to make sure that wasnt the issue. We're now starting to think theres something wrong with my tune, and I'm thinking about getting it redone this weekend. Anyone have any other ideas?
__________________
Hyp is offline   Reply With Quote
Old 02-07-2013, 07:49 AM   #60
Chevrolet Customer Svc


 
Chevrolet Customer Svc's Avatar
 
Drives: GM Vehicles
Join Date: Jun 2010
Location: Michigan
Posts: 8,604
Quote:
Originally Posted by Hyp View Post
I've been dealing with this issue for a couple of years now... recently its been getting worse. It used to only pop the "Service Stabilitrak" light after restarting the car while the motor is still hot, but recently its been popping the light every time I start the car. It'll randomly go on and off, sometimes for a few seconds, other times for a few minutes. I've had the codes checked and its telling us theres a misfire in cylinder #6 but we cant seem to narrow down the exact problem. We have replaced the spark plugs, spark plug wires, and installed a new coil, we also replaced the power and ground wires for the battery just to make sure that wasnt the issue. We're now starting to think theres something wrong with my tune, and I'm thinking about getting it redone this weekend. Anyone have any other ideas?

I would suggest going to a dealership for a diagnosis. They should be able to pinpoint this for you.

Brandon
Chevrolet Customer Service
Chevrolet Customer Svc is offline   Reply With Quote
Old 09-08-2013, 11:41 PM   #61
ducatisl
Emerald Coast Camaros
 
ducatisl's Avatar
 
Drives: 2010 2SS 6m
Join Date: Mar 2010
Location: Fort Walton Beach, FL
Posts: 597
3 years old this thread is and no solution or explanation?
__________________
416 LSA block, Callies/Manley/Scat/Melling/Cloyes/ARP/Ferrea/Landspeed/Hi-Ram/FIC/Tick/Nitrous Outlet/LPE/ Strange/DSS/BMR/ACT/GZM/Fore etc., built/tuned by me.
ducatisl is offline   Reply With Quote
Old 09-09-2013, 08:38 AM   #62
Eric Fischer
 
Drives: 2010 CGM 2SS/RS 6M
Join Date: Nov 2009
Location: etown NJ
Posts: 13
It seems as though when these cars have misfires, a side effect is that PCM goes nuts and issues seemingly unrelated faults like "Service Stabilitrack".

In my case, I had a spark plug wire that was seated all the way. The car ran like crap and every two minutes or so would issue the "Service Stabilitrack" message. Once I figured out the plug wire was loose, I seated the plug wire all the way, cleared the codes and the car has ran like a top since with no more warning messages.
__________________
2010 RS/2SS CGM 6M - all stock 13.05 @ 108.81 w/ a 1.997 sixty ft
2009.5 SRM G8 GT - all stock 13.519 @ 104.11 w/ a 2.064 sixty ft
2009 PSM G8 GT (Dad's) - all stock 13.656 @ 101.71 w/ a 2.051 sixty ft.
1998 C5 - 383 LS1 -10.968 @ 120.24 w/ a 1.47 sixty ft.
2001 C5 Dad's - 416 mild stroker 10.796 @ 124.90 w/ a 1.475 sixty ft.
1969 Camaro - 5.3L LS conversion 13.861 @ 101.51 @ 2.068 sixty ft. SOLD
Eric Fischer is offline   Reply With Quote
Old 09-09-2013, 09:00 AM   #63
Chevrolet Customer Svc


 
Chevrolet Customer Svc's Avatar
 
Drives: GM Vehicles
Join Date: Jun 2010
Location: Michigan
Posts: 8,604
Hi ducatisl!

We would be happy to assist if you are you currently experiencing any issues with your vehicle. We treat each situation on a case by case basis and can research any issues further for you. Thank you!

Jessica
Chevrolet Customer Care

Quote:
Originally Posted by ducatisl View Post
3 years old this thread is and no solution or explanation?
Chevrolet Customer Svc is offline   Reply With Quote
Old 06-24-2014, 03:54 PM   #64
M48A3
 
Drives: 45
Join Date: Oct 2013
Location: Virginia
Posts: 4
service stabilitrak message

Upon shutting my engine off and going into my house for 5 minutes I came back out started the engine and the Service Stabilitrak message came up and engine started to run terrible, like a few cylinders lost. The car shook unreal. Had chevy dealer take the car and later found out that a valve spring collapsed. Its still in the shop I guess we'll see what's up when they get it started. I'm concerned that the valve isn't damaged, maybe the piston may have damage. They claim the valve never (because) of clearance didn't touch the piston. Definitely a compression check is in order. Any thoughts????
M48A3 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What is the real Service Interval Verio Mechanical Maintenance: Break-in / Oil & Fluids / Servicing 14 12-27-2013 11:44 AM
Onstar....a spy???? please comment dieseldave24v General Automotive + Other Cars Discussion 138 02-23-2012 01:12 PM
Lets Talk About Extended Warranties for our 2010 Camaro's from the Dealership a Sec.. Black LS3 Camaro Issues / Problems | Warranty Discussions | TSB and Recalls 39 03-21-2010 11:38 AM
Laws Protecting Consumers for Aftermarket Parts strauchpete Audio, Video, Bluetooth, Navigation, Radar, Electronics Forum 9 01-17-2010 08:31 AM
Service Stabilitrak? (Launch Control) tommygun6644 5th Gen Camaro SS LS LT General Discussions 7 12-22-2009 11:11 AM


All times are GMT -5. The time now is 09:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.