Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Circle-D
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Vendor and Seller review / feedback / experiences


Reply
 
Thread Tools
Old 03-21-2012, 01:49 AM   #43
rberns


 
rberns's Avatar
 
Drives: 2011 Camaro 2SS/RS
Join Date: Apr 2011
Location: Cedar Rapids, IA
Posts: 3,249
Quote:
Originally Posted by Orange Krate View Post
I am close to a monkey and did it... No error codes either. I have noticed something interesting though... people are running these without hose clamps and I think that is a recipe for an air leak. Correct me if I am wrong. See the link and trash me if you like.

http://www.camaro5.com/forums/showpo...&postcount=522
I have questioned it myself, but have been told that hose clamps are not needed. I am going to add them anyway for good measure.
__________________
2011 Camaro 2SS/RS, Circle D 3200, ADM Transmission Cooler, BTR Valvetrain, Cam Motion .621 .595 228/244 113+4, ARH 1 7/8, Cold Air Inductions, Katech C5R TC, Melling HV, BTR SLR lifters, Trunion Upgrade, LS2 Dampner, LS9 head gaskets, Bo White PTB, RX CC, GFX, Subs, Tuned by Rhino79 at GPI.
rberns is offline   Reply With Quote
Old 04-19-2013, 03:11 PM   #44
joep
 
Drives: 2012 45th anniversary edition
Join Date: Jan 2012
Location: Massachusetts
Posts: 12
I just revieved my RX catch can, no instructions or hose clamps, took almost 3 weeks to arrive. Please help me out, no one answers the phone!
joep is offline   Reply With Quote
Old 04-19-2013, 03:29 PM   #45
gahammerle

 
gahammerle's Avatar
 
Drives: 2010 Camaro LS M6 Inferno Orange
Join Date: May 2010
Location: Lebanon, OH
Posts: 1,626
Hose clamps are not needed. Been running mine for over 50k miles with no clamps. Can works great.
__________________
Gordy

Injen CAI / Solo Mach-X LLT / Solo High-flow res-cats / Barton short shifter / RX Catch Can / RPI Gills / 35% tint / LED Footwell Lighting Front & Rear / Pedders Street 1 / Pedders steering rack bushing / SS struts / Pfadt drop springs / VMax Ported Throttle Body / Spohn Toe Rods / Spohn Trailing Arms / Trifecta Tune / MACE 25mm Intake Spacers



Find me on Facebook:
http://www.facebook.com/gahammerle
gahammerle is offline   Reply With Quote
Old 04-19-2013, 03:45 PM   #46
GB EB


 
GB EB's Avatar
 
Drives: 2014 Stingray 2LT/Z51
Join Date: Feb 2010
Location: NAS PENSACOLA, FL
Posts: 2,457
dude ..... that sucks...

I'm sorry to hear that....

I installed mine without issues .... easy day.
__________________
*CAMARO5 CAMARO OF THE WEEK 3/21/11*
*1ST PLACE - NAVAL STATION SAN DIEGO CAR SHOW 4/17/11*
*PEOPLE'S CHOICE AWARD - SAN DIEGO FREEDOM FESTIVAL CAR SHOW 7/4/11*

*TROPHY RECIPIENT - GREATEST SHOW ON TURF 9/11/11*
*1ST PLACE MODERN MUSCLE - CORONADO SPEED FESTIVAL 9/23/11*
*AWARD OF EXCELLENCE - GOOD GUYS DEL MAR FALL NATIONALS 11/27/11*
*1ST PLACE / '82&UP CAMARO/FIREBIRD- FORT WALTON BEACH FF SHOW 2/16/13*
BUILD THREAD: http://www.camaro5.com/forums/showthread.php?t=120353
GB EB is offline   Reply With Quote
Old 04-19-2013, 04:02 PM   #47
SC2150
Account Suspended
 
Drives: 2012 Camaro RS, RX supercharged
Join Date: Dec 2009
Location: Bradenton, FL
Posts: 6,069
Hi Joep,

Clamps are not needed on the RX or the other good cans out there, so we dont include them. We have over 11,000 of these in use and the few times there has been a leak it is a broken fitting or drain left open.

Should be a note in each box explaining the instructions are on our website (if not, our fault and we appologize):

www.RevXtreme.com

look in the lower left corner, under information...click on instructions:

http://www.revxtreme.com/index.php?r...ormation_id=10

Should be all you need. If in a jam, we can walk you through it.

We have been trying to not raise the pricing on these so we have post instructions online to save on print cost. 2-3 week lead time is about right.....we are swamped with overwhelimng demand for these and the other products we manufacture, but are tooling up again to increase to meet demand so it's getting much better.

SC2150 is offline   Reply With Quote
Old 04-26-2013, 11:24 AM   #48
willhe64

 
willhe64's Avatar
 
Drives: 2012 45th Vert, 2011 4x4, 9sec Vega
Join Date: Mar 2012
Location: Canada
Posts: 2,177
Vacuum lines never need clamps. They are not holding pressure. The vacuum actually pulls the seal tighter.
__________________
I feel it only fair to warn you, I have a black belt in CAPS LOCK.
willhe64 is offline   Reply With Quote
Old 04-28-2013, 11:08 AM   #49
Sicilian Medic
 
Sicilian Medic's Avatar
 
Drives: 2010 Synergy Green Camaro
Join Date: Nov 2010
Location: Vail, AZ
Posts: 77
I am a female, and I installed mine over a year ago with no problems. If I had any questions, I emailed Tracy and he was more than obliging to help me.
__________________
Spectre C.A.I., Doug Thorley Shorty Headers, Flowmaster American Thunder Exhaust, Billet Fuel Door, Billet Front & Back Bowties, Tint, 4 Pack Gauge Cluster, Black Fender Flares and Black Gill Inserts, RX Catchcan w/ oil breather valve, VMAX T.B., Hurst Autostick shifter w/ plate and Spyder dual Halo headlamps.
Sicilian Medic is offline   Reply With Quote
Old 05-05-2013, 11:00 PM   #50
Fast6.3

 
Fast6.3's Avatar
 
Drives: 2011 2ssrs vert 2010 silverado 6.3
Join Date: Aug 2012
Location: El paso texas
Posts: 786
just my 2 cents bought an RX catchcan from a forum member, broke one of the fittings installing it. Called RX to buy a replacement fitting Tracey didnt sent me one for free didnt even charge postage didnt ask any questions to me thats superservice RX rocks they will have my business for sure
__________________
[SIGPIC][tsp 2" headers no cats solo axel back magnaflow x New Era OTR Intake pfadtted suspension
H&R springs koni
Fast6.3 is offline   Reply With Quote
Old 05-07-2013, 02:16 PM   #51
Motion427
Account Suspended
 
Drives: 2010 2SS/RS Red Jewel L99
Join Date: Jun 2011
Location: NB,Canada
Posts: 837
Lucky you can get your catch cans & other RX parts.
Ordered some for customers,been waiting for over 6 weeks now.Still on the back burner it looks like.
Customers are not happy,will have to go look for other options.
Motion427 is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Scrming's Rx Catch Can install & review scrming Camaro V6 LLT Engine, Exhaust, and Bolt-Ons 87 07-16-2015 06:29 PM
Elite Engineering PCV Oil Catch Cans | Instock | Best Prices with Free Shipping! JDP Motorsports V8 Bolt-Ons & Tunes 137 08-13-2014 03:06 PM
catch can research shows it's worthless kiteman Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 205 04-12-2014 06:15 PM
HELP! Power Reduced Message after installing catch can? CyberDan Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons 10 10-17-2010 08:23 PM


All times are GMT -5. The time now is 10:03 PM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.