|11-29-2011, 10:32 PM||#26|
Camaro for Life
I will post a pic of the part tomorrow. The item number is 54456 and model number is 351825. Here it is on their website for reference: http://www.lowes.com/pd_54456-322-35...d=10151&rpp=24
It took me about 15 minutes to find the part. It was in the plumbing section of lowes. It wasn't down an aisle for me but on the back wall near the actual pvc pipes. There was a section just for the type of plugs of all kinds of sizes and prices.
Here are pictures of the reciept, it installed, and underhood shots.
Hope this is helpful. If you any other questions or need any help. Feel free to contact me on here.
Current ride: Awaiting her arrival &
2013 VR 1LT A6 #147344 (hers) currently searching for a replacement for hers. Thread
Exterior: no clue
Best run: not until after break-in
How to hug your camaro
Buy the car that you would most like to get beat in. The other guy will always be faster.
|09-10-2012, 02:43 PM||#28|
Drives: 2011 Camaro LS IBM M6
Join Date: Jul 2010
Location: San Deigo,CA
For those with the first gen Injen intakes with the 1 inch inner diameter opening, rather than leaving excess hose I found an expanding 1"-1 and 3/8" rubber plug and capped the driver side head port with a 3/8" rubber cap that came in a "bypass cap" assortment in the HELP section at Autozone. To top it off I removed the filler neck being that I removed the engine cover months ago. Looks clean and organized.
|09-10-2012, 02:48 PM||#29|
Drives: Drives a 2010 2SS/RS Camaro
Join Date: Aug 2010
Location: Great White North*****
Do what Tracy indicates ,I did the same thing just installed the Air Breather and was getting crankcase fumes. Mine is the V8 though.
|04-04-2013, 04:27 PM||#30|
Drives: 2010 camaro
Join Date: Jun 2009
Location: new brunswick
Is it possible that the return line to the intake makes such a big vacuum that it causes excess oil from the PCV valve to be sucked up and ran through the can?
Sent from my DROID BIONIC using Tapatalk 2
|Thread||Thread Starter||Forum||Replies||Last Post|
|A Look at GM's Oil Life Monitoring System||franknbeans||Mechanical Maintenance: Break-in / Oil & Fluids / Servicing||165||04-05-2014 07:33 AM|
|Oil Catch Can Where to buy||Pollock||Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons||19||05-01-2011 10:43 PM|
|ON STAR OIL Life %||T_MECO||Mechanical Maintenance: Break-in / Oil & Fluids / Servicing||34||04-25-2010 08:55 PM|
|synthetic motor oil?||bigd1276||Mechanical Maintenance: Break-in / Oil & Fluids / Servicing||71||01-29-2009 12:28 PM|
|Major U.S. oil source is tapped||KILLER74Z28||Off-topic Discussions||32||10-30-2007 09:47 AM|