Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Rick@Livernois
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Specific Models / Packages > Camaro 1LE Forum

Camaro 1LE Forum Camaro 1LE Package releated discussions

Reply
 
Thread Tools
Old 04-29-2013, 11:36 AM   #1
321 CYA
 
Drives: 2013 Rally Yellow Camaro 2SS/RS
Join Date: Apr 2013
Location: Central, PA
Posts: 60
1LE wheel offset?

What is the 1LE wheel off set? and they are both 20x10 correct?
Thanks for the help. Trying to get a square setup on my SS.
Thanks
321 CYA is offline   Reply With Quote
Old 04-29-2013, 11:53 AM   #2
Phdpsy
 
Phdpsy's Avatar
 
Drives: SW 2013 1LE
Join Date: Jan 2013
Location: Louisiana
Posts: 126
1LE are 20x10 And 20x11 exactly as ZL1...just with 285s all around. If you want a true square set up, try something like TSW Nurburging 20x10 et35. Can run 285s (and some 295s) all around and rotate as needed for better tire life. Can't rotate the 1LE/ZL1 set ups.
Phdpsy is offline   Reply With Quote
Old 04-29-2013, 11:57 AM   #3
Southern Comfort
No Tags/Habitual Violator
 
Southern Comfort's Avatar
 
Drives: 2013 SIM 1LE & 2010 ABM/LT/RS
Join Date: Sep 2011
Location: North Georgia
Posts: 1,977
Keep in mind the 1LE rear wheels wont fit the on the front. They contact the struts.
You could get square with 4 1LE fronts.
__________________

2010 2SS Vortech (sold).... 2010 2LT ABM (sweet).... 2013 1LE 2SS (sold)... 2013 1LE possibly 44 of 44
Check out the Atlanta area A.C.E.5 events page
Southern Comfort is online now   Reply With Quote
Old 04-29-2013, 12:08 PM   #4
gajagfan

 
Drives: 2013 1SS 1LE Black - Std Exhaust
Join Date: Mar 2013
Location: Brunswick, GA
Posts: 1,286
Not sure of the offset, but the front wheels are 10" and the rears are 11". I also know that the 11" wheel does not fit on the front. The tires are the same on all 4 wheels (285/35/20's).
gajagfan is offline   Reply With Quote
Old 04-29-2013, 12:13 PM   #5
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Nov 2010
Location: SLC, UT
Posts: 6,312
** EDIT +23 up front and +43 in the rear.

Best regards,

Tyler
888-308-6007
__________________

Last edited by JDP Tyler; 04-29-2013 at 01:30 PM.
JDP Tyler is online now   Reply With Quote
Old 04-29-2013, 12:22 PM   #6
321 CYA
 
Drives: 2013 Rally Yellow Camaro 2SS/RS
Join Date: Apr 2013
Location: Central, PA
Posts: 60
Thanks everyone this is the info I have been looking for!
Thanks again!
321 CYA is offline   Reply With Quote
Old 04-29-2013, 12:25 PM   #7
321 CYA
 
Drives: 2013 Rally Yellow Camaro 2SS/RS
Join Date: Apr 2013
Location: Central, PA
Posts: 60
Tyler what it the web page that has this offset comparison on?
321 CYA is offline   Reply With Quote
Old 04-29-2013, 12:30 PM   #8
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Nov 2010
Location: SLC, UT
Posts: 6,312
I found that on this site in a search, so I am not sure.

Best regards,

Tyler
888-308-6007
__________________
JDP Tyler is online now   Reply With Quote
Old 04-29-2013, 12:32 PM   #9
321 CYA
 
Drives: 2013 Rally Yellow Camaro 2SS/RS
Join Date: Apr 2013
Location: Central, PA
Posts: 60
Quote:
Originally Posted by Sales@JDP View Post
I found that on this site in a search, so I am not sure.

Best regards,

Tyler
888-308-6007
Thanks I found it!
321 CYA is offline   Reply With Quote
Old 04-29-2013, 12:35 PM   #10
flht99b

 
flht99b's Avatar
 
Drives: 2010 Camaro 2SS/RS RJT
Join Date: May 2009
Location: Knoxville
Posts: 1,302
Actually the ZL-1 and 1LE offsets are as follows:
20x10 fronts offset +23mm ( this will clear OEM struts with a 285/35/20 tire ) If you have some coil overs you can move the wheel/tire assembly inboard a bit with more positive offset such as +30mm
20x11 rears offset +43mm
GM picked these sizes and offsets so that the front and rear track would be the same on the ZL-1 and 1LE.
If you put a front 20x10 with +23mm offset ZL-1/1LE wheel on the rear the wheel will stick out .3" more than the 20x11 +43mm offset wheel on the rear. Pretty aggressive.
Ed M.
__________________
RJT 2SS/RS, AAM 3.70's, MTI Sway Bars, Shifter & SS brake lines, BMR Trailing & Toe Arms, full rear cradle & diff bushings, Pedders XA's, Camber/Toe eccentrics, Radius arm inserts, Hawk HPS Brake pads, GTO clutch reservoir, LS9 cam, Comp Cam valve springs, Melling 10296 oil pump, CR 5 timing chain, LS2 damper, CAI Cold Air Induction, ARH LT headers w/HF cats, GMPP touring axle back, Elite Engineering Catch Can, Forgeline 20x9 & 20x11 DS3 wheels w/Vredstein 275/40/20 & 315/35/20 tires, '11 Convertible spoiler, Lloyd "SS" Floor Mats, GM Camaro Trunk Mat, GM SS Fender & LS3 Emblems.
flht99b is offline   Reply With Quote
Old 04-29-2013, 12:49 PM   #11
NinoSS

 
Drives: 2SS/RS CGM LS3
Join Date: Aug 2009
Location: NJ
Posts: 1,354
Quote:
Originally Posted by flht99b View Post
Actually the ZL-1 and 1LE offsets are as follows:
20x10 fronts offset +23mm ( this will clear OEM struts with a 285/35/20 tire ) If you have some coil overs you can move the wheel/tire assembly inboard a bit with more positive offset such as +30mm
20x11 rears offset +43mm
GM picked these sizes and offsets so that the front and rear track would be the same on the ZL-1 and 1LE.
If you put a front 20x10 with +23mm offset ZL-1/1LE wheel on the rear the wheel will stick out .3" more than the 20x11 +43mm offset wheel on the rear. Pretty aggressive.
Ed M.
He is correct... See pics (my wheels) below...

Front



Rear

__________________
Vengeance stage I cam (442rwhp/412rwtq) / CAI intake w/ADM race scoop / Dynatech LT's / ATI udp / JRE tuned / Eaton Posi LPE-JRE 3.91's / L99 Corsa / Whiteline Sways & Bushings / UMI Trailing Arms & Toe Rods / ZL1 wheels / NT05 275/315

Last edited by NinoSS; 04-29-2013 at 02:19 PM.
NinoSS is offline   Reply With Quote
Old 04-29-2013, 12:52 PM   #12
NinoSS

 
Drives: 2SS/RS CGM LS3
Join Date: Aug 2009
Location: NJ
Posts: 1,354
I have pics of them on a digital scale too...
__________________
Vengeance stage I cam (442rwhp/412rwtq) / CAI intake w/ADM race scoop / Dynatech LT's / ATI udp / JRE tuned / Eaton Posi LPE-JRE 3.91's / L99 Corsa / Whiteline Sways & Bushings / UMI Trailing Arms & Toe Rods / ZL1 wheels / NT05 275/315
NinoSS is offline   Reply With Quote
Old 04-29-2013, 01:29 PM   #13
JDP Tyler

 
JDP Tyler's Avatar
 
Drives: 2010 Camaro SS/RS
Join Date: Nov 2010
Location: SLC, UT
Posts: 6,312
Quote:
Originally Posted by flht99b View Post
Actually the ZL-1 and 1LE offsets are as follows:
20x10 fronts offset +23mm ( this will clear OEM struts with a 285/35/20 tire ) If you have some coil overs you can move the wheel/tire assembly inboard a bit with more positive offset such as +30mm
20x11 rears offset +43mm
GM picked these sizes and offsets so that the front and rear track would be the same on the ZL-1 and 1LE.
If you put a front 20x10 with +23mm offset ZL-1/1LE wheel on the rear the wheel will stick out .3" more than the 20x11 +43mm offset wheel on the rear. Pretty aggressive.
Ed M.
Thank you for the correction! Good to know.

Best regards,

Tyler
888-308-6007
__________________
JDP Tyler is online now   Reply With Quote
Old 06-17-2013, 08:11 PM   #14
GT09OK
 
Drives: 09 G8GT
Join Date: May 2013
Location: oklahoma
Posts: 22
Will a 19x9.5 backspacing 42mm fit on a 2013 1le camaro and clear brakes and all?
GT09OK is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:01 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.