Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Phastek Performance
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Specific Models / Packages > Camaro 1LE Forum

Camaro 1LE Forum Camaro 1LE Package releated discussions

Reply
 
Thread Tools
Old 05-17-2013, 10:18 AM   #1
Dropspeed
2013 Camaro SS1LECTSVZ28
 
Dropspeed's Avatar
 
Drives: 2013 AGM 1SS/1LE
Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 1,574
ZL1 Splash Guards on 1LE

I installed my ZL1 rear splash guards on my 2013 1LE last night with a little twist.

The factory install requires rivets to attach the splash guards to the rear fascia....I prefer to utilize something that can be removed at any time and I did not like the view of the unused hole from the back of the car.

I got some OE Push Screw Clips made from black Poly Pro (used for trim pieces, splash shields, fender liners ect) and decided to use these to hold the ZL1 splash shields in place. when the screw is inserted the clipd expands. These are removable, they unscrew, will not rust, corrode fall out....and are very light weight

I did find that the holes on the splash shields varied slightly in size, especially the second from the bottom, so I cleaned then up with a small razor blade (drill bit would have worked too)

Pictures speak a 1000 words....

-Matt

NOTE: I will gladly send you some if you cover S&H. PM me.
Attached Images
   
__________________

Last edited by Dropspeed; 05-22-2013 at 09:22 AM.
Dropspeed is offline   Reply With Quote
Old 05-17-2013, 11:36 AM   #2
Monte Mac
 
Monte Mac's Avatar
 
Drives: 13 1LE, 14 Cruze ECO M6, 84 MonteSS
Join Date: May 2009
Location: Deaborn Heights, MI
Posts: 439
Nice work Matt. I am having the whole ZL1 diffuser put on mine (when it shows up) so I'm not worried if its permanent or not.

Looks great though!
__________________



[B]Ordered 3/8/13
TPW 4/15/13
Built 4/15/13
Bayed 4/18/13
Released from QC HOLD 5/22/13
PERMAGRIN INSTALLED 5/30/13
Monte Mac is offline   Reply With Quote
Old 05-17-2013, 12:55 PM   #3
Nick S

 
Nick S's Avatar
 
Drives: 2013 Camaro 1LE / 2002 Camaro SS
Join Date: Jul 2012
Location: Verona, WI
Posts: 868
I just used some zip ties to hold them on. If I need to take them off I can just cut the ties and then put a new one back on when needed. But your's will look a little more factory that way too.
__________________

2013 Victory Red 2SS/1LE W/RS/NPP
2002 Bright Rally Red Camaro SS 6-speed Manual
Nick S is offline   Reply With Quote
Old 05-17-2013, 12:56 PM   #4
Nick S

 
Nick S's Avatar
 
Drives: 2013 Camaro 1LE / 2002 Camaro SS
Join Date: Jul 2012
Location: Verona, WI
Posts: 868
Nice pics too. I took some pics of my install too because I was going to post some pics but then Tramtwo had pretty much posted all the info in his build thread so I decided not to post any at that point.
__________________

2013 Victory Red 2SS/1LE W/RS/NPP
2002 Bright Rally Red Camaro SS 6-speed Manual
Nick S is offline   Reply With Quote
Old 05-17-2013, 01:00 PM   #5
Dropspeed
2013 Camaro SS1LECTSVZ28
 
Dropspeed's Avatar
 
Drives: 2013 AGM 1SS/1LE
Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 1,574
Thanks,

Yes, All race cars have zip ties!!! and I almost did that myself but took it a step further...

(I spend an hour getting the plate and frame to sit right (after the 3rd frame was purchased) ...Cut a mm from each side of my lic plate off and then wrapped just the edge in black vinyl so you cant see it on the side of the frame from an angle!!!! YEAH I GOT PROBLEMS!)

I am not selling the fasteners, but do have a bunch of extras....Someone just PM'd me and asked if they cover shipping if I would send them?.....Yes, no problem.

-Matt
__________________
Dropspeed is offline   Reply With Quote
Old 05-17-2013, 05:58 PM   #6
Nick S

 
Nick S's Avatar
 
Drives: 2013 Camaro 1LE / 2002 Camaro SS
Join Date: Jul 2012
Location: Verona, WI
Posts: 868
I'll bet the back up camera being slightly off center is just driving you nuts then!!
__________________

2013 Victory Red 2SS/1LE W/RS/NPP
2002 Bright Rally Red Camaro SS 6-speed Manual
Nick S is offline   Reply With Quote
Old 05-17-2013, 07:29 PM   #7
JimE


 
JimE's Avatar
 
Drives: 2013 2SS/RS/1LE
Join Date: Apr 2010
Location: St Louis, MO
Posts: 2,267
Those are the rear ZL1 splash guards correct?

The holes should match up to the existing screws holding the inner liner in place. You simply remove the two screws, pull the adhesive cover off the 3M tape, slide the splash guard BEHIND the inner liner and press the tape firmly to the fender edge, then reinstall the existing screws.

At least that is how it was on my 2013 1LE. No additional fasteners were needed.
__________________
Perm-a-grin in place.....
JimE is offline   Reply With Quote
Old 05-17-2013, 08:04 PM   #8
Dropspeed
2013 Camaro SS1LECTSVZ28
 
Dropspeed's Avatar
 
Drives: 2013 AGM 1SS/1LE
Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 1,574
Quote:
Originally Posted by JimE View Post
Those are the rear ZL1 splash guards correct?

The holes should match up to the existing screws holding the inner liner in place. You simply remove the two screws, pull the adhesive cover off the 3M tape, slide the splash guard BEHIND the inner liner and press the tape firmly to the fender edge, then reinstall the existing screws.

At least that is how it was on my 2013 1LE. No additional fasteners were needed.
Yes factory ZL1

Agree with most. But there are two holes that line up with the non used holes on the SS rear fascia. The factory secures these with rivets, I use the push screws. If you only used the tape and the existing screws only one went through the slash guard.

Look at picture 2 and 3 above and you can see the yellow outline area are the push screws and the silver clips are where the fender liner screws go.
Matt
__________________
Dropspeed is offline   Reply With Quote
Old 07-10-2013, 12:59 PM   #9
was619
Billy The Kid
 
was619's Avatar
 
Drives: Cyber Grey 2SS/RS
Join Date: Jun 2009
Location: North Alabama
Posts: 611
Hey Matt,

can you give out the part number for these Push screws?
I'd like to try and get them from my local parts department.

Thanks
-Will
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension,
MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners
Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels
was619 is offline   Reply With Quote
Old 07-10-2013, 01:03 PM   #10
Toxikk
Lead Dev for Autoblog.com
 
Drives: GBA 13 2SS/1LE (Medusa)
Join Date: Mar 2013
Location: DC Metro Area
Posts: 255
oh, they are not attached to the diffuser? i looked at them on a zl1 at my dealer and they seemed like one solid piece. maybe i need to look harder. either way, i think i want both on my 1le if they are in fact separate
__________________
2013 1LE/GBA/2SS/RS/NPP/NAV
Toxikk is offline   Reply With Quote
Old 07-10-2013, 03:25 PM   #11
willc1980
 
Drives: 2013 Camaro SS 1LE
Join Date: Jul 2013
Location: Wyandotte, MI
Posts: 158
the splash guards you have are an OE piece from Chevy or aftermarket??
willc1980 is offline   Reply With Quote
Old 07-10-2013, 08:20 PM   #12
JimE


 
JimE's Avatar
 
Drives: 2013 2SS/RS/1LE
Join Date: Apr 2010
Location: St Louis, MO
Posts: 2,267
Quote:
Originally Posted by willc1980 View Post
the splash guards you have are an OE piece from Chevy or aftermarket??
Those are the factory ZL1 guards.
__________________
Perm-a-grin in place.....
JimE is offline   Reply With Quote
Old 07-10-2013, 10:26 PM   #13
willc1980
 
Drives: 2013 Camaro SS 1LE
Join Date: Jul 2013
Location: Wyandotte, MI
Posts: 158
http://www.rpidesigns.com/shop/item.aspx?itemid=2271

thoughts on these??
willc1980 is offline   Reply With Quote
Old 07-11-2013, 02:27 AM   #14
tramtwo


 
tramtwo's Avatar
 
Drives: 2013 1LE
Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,554
Nice job... did it this way. These cars really should come with splash guards given the size of the tires.



http://i246.photobucket.com/albums/g...ps823c9de4.jpg
__________________
tramtwo is offline   Reply With Quote
Old 07-11-2013, 08:40 PM   #15
JimE


 
JimE's Avatar
 
Drives: 2013 2SS/RS/1LE
Join Date: Apr 2010
Location: St Louis, MO
Posts: 2,267
Quote:
Originally Posted by willc1980 View Post
I don't know of anyone that has used those rears. In any case, you can get the OEM version for $28 ea.
__________________
Perm-a-grin in place.....
JimE is offline   Reply With Quote
Old 07-11-2013, 08:47 PM   #16
Dropspeed
2013 Camaro SS1LECTSVZ28
 
Dropspeed's Avatar
 
Drives: 2013 AGM 1SS/1LE
Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 1,574
Quote:
Originally Posted by was619 View Post
Hey Matt,

can you give out the part number for these Push screws?
I'd like to try and get them from my local parts department.

Thanks
-Will
Hello Will,

I can not give you the part number as these are not Chevrolet parts....The company I work for makes these and the tools are owned by another OEM....I also cannot sell these to you, however if you want to paypay a few bucks to cover S&H I will gladly send you some.



Quote:
Originally Posted by Toxikk View Post
oh, they are not attached to the diffuser? i looked at them on a zl1 at my dealer and they seemed like one solid piece. maybe i need to look harder. either way, i think i want both on my 1le if they are in fact separate
The ZL1 is attached at all locations. When installing the factory ZL1 splash guards on a non-ZL1 the bottom attachment point is not used as the non ZL1 bumper has nothing hanging in that area to attach the splash guard to.



Quote:
Originally Posted by willc1980 View Post
the splash guards you have are an OE piece from Chevy or aftermarket??
OEM ZL1. I purchased mine from Rodgers Chevrolet

-Matt
__________________
Dropspeed is offline   Reply With Quote
Old 07-12-2013, 03:30 AM   #17
was619
Billy The Kid
 
was619's Avatar
 
Drives: Cyber Grey 2SS/RS
Join Date: Jun 2009
Location: North Alabama
Posts: 611
Pm sent.
__________________
CGM 2SS/RS[SIZE="1"]
Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension,
MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners
Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels
was619 is offline   Reply With Quote
Old 07-12-2013, 11:11 AM   #18
willc1980
 
Drives: 2013 Camaro SS 1LE
Join Date: Jul 2013
Location: Wyandotte, MI
Posts: 158
Quote:
Originally Posted by Dropspeed View Post

OEM ZL1. I purchased mine from Rodgers Chevrolet

-Matt

OK just called there and they said these are $208 for all 4 painted in body color. Do they come in just flat black ABS plastic?? can u get me a part number?
willc1980 is offline   Reply With Quote
Old 07-12-2013, 11:13 AM   #19
tramtwo


 
tramtwo's Avatar
 
Drives: 2013 1LE
Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,554
Quote:
Originally Posted by willc1980 View Post
OK just called there and they said these are $208 for all 4 painted in body color. Do they come in just flat black ABS plastic?? can u get me a part number?
Call back... U want ZL1 splashgards.

Sent from my DROID RAZR using Tapatalk 2
__________________
tramtwo is offline   Reply With Quote
Old 07-12-2013, 11:36 AM   #20
beany323

 
beany323's Avatar
 
Drives: Camaro 2SS /RS/1LE
Join Date: Sep 2012
Location: Southern Cali.
Posts: 1,262
Quote:
Originally Posted by tramtwo View Post
Call back... U want ZL1 splashgards.

Sent from my DROID RAZR using Tapatalk 2
part # by chance?

good info op!
__________________
"The fact the GT500 can barely beat a $37k car with 200 less horsepower speaks volumes. There are about a million mods you can do to a LS3 to make a Camaro do the 1/4 faster then a GT500." (Vroom.)

Updated w/ Willow Springs:
1. Nissan GTR Track Pack 1:19.6 2. Ducati 1198 S 1:19.7 3. Nissan GTR 1:20.3 4. Corvette Z06 1:20.4
5. Audi R8 V10 Plus 1:22.0 6. Ferrari 458 Italia 1:22.3
7. CAMARO SS 1LE 1:22.7
8. Shelby GT 500 1:23.5
9. Mustang Gt Track Pack 1:25.8
beany323 is offline   Reply With Quote
Old 07-12-2013, 12:47 PM   #21
tramtwo


 
tramtwo's Avatar
 
Drives: 2013 1LE
Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,554
Quote:
Originally Posted by beany323 View Post
part # by chance?

good info op!
In my build thread... click my signature picture and then scroll down about half way.
__________________
tramtwo is offline   Reply With Quote
Old 07-18-2013, 01:38 PM   #22
joshylife
lift.eat.money.sleep.
 
joshylife's Avatar
 
Drives: 2013 2SS 1LE
Join Date: Nov 2012
Location: Eureka CA
Posts: 65
Anyone have the link for the oem slpash guards? My 1le needs these
joshylife is offline   Reply With Quote
Old 07-18-2013, 01:43 PM   #23
Dropspeed
2013 Camaro SS1LECTSVZ28
 
Dropspeed's Avatar
 
Drives: 2013 AGM 1SS/1LE
Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 1,574
Quote:
Originally Posted by joshylife View Post
Anyone have the link for the oem slpash guards? My 1le needs these

Part numbers:


SHIELD,RR BPR FASCIA SPH - RH 22895336
SHIELD,RR BPR FASCIA SPH - LH 22895337


Link:

https://www.google.com/






__________________
Dropspeed is offline   Reply With Quote
Old 07-18-2013, 04:40 PM   #24
tramtwo


 
tramtwo's Avatar
 
Drives: 2013 1LE
Join Date: Jul 2011
Location: N'Awlinz
Posts: 6,554
Quote:
Originally Posted by Dropspeed View Post
Part numbers:


SHIELD,RR BPR FASCIA SPH - RH 22895336
SHIELD,RR BPR FASCIA SPH - LH 22895337


Link:

https://www.google.com/






Post of the day!

Sent from my DROID RAZR using Tapatalk 2
__________________
tramtwo is offline   Reply With Quote
Old 07-22-2013, 01:25 PM   #25
joshylife
lift.eat.money.sleep.
 
joshylife's Avatar
 
Drives: 2013 2SS 1LE
Join Date: Nov 2012
Location: Eureka CA
Posts: 65
Google failed me which is why I came back to this exact post and asked. Thanks thought for the ever so often google link drop, the snide sarcastic humor you use is so rare and clever These days.
joshylife is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 09:38 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2014, vBulletin Solutions, Inc.