Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 05-12-2013, 05:48 PM   #15
Detoxx03
ЯєŧąяĐ Єlímíиąŧ°я Ö
 
Detoxx03's Avatar
 
Drives: 2008 Corvette
Join Date: Oct 2010
Location: Woodward Avenue
Posts: 856
Quote:
Originally Posted by Padre View Post
I'm doing OK on the stock bottom end with a D1SC.

If I were doing it now, I'd be looking at the new i1 from ProCharger.

Padre
We're not discussin a stock bottom end. This guy had a 416 which needs to be fed by something bigger than a D1SC. I'm on a stock bottom end LS3 also with a D1SC and 4.5 pulley making 742. I know it won't last forever so it and when it lets to i'll do what needs to be done.
__________________

D1SC Procharger 881/773 on E85
A Futral Motorsports Creation
https://www.facebook.com/DetoxxAtomic
Detoxx03 is offline   Reply With Quote
Old 05-12-2013, 06:09 PM   #16
Padre
Only drives on Sundays
 
Padre's Avatar
 
Drives: 11 2SS/RS, Black/Inferno, L99 A6
Join Date: Feb 2011
Location: Dalton, GA
Posts: 2,416
Quote:
Originally Posted by Detoxx03 View Post
We're not discussin a stock bottom end. This guy had a 416 which needs to be fed by something bigger than a D1SC. I'm on a stock bottom end LS3 also with a D1SC and 4.5 pulley making 742. I know it won't last forever so it and when it lets to i'll do what needs to be done.
I gathered that. He's already bought the D1. If he wants to max it out for the 416, he might consider doing as I've done: wastegate and boost controller, which offers similar performance to the new i1.

Padre
__________________

The "Heretic": '11 2SS/RS L99 A6 Black/Inferno. Build Journal, Videos
D1SC GT9 JBA-LT = 720/680 | 10.330 @ 133.61, 1.546 sixty... Camaro King at ECS V, Darlington.
Padre is offline   Reply With Quote
Old 05-12-2013, 08:48 PM   #17
MANNYS2SS/RS

 
MANNYS2SS/RS's Avatar
 
Drives: 2010 Camaro 2SS/RS,LS3
Join Date: Oct 2010
Location: South Florida
Posts: 1,166
Quote:
Originally Posted by Detoxx03 View Post
We're not discussin a stock bottom end. This guy had a 416 which needs to be fed by something bigger than a D1SC. I'm on a stock bottom end LS3 also with a D1SC and 4.5 pulley making 742. I know it won't last forever so it and when it lets to i'll do what needs to be done.
Thats 742 hp to the fly wheel right.
__________________

LS-3, ProCharger D1SC
665. rwhp /562. rwtq @ 9.3 psi
MANNYS2SS/RS is offline   Reply With Quote
Old 05-12-2013, 09:41 PM   #18
Detoxx03
ЯєŧąяĐ Єlímíиąŧ°я Ö
 
Detoxx03's Avatar
 
Drives: 2008 Corvette
Join Date: Oct 2010
Location: Woodward Avenue
Posts: 856
Quote:
Originally Posted by MANNYS2SS/RS View Post
Thats 742 hp to the fly wheel right.
Nope don't deal in fly wheel numbers
__________________

D1SC Procharger 881/773 on E85
A Futral Motorsports Creation
https://www.facebook.com/DetoxxAtomic
Detoxx03 is offline   Reply With Quote
Old 05-13-2013, 07:47 AM   #19
MANNYS2SS/RS

 
MANNYS2SS/RS's Avatar
 
Drives: 2010 Camaro 2SS/RS,LS3
Join Date: Oct 2010
Location: South Florida
Posts: 1,166
Quote:
Originally Posted by Detoxx03 View Post
Nope don't deal in fly wheel numbers
WOW AWESOME NUMBERS! We have almost the same setup, except for the cam. I am also using a smaller blower (4.13) pulley, and I am nowhere near your power level. What else have you done? (Heads,Intake)
__________________

LS-3, ProCharger D1SC
665. rwhp /562. rwtq @ 9.3 psi
MANNYS2SS/RS is offline   Reply With Quote
Old 05-13-2013, 09:05 AM   #20
thebeast916

 
Drives: Blown G8 GT
Join Date: Apr 2010
Location: Orlando, FL
Posts: 782
I thinks those numbers are for his vette!
thebeast916 is offline   Reply With Quote
Old 05-13-2013, 09:06 AM   #21
thebeast916

 
Drives: Blown G8 GT
Join Date: Apr 2010
Location: Orlando, FL
Posts: 782
I thinks those numbers are for his vette!
thebeast916 is offline   Reply With Quote
Old 05-13-2013, 09:38 AM   #22
BullF-16
USAF retired! Thank God!
 
BullF-16's Avatar
 
Drives: 2011 1SS, 1LT red,1LT/RS SGM 98Z28
Join Date: Jul 2011
Location: North Texas
Posts: 2,782
Quote:
Originally Posted by MANNYS2SS/RS View Post
WOW AWESOME NUMBERS! We have almost the same setup, except for the cam. I am also using a smaller blower (4.13) pulley, and I am nowhere near your power level. What else have you done? (Heads,Intake)
Slap on that 4.00 pulley and you will be alot closer to 700whp
__________________
HKE LSX427(Mast blk lbl 305 6bolt LS7heads, PatG231/246 blower cam, RWHP/TQ: 1281/1133 SNL Performance Custom Twin PT6766 BB turbos 4 to 25psi selectable on the Boost Leash controller, Squash dual 400LPH/ID2000s, ALKY 4 gal meth, Autometer AFR/Bst/oilpres/oiltemp/fuelpress gauges, Pedders Justice road crs pkg: All HD bushes, supercar 12kg coil overs, supercar ZL1 sways, camber plates all setup by JusticePete! :Gforce 9" 35spline S-Trac, 1500hp Outlaw axles, 3.5"alum DS, Monster Triple disc; 4xForgeline 19x10.5 4xBridgestone 305/30R19 RE-11, CTS-v calipers/rotors/Cobalt friction XR1/3 pads
BullF-16 is offline   Reply With Quote
Old 05-13-2013, 09:51 AM   #23
MANNYS2SS/RS

 
MANNYS2SS/RS's Avatar
 
Drives: 2010 Camaro 2SS/RS,LS3
Join Date: Oct 2010
Location: South Florida
Posts: 1,166
Quote:
Originally Posted by BullF-16 View Post
Slap on that 4.00 pulley and you will be alot closer to 700whp
LOL it's coming
__________________

LS-3, ProCharger D1SC
665. rwhp /562. rwtq @ 9.3 psi
MANNYS2SS/RS is offline   Reply With Quote
Old 05-13-2013, 11:32 AM   #24
Detoxx03
ЯєŧąяĐ Єlímíиąŧ°я Ö
 
Detoxx03's Avatar
 
Drives: 2008 Corvette
Join Date: Oct 2010
Location: Woodward Avenue
Posts: 856
Quote:
Originally Posted by MANNYS2SS/RS View Post
WOW AWESOME NUMBERS! We have almost the same setup, except for the cam. I am also using a smaller blower (4.13) pulley, and I am nowhere near your power level. What else have you done? (Heads,Intake)
Nope just custom blower cam, headers, stock dual mode exhaust, alky control meth, and the blower with the 4.5 barely hitting 10psi.

Quote:
Originally Posted by thebeast916 View Post
I thinks those numbers are for his vette!
Correct
__________________

D1SC Procharger 881/773 on E85
A Futral Motorsports Creation
https://www.facebook.com/DetoxxAtomic
Detoxx03 is offline   Reply With Quote
Old 05-13-2013, 01:11 PM   #25
MANNYS2SS/RS

 
MANNYS2SS/RS's Avatar
 
Drives: 2010 Camaro 2SS/RS,LS3
Join Date: Oct 2010
Location: South Florida
Posts: 1,166
[QUOTE=Detoxx03;6538027]Nope just custom blower cam, headers, stock dual mode exhaust, alky control meth, and the blower with the 4.5 barely hitting 10psi.

Detoxx03 you have a sweet ride, it's cool to see that theirs quit a difference between the two car's. Plus it looks like your Futral custom cam doesn't bleed off boost like mine. I have to use a 4.13 pulley to get the same boost as you. I am thinking of putting a 4" pulley with a blow off valve like Padre did on his D1SC ProCharger.
__________________

LS-3, ProCharger D1SC
665. rwhp /562. rwtq @ 9.3 psi
MANNYS2SS/RS is offline   Reply With Quote
Old 05-13-2013, 01:39 PM   #26
thebeast916

 
Drives: Blown G8 GT
Join Date: Apr 2010
Location: Orlando, FL
Posts: 782
[QUOTE=MANNYS2SS/RS;6538382]
Quote:
Originally Posted by Detoxx03 View Post
Nope just custom blower cam, headers, stock dual mode exhaust, alky control meth, and the blower with the 4.5 barely hitting 10psi.

Detoxx03 you have a sweet ride, it's cool to see that theirs quit a difference between the two car's. Plus it looks like your Futral custom cam doesn't bleed off boost like mine. I have to use a 4.13 pulley to get the same boost as you. I am thinking of putting a 4" pulley with a blow off valve like Padre did on his D1SC ProCharger.
DO IT!
thebeast916 is offline   Reply With Quote
Old 05-13-2013, 01:51 PM   #27
Detoxx03
ЯєŧąяĐ Єlímíиąŧ°я Ö
 
Detoxx03's Avatar
 
Drives: 2008 Corvette
Join Date: Oct 2010
Location: Woodward Avenue
Posts: 856
[QUOTE=MANNYS2SS/RS;6538382]
Quote:
Originally Posted by Detoxx03 View Post
Nope just custom blower cam, headers, stock dual mode exhaust, alky control meth, and the blower with the 4.5 barely hitting 10psi.

Detoxx03 you have a sweet ride, it's cool to see that theirs quit a difference between the two car's. Plus it looks like your Futral custom cam doesn't bleed off boost like mine. I have to use a 4.13 pulley to get the same boost as you. I am thinking of putting a 4" pulley with a blow off valve like Padre did on his D1SC ProCharger.
You can pm your cam specs if you want. Curious what size it is. Yeah you can throw a waste gate on it.
__________________

D1SC Procharger 881/773 on E85
A Futral Motorsports Creation
https://www.facebook.com/DetoxxAtomic
Detoxx03 is offline   Reply With Quote
Old 05-13-2013, 03:08 PM   #28
MANNYS2SS/RS

 
MANNYS2SS/RS's Avatar
 
Drives: 2010 Camaro 2SS/RS,LS3
Join Date: Oct 2010
Location: South Florida
Posts: 1,166
[QUOTE=Detoxx03;6538552]
Quote:
Originally Posted by MANNYS2SS/RS View Post

You can pm your cam specs if you want. Curious what size it is. Yeah you can throw a waste gate on it.
It's 227/239 .614/.624 on a 115+3 LS
__________________

LS-3, ProCharger D1SC
665. rwhp /562. rwtq @ 9.3 psi
MANNYS2SS/RS is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:16 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2016, vBulletin Solutions, Inc.