Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Anthony @ LG Motorsports
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Sponsors Classifieds Marketplace > Forced Induction

View our official forum sponsors list.


Reply
 
Thread Tools
Old 04-29-2013, 02:21 PM   #1
NickJRE


 
NickJRE's Avatar
 
Drives: Nothing Fun.
Join Date: Aug 2009
Location: CT
Posts: 1,164
Smaller Pulleys in stock for the new SLP 2300

Since there wasn't many Pulley options available for the new style SLP 2300 we decides to go ahead and make our own.

These pulley's are high quality like everything we sell.

Available in 3.2, 3.4 or 3.6. Right now we have 3.4's in stock ready to go.

Name:  ImageUploadedByTapatalk1367263236.137203.jpg
Views: 1011
Size:  125.3 KB
NickJRE is offline   Reply With Quote
Old 04-29-2013, 03:11 PM   #2
old motorhead

 
Drives: Maggie blown LS3 vette
Join Date: Aug 2009
Location: SE TX
Posts: 1,451
I wonder why they felt the need to add one more screw. Haven't heard of any Maggie failures due to not enuff screws on the blower pulley. Guess it would have been too easy to make it interchange with the Maggie
old motorhead is offline   Reply With Quote
Old 04-29-2013, 04:48 PM   #3
kissmyss03
 
kissmyss03's Avatar
 
Drives: 2011 Camaro SS 2SS/RS
Join Date: Sep 2012
Location: macomb Twp
Posts: 152
kinda like askying why did apple go to a different connector with the iphone 5. bastards
__________________
2011 Camaro 2SS/RS M6
Kooks Headers, catless mids, corsa exhaust, rotofab intake, SLP TVS 2300, 3.2 pulley, blower cam, cts-v fuel pump, Vector tuned 622 RWHP 573 TQ
kissmyss03 is offline   Reply With Quote
Old 04-30-2013, 08:00 AM   #4
NickJRE


 
NickJRE's Avatar
 
Drives: Nothing Fun.
Join Date: Aug 2009
Location: CT
Posts: 1,164
Quote:
Originally Posted by kissmyss03 View Post
kinda like askying why did apple go to a different connector with the iphone 5. bastards
NickJRE is offline   Reply With Quote
Old 04-30-2013, 01:25 PM   #5
Iam Broke
PHAT B33
 
Iam Broke's Avatar
 
Drives: 2012 TF3 Camaro 2SS/RS M6
Join Date: Jun 2012
Location: Dark of the Moon
Posts: 1,441
What size belt for the 3.4" on a '12?
__________________
Another 1 of 371 '12 T3 LS3 M6's built.
Iam Broke is offline   Reply With Quote
Old 05-01-2013, 09:18 AM   #6
NickJRE


 
NickJRE's Avatar
 
Drives: Nothing Fun.
Join Date: Aug 2009
Location: CT
Posts: 1,164
Quote:
Originally Posted by Iam Broke View Post
What size belt for the 3.4" on a '12?
Not quite sure on that. We haven't even had a chance to put one on a vehicle, I put the post up as soon as they came in the door
NickJRE is offline   Reply With Quote
Old 05-01-2013, 09:26 AM   #7
NickJRE


 
NickJRE's Avatar
 
Drives: Nothing Fun.
Join Date: Aug 2009
Location: CT
Posts: 1,164
Here's a link to them on our site:

http://www.jreperformanceparts.com/s...e-slp-s-c.html
NickJRE is offline   Reply With Quote
Old 05-01-2013, 11:34 AM   #8
2sscamaro11
 
Drives: 2011 ss camaro
Join Date: Jan 2013
Location: hamburg pa
Posts: 262
Is there anyway to give an approximate boost range for each pulley?
2sscamaro11 is offline   Reply With Quote
Old 05-01-2013, 11:59 AM   #9
NickJRE


 
NickJRE's Avatar
 
Drives: Nothing Fun.
Join Date: Aug 2009
Location: CT
Posts: 1,164
Quote:
Originally Posted by 2sscamaro11 View Post
Is there anyway to give an approximate boost range for each pulley?
Approximately 1.5-2 lbs of boost per each size of pulley you drop.

The stock size pulley makes about 6.5 lbs..

So figure:

8 - 8.5 lbs with a 3.6

9.5 - 10 lbs with a 3.4

11 - 11.5 lbs with a 3.2
NickJRE is offline   Reply With Quote
Old 05-01-2013, 03:45 PM   #10
Iam Broke
PHAT B33
 
Iam Broke's Avatar
 
Drives: 2012 TF3 Camaro 2SS/RS M6
Join Date: Jun 2012
Location: Dark of the Moon
Posts: 1,441
Should be close estimates. I make 8.5 - 9 psi on a 91mm SLP depending on temps. That's pretty close to the 3.6 size.

Good price on the 3.4 BTW. Might be ordering one once you know the Gates belt #.
__________________
Another 1 of 371 '12 T3 LS3 M6's built.

Last edited by Iam Broke; 05-02-2013 at 01:03 PM.
Iam Broke is offline   Reply With Quote
Old 05-04-2013, 07:44 PM   #11
Iam Broke
PHAT B33
 
Iam Broke's Avatar
 
Drives: 2012 TF3 Camaro 2SS/RS M6
Join Date: Jun 2012
Location: Dark of the Moon
Posts: 1,441
3.4" pulley looks like you need a Gates K061025, 5/8" shorter than the K061033 I'm running on an SLP 91mm (3.6"). Nothing in between the two by Gates.

Ordering up a 3.4, I'll post if the belt fits.
Attached Images
File Type: pdf GatesSizeListings.pdf (162.7 KB, 149 views)
__________________
Another 1 of 371 '12 T3 LS3 M6's built.

Last edited by Iam Broke; 05-05-2013 at 10:03 AM.
Iam Broke is offline   Reply With Quote
Old 05-06-2013, 06:35 AM   #12
NickJRE


 
NickJRE's Avatar
 
Drives: Nothing Fun.
Join Date: Aug 2009
Location: CT
Posts: 1,164
Quote:
Originally Posted by Iam Broke View Post
3.4" pulley looks like you need a Gates K061025, 5/8" shorter than the K061033 I'm running on an SLP 91mm (3.6"). Nothing in between the two by Gates.

Ordering up a 3.4, I'll post if the belt fits.
Awesome, Thank you! Let us know how it works out for you.
NickJRE is offline   Reply With Quote
Old 05-08-2013, 07:04 PM   #13
Iam Broke
PHAT B33
 
Iam Broke's Avatar
 
Drives: 2012 TF3 Camaro 2SS/RS M6
Join Date: Jun 2012
Location: Dark of the Moon
Posts: 1,441
Gates K061025 is too short, I have the K061033 on there and it's in between the wear marks on the tensioner but I am going to order a K061031. It is 1/4" shorter than the '1033 and should be perfect.
__________________
Another 1 of 371 '12 T3 LS3 M6's built.
Iam Broke is offline   Reply With Quote
Old 05-08-2013, 07:20 PM   #14
JANNETTYRACING
PRESIDENT CALIBRATOR JRE

 
JANNETTYRACING's Avatar
 
Drives: YELLOW 2013 ZL1 AUTO
Join Date: Jun 2009
Location: ON THE DYNO WATERBURY CT.
Posts: 11,120
Quote:
Originally Posted by Iam Broke 6520625
Gates K061025 is too short, I have the K061033 on there and it's in between the wear marks on the tensioner but I am going to order a K061031. It is 1/4" shorter than the '1033 and should be perfect.
Thanks for Sharing,

Update; 3.2, 3.4, and 3.6 all in stock ready for shipping.
__________________
Technical information, Parts Sales, Professional Installation, and Custom Dyno Tuning.
Please vist our web sites for all your performance needs!
Ted Jannetty
Jannetty Racing Ent Inc.
2984 East Main St.
Waterbury Ct. 06705
203-753-7223
tedj@jannettyracing.com
www.jannettyracing.com
www.turboaddictionparts.com
Performance Parts
JANNETTYRACING is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:51 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.