Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums -
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - > Marketplace > Members Classifieds - Parts for sale or wanted > Forced Induction

Thread Tools
Old 05-19-2013, 08:16 AM   #1
Drives: c5
Join Date: Oct 2010
Location: toronto
Posts: 4
tvs 1900 off C5 head unit.

4 sale a 1900tvs off a C5 vet. plus a non intercooled manifold and fuel rails, 2 jack shafts, are included. Located in toronto.

Before you say there was never a 1900 kit for a c5, it has been used for 3 years, this was mounted on a the 112 non intercooled manifold for ls1 style heads and the jack shaft is cut down to fit. The 112 manifold broke and I could not replace it with an intercooled one from Magnuson, so I went with an eforce. The blower is V-belt driven.

there are no issues with the blower it is 100% working, if you want references call Champion Motors in toronto, they know me. I swapped it out for an Eforce. No meth or water has gone through this blower.

This picture is as removed from the motor, showing the crack in the 112 lower manifold (see rear belt)

I want $1000 plus shipping.


both jackshafts are built for the C5 vet mount. A drive line shop can easily make one with these parts, which is what I did. the manifold that is included has to be modified to fit the 1900 blower and then it would bolt onto a C5, non intercooled.

the reason I didnt do that is that I wanted to install an intercooler and Magnuson or anyone else would not sell it for the C5.

Last edited by acric5; 05-20-2013 at 09:36 AM.
acric5 is offline   Reply With Quote

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

All times are GMT -5. The time now is 01:29 PM.

Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.